Features
- Universal AC input
- Short circuit, over load, over voltage protections
- Battery low protections/Battery polarity protection by fuse
- Alarm signal for AC OK and Bat. low
- Cooling by free air convection
- UL, CUL, TUV, CE and CB Approvals
PSC-60 Series is a miniature 4″ x 2″ PCB switching power supply for the security industry. To accompany the main output there is an additional charger output, with smaller power rating, to fulfill the special requirements of security, monitoring, or battery backup related applications. The high performance switcher design technology applied to this power supply allows for the small 4″ x 2″ profile to provide high efficiencys of 74% and high working temperatures of 70C ambient, using only free air convection. PSC-60 has full TTL alarm signals, short circuit, overload, and over voltage protection on the output side and battery polarity protection (by fuse) and battery low cut-off for the battery side. The inot also has global safety certificates per UL, CUL, TUV, CE, and CB.
Additional information
Manufacturer | MEAN WELL |
---|---|
Standards | |
Outputs | Single |
IP rating |
- Security systems
- Emergency lighting systems
- UPS systems
- Central monitoring systems
- Automatic door systems
Input Voltage Range | 90 ~ 264Vac 127 ~ 370Vdc |
Input Frequency | 47 ~ 63Hz |
Efficiency (Typ.) | 84% |
Input Current | 1.6A/115Vac 1A/230Vac |
Inrush Current | 30A/115Vac 60A/230Vac, Cold start |
Leakage Current | <1mA/ 240Vac |
Output Voltage Tolerance | ±1.0% |
Line Regulation | ±0.5% |
Load Regulation | ±0.5% |
Set Up, Rise Time | 800ms, 50ms/230Vac 1600ms, 50ms/115Vac at full load |
Hold Up Time | 50ms/230Vac 10ms/115Vac at full load |
Over Load Protection | 105 ~ 150%rated output power |
Hiccup mode, recovers automatically after fault condition is removed | |
Over Voltage Protection | Hiccup mode, recovers automatically after fault condition is removed |
AC OK Function | TTL open collector output, ON : AC OK ; OFF : AC Fail ; Ice : max. 30mA@ 50Vdc |
Battery Low Function | TTL open collector output, ON : Battery Low ; OFF : Battery OK ; Ice : max. 30mA@ 50Vdc |
Working Temperature | -20°C ~ +70°C (Refer to output load derating curve) |
Working Humidity | 20 ~ 90% RH non-condensing |
Storage Temperature, Humidity | -20°C ~ +85°C, 10 ~ 95% RH |
Temperature Coefficient | ±0.03%/°C (0~50°C) on main output |
Vibration | 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes |
Safety Standards | UL60950-1, TUV EN60950-1 approved |
Withstand Voltage | I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC |
Isolation Resistance | I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC/ 25°C/ 70% RH |
EMC | Compliance to EN55022 (CISPR22) Class B; EN61000-3-2,-3; ENV50204 |
EN61000-4-2,3,4,5,6,8,11;EN55024, light industry level, criteria A | |
MTBF | 589.7K hrs min. MIL-HDBK-217F (25°C) |
Part No | Voltage | Rated Current | Current Range | Rated Pwr | R&N | Volt. Adj. | OVP | Battery Cut Off | Battery Low |
---|---|---|---|---|---|---|---|---|---|
PSC-60A | 13.8V | 2.8A | 0 ~ 4.3A | 59.34W | 120mV | 12 ~ 15V | 14.49 ~ 18.63V | 10.5±0.5V | Battery low voltage < 11V |
13.8V | 1.5A | ||||||||
PSC-60B | 27.6V | 1.4A | 0 ~ 2.15A | 59.34W | 240mV | 24 ~ 29V | 28.98 ~ 37.26V | 21±1V | Battery low voltage < 22V |
27.6V | 0.75A |