Medical Grade Power Supplies

Showing 31–45 of 70 results

  • 200W AC-DC PCB type Switching Power Supplies

    The Mozp-200 series are a medically approved (MOOP) PCB type power supply, suitable for non patient contact medical equipment. Offering an extremely high efficiency solution with low noise and leakage current.

    Features

    • Medically approved to IEC60601 3rd (ANSI/AAMI ES60601-1) - Means of Operator Protection
    • High efficiency
    • Synchronous rectifying topology
    • Low leakage current and low-noise
    • High peak power
    • Suitable for parallel operation
    More information Compare
  • 200W Dual Output Medical Open Frame Power Supply

    MPD-200 Series are 200W PCB type switching power supplies with active PFC function. Complying with both medical and industrial agency standards these units can deliver their full rated output of 200W with 25CFM forced are or 140W with convection fooling for wither medical or industrial applications. Featuring only 180uA of leakage current at 264VAC, they…

    Features

    • Universal AC input / Full range
    • Built-in active PFC, PF>0.95@230VAC
    • Low leakage current <180µA
    • Free air convection for 140W and forced air convection for 200W
    • Power good and fail signal output
    • Built-in remote ON-OFF control & remote sense function
    • Fixed switching frequency at 100KHz
    • Compliance to UL2601-1 & TUV EN60601-1 medical standards
    More information Compare
  • 200W Quad Output Medical Open Frame Power Supply

    MPQ-200 Series are 200W PCB type switching power supplies with active PFC function. Complying with both medical and industrial agency standards these units can deliver their full rated output of 200W with 25CFM forced are or 140W with convection fooling for wither medical or industrial applications. Featuring only 180uA of leakage current at 264VAC, they…

    Features

    • Universal AC input / Full range
    • Built-in active PFC, PF>0.95@230VAC
    • Low leakage current <180µA
    • Free air convection for 140W and forced air convection for 200W
    • Power good and fail signal output
    • Built-in remote ON-OFF control & remote sense function
    • Fixed switching frequency at 100KHz
    • Compliance to UL2601-1 & TUV EN60601-1 medical standards
    More information Compare
  • 200W Single Output Medical Open Frame Power Supply

    MPS-200 Series are 200W PCB type switching power supplies with active PFC function. Complying with both medical and industrial agency standards these units can deliver their full rated output of 200W with 25CFM forced are or 140W with convection cooling for either medical or industrial applications. Featuring only 180uA of leakage current at 264VAC, they…

    Features

    • Universal AC input / Full range
    • Built-in active PFC, PF>0.95@230VAC
    • Low leakage current <180µA
    • Free air convection for 140W and forced air convection for 200W
    • Power good and fail signal output
    • Built-in remote ON-OFF control & remote sense function
    • Fixed switching frequency at 100KHz
    • Compliance to UL2601-1 & TUV EN60601-1 medical standards
    More information Compare
  • 200W Single Output Medical Type Enclosed Power Supply

    The MSP-200 series is a medical grade enclosed power supply, offering a low leakage current, high efficiency, low no load power consumption and 1U low profile. Complying with international medical safety regulations to fulfill the high quality demands of medical applications.

    Features

    • Universal AC input/Full range
    • Built-in active PFC function, PF>0.95
    • High efficiency up to 89%
    • Withstand 300VAC surge input for 5 seconds
    • Protections: Short circuit/Overload/Over voltage/Over temperature
    • Cooling by free air convection
    • Built-in constant current limiting circuit
    • 1U low profile 38mm
    • Built-in remote ON-OFF control
    • Standby 5V@0.3A
    • Built-in remote sense function
    • No load power consumption <0.5W
    More information Compare
  • 200W Triple Output Medical Open Frame Power Supply

    MPT-200 Series are 200W PCB type switching power supplies with active PFC function. Complying with both medical and industrial agency standards these units can deliver their full rated output of 200W with 25CFM forced air or 140W with convection fooling for either medical or industrial applications. Featuring only 180uA of leakage current at 264VAC, they…

    Features

    • Universal AC input / Full range
    • Built-in active PFC, PF>0.95@230VAC
    • Low leakage current <180µA
    • Free air convection for 140W and forced air convection for 200W
    • Power good and fail signal output
    • Built-in remote ON-OFF control & remote sense function
    • Fixed switching frequency at 100KHz
    • Compliance to UL2601-1 & TUV EN60601-1 medical standards
    More information Compare
  • 20W Single Output Encapsulated Medical PSU

    The PM series has been developed to extend our medical product line to include 5 to 20W applications. Featuring a low leakage current of 200uA at 264VAC this unit can be equiped into non-patient contact medical equipment and still comply with class B as per EMI regulations. With energy saving and the environment in mind…

    Features

    • Universal AC input / full range
    • Protections: Short circuit / Overload / Over voltage
    • Low leakage current <300µA
    • Cooling by free air convection
    • Medical Safety approved (2 x MOPP between primary to secondary)
    • Ultra miniature size, light weight
    • No load power consumption <0.75W
    • 100% full load burn-in test
    • Fixed switching frequency at 90KHZ
    • High reliability
    • Suitable for BF application with appropiate system consideration
    • 3 years warranty
    More information Compare
  • 20W Single Output On-board Type Medical PSU

    Featuring a low leakage current of 200uA at 264VAC this unit can be equiped into non-patient contact medical equipment and still comply with class B as per EMI regulations. With energy saving and the environment in mind the no load power consumption is lower than 0.75W so that it complies with the requirements for “green…

