Enclosed Power Supply
Showing 16–30 of 1759 results
-
More information Compare100.8W 48V 2.1A DC-DC DIN Rail Type Converter
DDR-120A-48 is a 100.8W 48V 2.1A DC-DC DIN Rail Type Converter that enables DIN Rail DC/DC integration into higher power applications.
Features
- Compliance to EN50155 and EN45545-2 railway standard
- Width only 32mm
- 2:1 wide input range
- -40~+70°C wide working temperature
- 150% peak load capability
- DC output adjustable
- Cooling by free air convection
- Can be installed on DIN rail TS-35/7.5 or 15
- Protections: Short circuit / Overload / Over voltage /Input reverse polarity / Input under voltage protection
- 4KVdc I/O isolation(Reinforced isolation)
- 3 years warranty
-
More information Compare100.9W Quad Output PFC Switchmode Power Supply
The QP-100 series is a 100W quad output enclosed power supply with PFC function. Protections including short circuit, overload and over voltage. Cooling by free air convection allows an operating…
-
More information Compare10000W Enclosed Power Supplies with Parallel Function and PFC
10000W Enclosed Power Supplies with Parallel Function and PFC
Features
- 3 Phase 3 wire △ AC 196 ~ 305V or 3 Phase 4 wire Y AC 340 ~ 530V wide range input
- High efficiency up to 91%
- Built-in active PFC function
- Short circuit, Over load, Over voltage, Over temperature, Fan fail protections
- Forced air cooling by built-in DC with fan speed control function
- Output voltage can be trimmed between 20~110% of the rated output voltage by 1-6VDC external control signal
- Output current can be adjusted between 20~100% of the rated output current by 1-5VDC external control signal
- Current sharing up to 2 units
- Alarm signal output (relay contact and open collector signal): AC fail, DC OK, fan fail, OTP
- Built-in 12V/0.1A auxiliary output for remote control
- Built-in remote ON-OFF control
- Built-in remote sense function
- 5 years warranty
-
More information Compare1000W 36V 27.8A Active PFC Enclosed Power Supply
SPS-1000P Series are 1000W single output power supplies with high efficency and wide operating temperatures from -20C to +70C. Standard features include remote control, remote sense, power good signal and…
-
More information Compare1000W AC/DC Industrial Power Supplies with PFC and Parallel Function
PSPA-1000 series is a 1KWÂ single output enclosed type AC/DC power supply.Features
-
Universal AC input / Full range
-
Built-in active PFC function
-
Protections: Short circuit / Overload / Over voltage / Over temperature
-
Forced air cooling by built-in DC fan
-
Current sharing up to 4000W (3+1)
-
With DC OK Signal output
-
Built-in remote ON-OFF control
-
Built-in remote sense function
-
5 years warranty
-
-
More information Compare1000W Modular Power Power Supply
Switching power supplies with modular design that consists of 2 stages; Front end PFC and output modules. Using zero voltage switching technology to realize the power factor correction, the line…
Features
- Universal input voltage
- Uses ZVS technology to reduce power dissipation and improve efficiency
- Large range of output configurations available
- Remote control on each module
- Remote sense on MS-75, 150 & 300 modules
- Built in active PFC, PF>0.95
- Built in parallel function on MS-300
- Fan alarm function
- Forced air cooling
-
More information Compare1000W PFC Parallel Function Enclosed Power Supply
1000W PFC Parallel Function Enclosed Power Supply
Features
- Universal AC input
- 1U low profile
- High power density 10.67/in3
- Built in Active PFC circuit
- Short circuit, over load, over voltage & over temperature protections
- Built in ON/OFF control and remote sense
- Trimable output voltages
- DC OK signal output
- Built in active current sharing
- High efficiency up to 90%
- Built in 5V/0.5A auxiliary output
-
More information Compare
1000W Single Output AC/DC PFC Enclosed Power Supply
SPS-1000P Series are 1000W single output power supplies with high efficency and wide operating temperatures from -20C to +70C. Standard features include remote control, remote sense, power good signal and…
Features
- Universal AC input with active power factor correction, P.F.>0.95
- Inrush current limit soft start function
- Over voltage, over load, short circuit protection
- Over temperature protection
- Output voltage ±10% adjustment
- Output voltage remote sense ＆ remote control ON/OFF
- Power good signal output
- Current sharing function, 3+1 up to 4KW
- Forced air cooling by built in DC fan
- Built in 5V/0.5A auxiliary output
- 1U low profile
- UL, cUL, TUV, CB, CE standard
-
More information Compare10080W 48V 210A Enclosed Power Supply with PFC and Parallel Function
10080W 48V 210A Enclosed Power Supply with PFC and Parallel Function
-
More information Compare
1008W 24V 42A with PFC and Parallel Function
PSPA-1000-24Â is a 1008W, 24V, 42A enclosed type AC/DC power supply.
-
More information Compare
1008W 48V 21A Active PFC Enclosed Power Supply
SPS-1000P Series are 1000W single output power supplies with high efficency and wide operating temperatures from -20C to +70C. Standard features include remote control, remote sense, power good signal and…
-
More information Compare1008W 48V 21A PFC Parallel Function PSU
1008W 48V 21A PFC Parallel Function PSU
-
More information Compare
1008W 48V 21A with PFC and Parallel Function
PSPA-1000-48 is a 1008W, 48V, 21A enclosed type AC/DC power supply.
-
More information Compare100W 12V & 5V Isolated Output Enclosed Power Supply
SPS-100P-ID are a range of dual isolated output encolsed power supplies with power factor correction. Featureing wide operating temperatures from -20°C to +70°C and high efficiency up to 83% these…
-
More information Compare100W 1U Single Output Enclosed Power Supplies with PFC Function
100W 1U Single Output Enclosed Power Supplies with PFC Function
Features
- Universal full range AC input
- Built-in active PFC function
- Short circuit, over load, over voltage, over temperature protections
- Built-in constant current limiting circuitry
- Cooling by free air convection
- 1U low profile 30mm
- Remote On-Off Control
- LED indicator for power on
An enclosed power supply is typically perceived as the metal cased variety; the benefit of this is to stop components being exposed & in turn providing an extra measure of safety for service personnel of end user systems. Encapsulated power supplies are also included under the enclosed power supply banner on our site as they also protect components and may offer your application the most suitable specifications.
Sunpower’s enclosed power supply range offer flexible OEM power solutions from 5W to 3000W in single, dual, triple and quad outputs; our parallel units have the functionality to take this up to 9000W. Our enclosed power supplies have varied function, including full range input, active power factor correction, low no load power consumption, programmable outputs and even medical safety approval to MOOP levels; the majority of which have short circuit, over load and over voltage protections.
Whether you are looking for a high reliability miniature, PFC, modular, programmable or UPS function; from the encapsulated APC Series to the large Parallel function RSP’s you are sure to find the enclosed power supply you need from Sunpower.