Open Frame Medical Grade Power Supplies

Showing 31–37 of 37 results

  • 5W High Density AC/DC Reliable Green Medical Encapsulated Type

    MPM-05 is a 5W high density and small sized AC/DC module type medical grade power supply series offered in pin type.

    Features

    • 1.8″x1″ compact size
    • Medical safety approved (2 x MOPP) according to ANSI/AAMI WS60601-1 and IEC/EN60601-1
    • Suitable for BF application with appropriate system consideration
    • NO load power consumption <0.075W
    • Extremely low leakage current
    • Wide operating temp range -40~+85C
    • EMI Class B for Class II configuration
    • Protections: Short circuit/ Overload/ Over voltage/ Over temperature
    • No minimum load required
    • Typical lifetime > 48K hours
    • 3 years warranty
    More information Compare
  • 5W Single Output Encapsulated Medical PSU

    Featuring class II isolation levels they can be equiped into non-patient contact medical equipment and still comply with class B as per EMI regulations. With energy saving and the environment in mind the no load power consumption is lower than 0.5W so that it complies with the requirements for “green mode” power supplies. Standard functions…

    Features

    • Universal AC input/full range
    • Ultra low profile
    • Isolation class II
    • No load power consumption <0.5W
    • Short circuit, OLP & OVP
    • UL60601-1 & TUV EN60601-1 medical safety approved
    • Cooling by free air convection
    • Fixed switching frequency at 67KHz
    More information Compare
  • 60W Single Output Open Frame Medical PSU

    Developed for medical and IT applications with the requirement of reduced profiles and complying with both medical and industrial agency standards these units can deliver their fully rated output of 50 to 60W with only free air convection and also has 10% more peak load capability than their larger rivals. Featuring only 200uA of leakage…

    Features

    • Suitable for IT and Medical applications
    • 4″x2″ miniature size
    • Universal AC input/Full range
    • Low leakage current<200uA
    • Short circuit/Over load/Over voltage protection
    • Cooling by free air convection
    • UL60601-1/IEC60601-1/EN60601-1 medical safety approved
    • UL60950-1/IEC60950-1/EN60950-1 ITE safety approved
    • No load power consumption <0.75W
    • 110% peak load capability
    • Fixed switch frequency at 100KHz
    More information Compare
  • 65W Single Output Medical Open Frame Power Supply

    Features

    • 105°C output capacitor
    • International AC input range
    • High efficiency, low working temperature
    • Soft-start circuit, Limiting AC surge current
    • Protections including short circuit, overload and over voltage
    • Compact size
    • 100% Full load burn-in test
    • Built in EMI filter, Low ripple and noise
    More information Compare
  • 75W AC-DC Miniture Single Output Medical PSU

    Complying with both medical and industrial agency standards, these units can deliver their full rated output of 75W with only free air convection and up to 100W by providing 23.5CFM forced air. Featuring only 200µA of leakage current at 264VAC, they can be equipped into non-patient contact medical equipment and still comply with Class B…

    Features

    • Universal AC input
    • Low leakage current<200uA
    • Short circuit, over load, over voltage protections
    • Free air convection for rated power and 23.5CFM forced air convection for peak load
    • UL60601-1, IEC60601-1, EN60601-1 medical safety approved
    • No load power consumption <0.75W
    • Fixed switching frequency at 65KHz
    More information Compare
  • RPS-30 Series 30W Reliable Green Medical Power Supply

    The RPS-30 Series is a30W medical grade reliant PCB power supply with a high power density. With a 80 ~ 264VAC input the RPS-30 offers various output Voltages between 3.3V and 48V

    Features

    • 3″ x 2″ miniature size
    • Universal AC input / Full range
    • Class II (without FG) installations
    • Medical safety approved (2 x MOPP between primary to secondary)
    • Suitable for BF application with appropriate system consideration
    • Low Leakage current <100μA
    • No load power consumption <0.1W
    • High Efficiency up to 91%
    • For 1U applications
    • Protections: Short circuit / Overload / Over voltage
    • Cooling by free air convection
    • -30 ~ +70°C working temperature range
    • LED indicator for power on
    • Operating altitude up to 4000 meters
    • 3 years warranty

    More information Compare
  • RPS-65 Series 65W Reliable Green Medical Power Supply

    The RPS-65 Series is a 65W medical grade reliant PCB power supply with a high power density. With a 80 ~ 264VAC input the RPS-65 offers various output Voltages between 3.3V and 48V

    Features

    • 3″X2″ Compact Side
    • Medical Safety approved (2 X MOPP) according to ANSI/AAMI ES60601-1 and IEC?EN6060-1
    • Suitable for BF application and appropriate system consideration
    • Cooling by free air convection
    • EMI class B for class II configuration
    • No load power consumption <0.1W
    • Extremely low leakage current
    • Protections: Short circuit / Overload / Over Voltage
    • Operating altitude up to 4000 meters
    • 3 years warranty
    More information Compare

Open Frame Medical Grade Power Supplies