Features
  • Universal AC input / Full range
  • Built-in active PFC, PF>0.95@230VAC
  • Low leakage current <180µA
  • Free air convection for 140W and forced air convection for 200W
  • Power good and fail signal output
  • Built-in remote ON-OFF control & remote sense function
  • Fixed switching frequency at 100KHz
  • Compliance to UL2601-1 & TUV EN60601-1 medical standards

MPQ-200 Series are 200W PCB type switching power supplies with active PFC function. Complying with both medical and industrial agency standards these units can deliver their full rated output of 200W with 25CFM forced are or 140W with convection fooling for wither medical or industrial applications. Featuring only 180uA of leakage current at 264VAC, they can be equipped into non-patient contact medical equipment and still comply with Class B EMI regulations. Standard function sinclude short circuit, over load, over voltage and over temperature protections, PG/PF signal output, remote sense and remote ON/OFF control that covers most of the demands for typicall usages. Since the height is only 35.5mm the MPQ-200 series are also suitable for 1U applications or other height constraint applications.

Additional information

Manufacturer
Standards
Type
Outputs
Current (amps) 15A, 5A, 2A, 3A, 7A
Efficiency (%) 78%, 79%, 81%
Power (watts) 200W
R&N (mV) 150mV, 120mV, 180mV, 80mV
Voltage (max/rated) 12V, 15V, 24V, 5V
  • Non-patient contact medical
  • 1U
  • General electronics
  • Low Profile IT