Din Rail Power Supplies
Showing 61–75 of 219 results
-
More information Compare240W 24V 10A Wide Input Range Industrial Din Rail Power Supply
240W 24V 10A Wide Input Range Industrial Din Rail Power Supply
-
More information Compare240W 48V 5A Din Rail Power Supply with PFC Function
240W 48V 5A Din Rail Power Supply with PFC Function
-
More information Compare240W 48V 5A PFC Function Din Rail Power Supply
The DRP-240 series is a 240W single output industrial din rail power supply with pfc function. Cooling by free air convection allows an operating temperature of -10~+70°C and offers protections…
-
More information Compare
240W 48V 5A Wide Input Range Industrial Din Rail Power Supply
240W 48V 5A Wide Input Range Industrial Din Rail Power Supply
-
More information Compare
240W Single Output DIN RAIL Power Supply
240W Single Output DIN RAIL Power Supply
Features
- Universal AC input/Full range
- Built in PFC circuit
- Installed on DIN rail TS35/7.5 or 15
- Short circuit, over voltage, over load & over temperature protections
- Cooling by free air convection
- 100% full load burn in
- UL 508(industrial control equipment) approved
- Fixed switching frequency at 100KHz
- LED indication for power on
-
More information Compare240W Single Output Industrial Din Rail Power Supplies
240W Single Output Industrial Din Rail Power Supplies
Features
- Single and two phase wide input range 180~550VAC
- High efficiency 91% and low power dissipation
- Protections: Short circuit / Overload / Over voltage / Over temperature
- Cooling by free air convection
- Can be installed on DIN rail TS-35/7.5 or 15
- UL 508(industrial control equipment)approved
- EN61000-6-2(EN50082-2) industrial immunity level
- Built-in DC OK relay contact
- 100% full load burn-in test
-
More information Compare240W Single Output Industrial Din Rail PSU
240W Single Output Industrial Din Rail PSU
Features
- Built-in active PFC function, PF>0.93
- High efficiency 93% and low power dissipation
- Short circuit, over load, over voltage, over temperature protections
- Cooling by free air convection
- Built-in constant current limiting circuit
- Can be installed on DIN rail TS-35/7.5 or 15
- UL 508(industrial control equipment)approved
- EN61000-6-2(EN50082-2) industrial immunity level
- Built-in DC OK Relay contact
- 100% full load burn-in test
- 150% peak load capability
-
More information Compare240W Three Phase Industrial DIN Rail Power Supply
240W Three Phase Industrial DIN Rail Power Supply
Features
- Three-Phase AC 340 ~ 550V wide range input
- High efficiency 89% and low dissipation
- Short circuit, over load, over voltage & over temperature protections
- Cooling by free air convection
- Built-in constant current limiting circuit
- Can be installed on DIN rail TS-35/7.5 or 15
- UL 508(industrial control equipment)approved
- EN61000-6-2(EN50082-2) industrial immunity level
- 100% full load burn-in test
-
More information Compare24V 20A 2 Input Channel Din Rail 1+1 1+N Redundancy Module
24V 20A 2 input channel din rail 1+1 1+N redundancy module
-
More information Compare24V 20A Din Rail Redundant Module
20A redundancy (decoupling) module for 24Vdc power system. Containing 2 sets of 20A Or-ing diodes with wonderful heat dissipation deployment, DR-RDN20 gives you a new option for safe connection of…
-
More information Compare24V 240W Slim Three Phase Industrial DIN Rail with PFC Function
24V 240W Slim Three Phase Industrial DIN Rail with PFC Function
Features
- Three phase 340 ~ 550VAC wide range input (Dual Phase operation possible)
- 63mm slim width
- Built-in passive PFC function compliance to EN61000-3-2
- High efficiency 92% and low power dissipation
- Protection: short circuit / overload / over voltage / over temperature
- Cooling by free air convection
- Full power between -30 ~ +60°C
- Built-in constant current limiting circuit
- Can be installed on DIN rail TS-35/7.5 or 15
- UL61000-6-2 (EN50082-2) industrial immunity level
- DC OK relay contact
- 3 years warranty
-
More information Compare24V 40A 960W Three Phase DIN RAIL with PFC Function
24V 40A 960W Three Phase DIN RAIL with PFC Function
-
More information Compare24V 40A 960W Ultra Slim DIN Rail Power Supply
24V 40A 960W Ultra Slim DIN Rail Power Supply
-
More information Compare24V 60W Ultra Wide Input Industrial DIN Rail Power Supply
WDR-60-24 is a 60W DIN rail power supply with ultra-wide AC input range, suitable for industrial automation, surveillance and telecommunication applications.
Features
- 180 ~ 550VAC ultra wide input for 1-phase or 2-phase
- 32mm slim width
- 4.7KVAC I/O high isolation (reinforced isolation)
- Protections: short circuit / overload / over voltage / over temperature
- Cooling by free air convection
- Can be installed on DIN rail TS-35/7.5 or 15
- -30~+85°C ultra wide operating temperature (>+60°C derating)
- Over voltage category III
- DC OK relay contact
- DC output voltage adjustable (+20%)
- 3 years warranty
-
More information Compare24V/20A DIN Rail Type Buffer Module
The DBUF20-24 is a DIN Rail mounted 20A buffer module which can be used with DIN rail power supplies to provide short term back up for the load.
Features
- Buffering with electrolytic capacitors instead of lead acid batteries
- Type buffering time of 350ms @22VDC/20A
- Buffer mode selectable by switch: Fixed mode at 22VDC – Dynamic mode for Vin-1 VDC
- LED indicator for signal status
- Supports parallel connection to extend buffering time
- Cooling by free air convection
- -25 ~+ 75°C wide operating temperature
- 3 years warranty
Sunpower’s DIN rail power supplies range is available in an array of different form factors and power ratings, starting at 10W going up to 960W with output voltages from 5 to 48 volts. All of our DIN rail power supplies are of a fan less design but each individual product has their unique functions and input characteristics, whether it be a wide or high input range, or one, two or three phase operation.
All of our products are installed on DIN rail TS35/7.5 or 15 and the majority of our DIN rail power supply units come with built-in PFC. Other features within our DIN rail power supply units include low no load power consumption, DC OK relay contact and high efficiency. A number of the larger DIN rail power supply units that we stock also have a parallel function so that current sharing can be achieved which allows for installs to be created of up to 3840W with redundancy and UPS modules also available.
Our DIN rail power supplies are designed for use in industrial, automation and process control applications and meet the requirements of UL508, for industrial control equipment and will provide the power solution to meet your necessary requirements.
To help you with any specific DIN Rail Power Supply requirements or questions Sunpower’s friendly and expert team will be happy to talk to you to discuss your options. Feel free to call us on 0118 9823746 for further information.