    Features

    • Universal AC input/full range
    • Ultra low profile
    • Low leakage current <200uA
    • No load power consumption <0.75W
    • Short circuit, OLP, OVP & OTP
    • Fixed switching frequency at 90KHz
    • UL60601-1, IEC60601-1 & TUV EN60601-1 medical safety approved
    • Cooling by free air convection
    More information Compare
  • 24~50W AC-DC Medical Desktop Power Supply

    Features

    • Universal AC input, full range
    • 3 pole AC inlet IEC320-C14
    • Class I power (with earth pin)
    • Full output 3~48V safety approval
    • Short circuit, over load, over voltage and over temperature protections
    • Fix switching frequency & regulation
    • LED indicator for power on
    • Fully enclosed plastic case
    • Topology: Top switch circuit
    More information Compare
  • 24~50W AC-DC Medical Desktop Power Supply

    Features

    • Universal AC input, full range
    • 3 pole AC inlet IEC320-C14
    • Class I power (with earth pin)
    • Full output 3~48V safety approval
    • Short circuit, over load, over voltage and over temperature protections
    • Fix switching frequency & regulation
    • LED indicator for power on
    • Fully enclosed plastic case
    • Topology: Top switch circuit
    More information Compare
  • 25W AC-DC Single Output Medical Desktop Power Supplies

    A range of high reliability 25W green medical desktop power supplies GSM25B Series have a 2 pin IEC320-C8 power inlet and 80-364Vac input range. GSM25B Series output voltages range from 5Vdc to 48Vdc to suit the requirements of various small medical devices. The design meets with EISA 2007, international medical standards (2 x MOPP) and…

    Features

    • Universal 80-264Vac input voltage
    • Class II power
    • 2 pole AC inlet IEC320-C8
    • No load power consumption <0.1W
    • Low leakage current <50µA
    • High efficiency up to 88%
    • 2 x MOPP Medical safety approved
    • Short circuit, over load, over voltage protections
    • ErP step 2 compliant (level V)
    • Meet EISA 2007 (Energy Independence and Security Act)
    More information Compare
  • 300W Single Output AC/DC Medical Type Power Supply

    The MSP-300 Series is a 300W AC/DC medical enclosed power supply; complying to medical safety regulations and characterized by its low leakage current making the series suitable for “non patient contact” equipment. With up-to-date high frequency switching technology it posesses up to 89% of high effiency allowing the power supply to be cooled by the…

    Features

    • Universal AC input/Full range
    • Built-in active PFC function, PF>0.95
    • High efficiency up to 89%
    • Withstand 300VAC surge input for 5 seconds
    • Protections: Short circuit/Overload/Over voltage/Over temperature
    • Built-in constant current limiting circuit
    • 1U low profile 41mm
    • Built-in cooling fan ON-OFF control
    • Built-in DC OK signal
    • Built-in remote ON-OFF control
    • Standby 5V@0.3A
    • Built-in remote sense function
    • No load power condumption <0.5W
    More information Compare
  • 300W Single Output Medical Type Power Supply

    The RPS-300 Series are a 300W Single output medical type open frame power supply. With standard functions including built-in 12V/0.5A auxiliary output, power good and fail signal output, built-in remote sense function and built-in active PFC function. The RPS-300 has protections including short circuit, overload, over voltage and over temperature. Designed to comply with international…

    Features

    • Universal AC input/Full range
    • Built-in active PFC function
    • Withstand 300VAC surge input for 5 seconds
    • Protections: Short circuit/Overload/Over voltage/Over temperature
    • Built-in 12V/0.5A auxiliary output
    • 5″ x 3″ compact size
    • Free air convection for 200W and 300W with 20.5CFM forced air
    • With power good and fail signal output
    • Built-in remote sense function
    • No load power consumption under 0.5W by PS-ON control
    • Standby 5V@1A with fan @ 0.6A without fan
    More information Compare
  • 30W AC/DC High Reliable Green Medical Encapsulated Type

    MPM-30 is a 30W high density and small sized AC/DC module type medical grade power supply series offered in pin type.

    Features

    • 2.73″X1.53 compact size
    • Medical safety approved (2 x MOPP) according to ANSI/AAMI WS60601-1 and IEC/EN60601-1
    • Suitable for BF application with appropriate system consideration
    • No load power consumption <0.075W
    • Extremely low leakage current
    • Wide operating temp range -40~+85C
    • EMI Class B for Class II configuration
    • Protections: Short circuit/ Overload/ Over voltage/ Over temperature
    • No minimum load required
    • Typical lifetime > 48K hours
    • 3 years warranty
    More information Compare
  • 30W Single Output Medical Open Frame Power Supply

    Features

    • Meets medical safety IEC601-1
    • Less then 75 A leakage current
    • Compact size, low profile
    • Short circuit/ over voltage/ temperature overload protection
    • High efficiency
    More information Compare

Sunpower’s selection of medical power supply units are versatile products, capable of handling a large range of non-patient/patient connect applications, IT equipment and general electronic use within a medical environment.

This premium range of medical power supply units are available as openframe PCB, enclosed, PCB mount/on board and plugtop/desktop options with a range that starts at 1W and continues through to 600W. They’re also specifically designed with low leakage current and low no load power consumption, protections against short circuit, over voltage and over load issues as standard. Presenting a secure, efficient and safe product at all times.

In addition, all of Sunpower’s medical power supply units come complete with medical industry safety standards and are built to be robust and reliable. Providing a product that is built-to-last and perform at a premium level.

To help you with any specific Medical Power Supply requirements or questions Sunpower’s friendly and expert team will be happy to talk to you to discuss your options. Feel free to call us on 0118 9823746 for further information.