| Input Voltage |
85 ~ 264Vac 120 ~ 370Vdc |
| Input Frequency |
47 ~ 63Hz |
| Power Factor |
PF>0.95/230VAC PF>0.98/115VAC at full load |
| Input Current |
6A/115Vac 3A/230Vac |
| Inrush Current |
45A, cold start |
| Leakage Current |
<2mA/ 240Vac |
| Set Up, Rise Time |
800mS, 50mS at full load |
| Hold Time |
36mS at full load |
| Over Load Protection |
105 ~ 135%r ated output power |
|
Hiccup mode, recovers automatically after fault condition is removed |
| Over Voltage Protection |
Shut down o/p voltage, re-power on to recover |
| Over Temperature Protection |
80°C ±5°C (TSW1) Detect on heatsink of Q1,Q2 power transistor) |
|
Shut down o/p voltage, recovers automatically after temperature goes down |
| Power Good/Power Fail (Optional) |
10mS/1mS |
| Remote Control |
RC+/RC-:0 ~ 8V Power On; 4V ~ 10V Power Off |
| Working Temperature |
-10°C to +60°C (Refer to output load derating curve) |
| Working Humidity |
20 ~ 90% RH non-condensing |
| Storage Temperature, Humidity |
-20°C to +85°C, 10 ~ 95% RH |
| Temperature Coefficient |
±0.03%/°C (0~50°C) |
| Vibration |
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X,Y, Z axes |
| Withstand Voltage |
I/P-O/P:3KVac I/P-FG:1.5KVac O/P-FG:0.5KVac |
| Isolation Resistance |
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500Vdc |
| Safety Standards |
UL60950-1, TUV EN60950-1 Approved |
| EMC |
Compliance to EN55022 (CISPR22) Class B; EN61000-3-2,-3 |
|
EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, Light industry level, criteria A |
| MTBF |
75.9K hrs min. MIL-HDBK-217F (25°C) |
.jpg)
