• 1U low profile/19-inch rack mounting
  • Control and monitor up to 32 RCP-2000 units
  • Front panel LCD and buttons for on-site service without PC
  • USB, RS-232 or ethernet interface for PC connection locally or remote monitoring and control via GSM modem
  • Alarm/event log with time and date
  • Windows-based PC communication software
  • Easy wire connections on rear side
  • 4 user programmable relay outputs for traditional remote monitoring warning
RCP-CMU-1 is a fully digitalized control/monitoring unit for the RCP-2000 power system that up to 32 RCP-2000 units can be handled by one RCP-CMU-1. Equipped with USB, RS-232 and ethernet interface, it can be connected locally to PC or remotely via GSM modem to execute the control and monitoring tasks. With built in 4 configurable relay contacts, users can flexibly monitor specific events or alarms and react with the suitable action accordingly.

Additional information

Manufacturer MEAN WELL
Standards CB, CE, CSUUS, TUV
Digital MeterDisplay the DC output vol, current and temp.
LED IndicatorGreen: Power on Red:Alarm
Relay Contact4 user programmable relay
Voltage Range10~60VDC
Input Current0.5A/24VDC 0.25/48VDC
Working Temperature-25~+70°C
Working Humidity20~90% RH non-condensing
Storage Temp. Humidity-40~+85°C, 10~95% RH
Vibration10~500Hz, 2G 10min./1 cycle, 60 min. each along X, Y, Z axes
Safety StandardsUL60950-1; TUV EN60950-1 Approved
EMCCompliance to EN55022; EN61000-4-2,3,4,6,8