Features
  • 2:1 input range, input and output isolation
  • Input under voltage protection
  • Input polarity reverse protection
  • Soft start function, low inrush current
  • Over load, over voltage, short circuit protection
  • Output voltage ±10% adjustment
  • No minimum load requirement
  • 100% 50°C burn-in test
  • Meets UL, cUL, TUV standards

Additional information

Manufacturer
Standards CE
Type DC/DC
Outputs Single
Input Voltage9.5Vdc ~ 18Vdc (Typically 12V)
Input Current<10A@9.5Vdc
Input ProtectionCeramic fuse 15A/125V
Over Voltage ProtectionUnit will shutdown if an over voltage conditions occurs. Auto recovery once fault is removed
Over Load Protection105% ~ 180% of rated output. Auto recovery
Short Circuit ProtectionUnit will shutdown if a short circuit conditions occurs. Auto recovery once fault is removed
Rise Time<20ms
CoolingNatural cooling
Operation Temperature0°C to +70°C, derating: 50°C~70°C: 2.5%/°C
Storage Temperature-10°C to +75°C
Operation Humidity20% to 85% RH non condensing
Storage Humidity10%~95% non condensing
MTBF417K hours
SafetyUL60950-1, CSA C22.2 No 60950-1, TUV EN 60 950-1, IEC 60950-1, EMKO-TSE (74-SEC)207/94
EMCEN 55022 CLASS B、FCC CFR 47 PART 15 CLASS B、CNS 13438 CLASS B.
CNS 13438 CLASS B; EN 55024:EN 61000-4-2,3,4,5,6,8.
Part NoVoltageMax LoadRegulationRipple NoiseEff.Max PowerOVP
SDS-060A3-33.3V15A±3%50mV62%50W3.8 ~ 4.6V
SDS-060A055V12A±2% 50mV64%60W5.8 ~ 7.0V
SDS-060A1212V5A±1%100mV66%60W13.8 ~ 17.5V
SDS-060A2424V2.5A±1%150mV68%60W27.6 ~ 33.6V
SDS-060A4848V1.3A±1%240mV70%60W55.2 ~ 67.2V