Featured Power Supplies
Showing 16–30 of 673 results
-
More information Compare1000W Modified Sine Wave DC-AC Power Inverter
A300-1K0 series is a modified sine wave DC/AC inverter that can provide 1000W continuously and possesses 1200W for up to 30 minutes and 2400W of surge peak load capability. Protections for this unit include battery low alarm, battery low shutdown, battery polarity, battery over voltage protection for input side; short circuit, inverter overload, and over…
Features
- 12V or 24V DC input
- Power ON-OFF switch
- Input voltage range: -15% ~ +25%
- Output voltage regulation: ±10%
- Bat. Low alarm/Bat. Low shutdown/Over voltage/Over temp./Output short/Input polarity reverse/Overload protection
- Output waveform: Modified sine wave
- Cooling fan ON-OFF control
- Topology: Microprocessor
- Approvals: e13/ CE
-
More information Compare1000W Modular Power Power Supply
Switching power supplies with modular design that consists of 2 stages; Front end PFC and output modules. Using zero voltage switching technology to realize the power factor correction, the line input is rectified into high DC voltage by the front end PFC stage, and then the DC output modules will transfer the operating voltage into…
Features
- Universal input voltage
- Uses ZVS technology to reduce power dissipation and improve efficiency
- Large range of output configurations available
- Remote control on each module
- Remote sense on MS-75, 150 & 300 modules
- Built in active PFC, PF>0.95
- Built in parallel function on MS-300
- Fan alarm function
- Forced air cooling
-
More information Compare1000W PFC Parallel Function Enclosed Power Supply
With power factor correction and parallel function this series targets 1U low profile and high wattage applications. Featuring 10.67W/in3 extremely high power density RSP-1000 series can provide rated output wattage even at 100VAC input because of its high efficiency design. With built in trimming function the output voltage can be adjusted between 40% and 110%…
Features
- Universal AC input
- 1U low profile
- High power density 10.67/in3
- Built in Active PFC circuit
- Short circuit, over load, over voltage & over temperature protections
- Built in ON/OFF control and remote sense
- Trimable output voltages
- DC OK signal output
- Built in active current sharing
- High efficiency up to 90%
- Built in 5V/0.5A auxiliary output
-
More information Compare1000W Single Output DC-DC Converter
SD-1000 Series enclosed 1U DC-DC converter, for the growing demand of high wattage dc/dc applications. Features 4:1~2:1 wide DC input range and 2000VAC input/output isolation, with 19~72V input levels. Other standard features include 12V/0.25A auxiliary output, output OK signal, remote on/off control and remote sense functions as well as short circuit, over load, over voltage…
Features
- 2000Vac I/O Isolation
- Short circuit, over load, over voltage, over temperature protections
- Forced air cooling by built-in DC fan with fan speed control
- High power density 10.7W/inch³
- 1U low profile, 41mm
- SD-1000L type input voltage design to LVD
- Output OK signal
- Built-in remote ON-OFF control
- Built-in remote sense function
-
More information Compare
1000W Single Output DC-DC Converter
SD-1000 Series enclosed 1U DC-DC converter, for the growing demand of high wattage dc/dc applications. Features 4:1~2:1 wide DC input range and 2000VAC input/output isolation, with 72~144V input levels. Other standard features include 12V/0.25A auxiliary output, output OK signal, remote on/off control and remote sense functions as well as short circuit, over load, over voltage…
Features
- 2000Vac I/O Isolation
- Short circuit, over load, over voltage, over temperature protections
- Forced air cooling by built-in DC fan with fan speed control
- High power density 10.7W/inch³
- 1U low profile, 41mm
- Output OK signal
- Built-in remote ON-OFF control
- Built-in remote sense function
-
More information Compare1000W True Sine Wave DC-AC Power Inverter
TS-1000 is a high performance true sine wave DC/AC power inverter that uses high frequency circuit topology. With high efficiency up to 92% this dc/ac inverter can provide 1000W continuously and peak load of 1150W for 3 minutes, 1500W for 10 seconds or 2000W surge power for 30 utility cycles.
Features
- True sine wave output (THD<3%)
- High surge power up to 2000W
- High efficiency up to 92%
- Power ON-OFF switch
- Standby saving mode can be selected
- Front panel indicator for operation status
- Thermostatically controlled cooling fan
- Battery low alarm, battery low shutdown, over voltage, over temperature, output short, input polarity reverse, over load protections
- Built in cooling fan ON-OFF control
- Optional monitoring software
- Output AC voltage selectable by setting button
- 100 ~ 120VAC Output version available
- Worldwide AC output receptacle options available
-
More information Compare
1000W True Sine Wave DC-AC Power Inverter
TS-1000 is a high performance true sine wave DC/AC power inverter that uses high frequency circuit topology. With high efficiency up to 92% this dc/ac inverter can provide 1000W continuously and peak load of 1150W for 3 minutes, 1500W for 10 seconds or 2000W surge power for 30 utility cycles.
