200W Dual Output Medical Open Frame Power Supply

  • Universal AC input / Full range
  • Built-in active PFC, PF>0.95@230VAC
  • Low leakage current <180µA
  • Free air convection for 140W and forced air convection for 200W
  • Power good and fail signal output
  • Built-in remote ON-OFF control & remote sense function
  • Fixed switching frequency at 100KHz
  • Compliance to UL2601-1 & TUV EN60601-1 medical standards
MPD-200 Series are 200W PCB type switching power supplies with active PFC function. Complying with both medical and industrial agency standards these units can deliver their full rated output of 200W with 25CFM forced are or 140W with convection fooling for wither medical or industrial applications. Featuring only 180uA of leakage current at 264VAC, they can be equipped into non-patient contact medical equipment and still comply with Class B EMI regulations. Standard function sinclude short circuit, over load, over voltage and over temperature protections, PG/PF signal output, remote sense and remote ON/OFF control that covers most of the demands for typicall usages. Since the height is only 35.5mm the MPD-200 series are also suitable for 1U applications or other height constraint applications.

Additional information

Manufacturer MEAN WELL
Outputs Dual
Standards CSUUS
Type AC/DC
Range Power
  • Non-patient contact medical
  • 1U
  • General electronics
  • Low Profile IT

Products in this Range

Part number Power (watts) Voltage (max/rated) Current (amps) R&N (mV) Efficiency (%)
MPD-200A 200W 12V 20A 120mV 82% Request Quote
MPD-200B 200W 24V 20A 180mV 83% Request Quote