230W Single Output Battery Charger

Print

Email

Additional information

Manufacturer

Mean Well Enterprises Ltd.

Standards

CE, PFC, TRIGS, ULR

Type

AC/DC

Outputs

Single

Ah

160Ah Maximum

Battery type

Lead Acid

  • 3 Stage charging characteristic
  • Universal AC input
  • Built-in active PFC Function
  • Short Circuit, Over Load, Over Voltage Protections
  • Built-in cooling fan ON-OFF control
  • Built-in remote ON-OFF control
  • 2 colour LED loading indicator
  • Low cost, high reliability
Input Voltage90 ~ 264Vac
Input Frequency47 ~ 63Hz
Power FactorPF>0.95/230vAC pfc>0.98/115Vac at full load
AC Current3A/115Vac 1.5A/230Vac
Inrush Current50A, cold start
Leakage Current<3.5mA/240Vac
Battery TypeOpen & Sealed Lead Acid
Over Load Protection90 ~ 110% rated output current
Constant current limiting, recovers automatically after fault condition is removed
Over Voltage ProtectionShut down o/p voltage, re-power on to recover
Over TemperatureAutomatically derate charge current until zero
Remote Control (CN105)Open: Normal operation Short: Stop charging
Fan ControlRTH3>50°C Fan ON, <45°C Fan OFF (Typ.)
Temperature RiseBy NTC
Working Temperature-20°C ~ +50°C (Refer to output load derating curve)
Working Humidity20 ~ 90% RH non-condensing
Storage Temperature, Humidity-40°C ~ +85°C, 10 ~ 95% RH
Temperature Coefficient±0.03%/°C (0 ~ 50°C)
Vibration10~500Hz, 2G 10min./1 cycle, 60min. each along X, Y, Z axes
Safety StandardsUL1012 (for PB-230-xxAD1 only), TUV EN60950-1 approved
Withstand VoltageI/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
Isolation ResistanceI/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25°C / 70% RH
EMCCompliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3; ENV50204
EN61000-4-2,3,4,5,6,8,11; EN55024, light industry level, criteria A
MTBF244.5Khrs min. MIL-HDBK-217F (25°C)
PlugStandard = 4 pin power din AD1=Anderson Connector
DC Cable115cm ±5cm
  • CE
  • PFC
  • TRIGS
  • ULR