Features
- True sine wave output (THD<3%)
- High surge power up to 2000W
- High efficiency up to 92%
- Power ON-OFF switch
- Standby saving mode can be selected
- Front panel indicator for operation status
- Thermostatically controlled cooling fan
- Battery low alarm, battery low shutdown, over voltage, over temperature, output short, input polarity reverse, over load protections
- Built in cooling fan ON-OFF control
- Optional monitoring software
- Output AC voltage selectable by setting button
- 100 ~ 120VAC Output version available
- Worldwide AC output receptacle options available
-
More information Compare100W 14.4~33.6VDC Input Single Output DC-DC Converters for Railway Applications
RSD-100B Series are 100W 14.4~33.6VDC input dc-dc converters with EN50155 railway certificate compliance. The series are available as 5V, 12V & 24V output options, are semi-encapsulated to provide anti-moisture, anti-dust & better heat dissipation as well as anti-vibration capabilities. Standard features include short circuit, over load, over voltage & input reverse polarity protections and built-in…
Features
- 2:1 wide input range
- Protections: Short circuit/Overload/Over Voltage
- 4000VDC I/O Isolation
- Cooling by free air convection
- Built-in constant current limiting circuit
- Compliance to EN50155 (railway certification)
- 1U Low profile
- 105°C long life electrolytic capacitors
- 100% Full load burn-in test
-
More information Compare100W 19 ~ 72Vdc Input Single Output DC-DC Converters
SDS-100M Series are single output DC-DC Converters with an input voltage range of 19V to 72V making them suitable for both 24V and 48V input applications. Output voltages include 5V, 12V, 24V, 36V & 48V all of which are adjustable by ±10%. SDS-100M Series of DC-DC Converters comply to UL, cUL, TUV EN60950-1:2006 and CB…
Features
- 4:1 wide input range
- DC Input 19V ~ 72V
- Input protection: 10A/125V fuses
- Inrush current limitation soft start function
- Input & output isolation
- Input polarity reverse protection
- Over voltage, over load & short circuit protection
- Output voltage ±10% adjustment
- 100% full load burn-in test
- -20°C to 70°C operating temperature
- Meets LVD standard
-
More information Compare100W 1U Single Output Enclosed Power Supplies with PFC Function
RSP-100 Series extends the RSP range to include a lower 100W of output power, in a 1U low profile 30mm enclosure. These enclosed power supplies feature high efficiency, free air convection cooling and a 1U low profile making them ideal for end users looking for energy saving, noise free and low profile economical power supplies….
Features
- Universal full range AC input
- Built-in active PFC function
- Short circuit, over load, over voltage, over temperature protections
- Built-in constant current limiting circuitry
- Cooling by free air convection
- 1U low profile 30mm
- Remote On-Off Control
- LED indicator for power on
-
More information Compare
100W 28.8~67.2VDC Input Single Output DC-DC Converters for Railway Applications
RSD-100B Series are 100W 28.8~67.2VDC input dc-dc converters with EN50155 railway certificate compliance. The series are available as 5V, 12V & 24V output options, are semi-encapsulated to provide anti-moisture, anti-dust & better heat dissipation as well as anti-vibration capabilities. Standard features include short circuit, over load, over voltage & input reverse polarity protections and built-in…
Features
- 2:1 wide input range
- Protections: Short circuit/Overload/Over Voltage
- 4000VDC I/O Isolation
- Cooling by free air convection
- Built-in constant current limiting circuit
- Compliance to EN50155 (railway certification)
- 1U Low profile
- 105°C long life electrolytic capacitors
- 100% Full load burn-in test
-
More information Compare
100W 57.6~154VDC Input Single Output DC-DC Converters for Railway Applications
RSD-100B Series are 100W 57.6~154VDC input dc-dc converters with EN50155 railway certificate compliance. The series are available as 5V, 12V & 24V output options, are semi-encapsulated to provide anti-moisture, anti-dust & better heat dissipation as well as anti-vibration capabilities. Standard features include short circuit, over load, over voltage & input reverse polarity protections and built-in…
Features
- 2:1 wide input range
- Protections: Short circuit/Overload/Over Voltage
- 4000VDC I/O Isolation
- Cooling by free air convection
- Built-in constant current limiting circuit
- Compliance to EN50155 (railway certification)
- 1U Low profile
- 105°C long life electrolytic capacitors
- 100% Full load burn-in test
-
More information Compare
100W 9.5 ~ 36Vdc Input Single Output DC-DC Converters
SDS-100L Series are single output DC-DC Converters with an input voltage range of 9.5V to 36V making them suitable for both 12V and 24V input applications. Output voltages include 5V, 12V, 24V, 36V & 48V all of which are adjustable by ±10%. SDS-100L Series of DC-DC Converters comply to UL, cUL, TUV EN60950-1:2006 and CB…
Features
- 4:1 wide input range
- DC Input 9.5V ~ 36V
- Input protection: 15A/250V fuses
- Inrush current limitation soft start function
- Input & output isolation
- Input polarity reverse protection
- Over voltage, over load & short circuit protection
- Output voltage ±10% adjustment
- 100% full load burn-in test
- -20°C to 70°C operating temperature
- Meets LVD standard
-
More information Compare100W AC/DC Single Output Class 2 LED Lighting Power Supply
PLC-100 Series are 100W LED Lighting Power Supplies based on earlier PLN models but with a redesign to change the terminal block style of the Input/Output connections to be more flexible when wiring and the addition of two access points, with rubber stoppers, to allow the output voltage and current to be adjusted without the…
Features
- Universal AC input / Full range
- Short circuit, over load, over voltage, over temperature protections
- Built-in active PFC function
- UL1310 class 2 unit power
- Cooling by free air convection
- 100% full load burn-in test
- High reliability
- Suitable for LED lighting and moving sign applications
- Compliance to worldwide safety regulations for lighting
-
More information Compare100W AC/DC Single Output Enclosed Power Supply with UPS Function Battery Charger
PSC-100C Series is a 100W AC/DC enclosed power supply with additional charger output, designed primarily for the security industry. The product features 90-264VAC Universal AC input voltage, 13.8V and 27.6V output options and short circuit, overload and over voltage protection. PSC-100C Series has been designed with battery low protection, battery polarity protection, via fuse, and…
Features
- 90-264VAC Universal AC input
- <strong>Enclosed within L-Bracket and cover case</strong>
- Short circuit, overload, over voltage protection
- Battery low protection / Battery polarity protection by fuse
- Relay contact signal output for AC OK and Battery low
- Cooling by free air convection
