Rack & PC

Showing 1–15 of 113 results

  • 1000W Front End Power System

    1U low profile 19″ rack mount power solution consisting of 1 to 3 hot-swappable RCP-1000 units that, up to 3000W, can be provided in a single rack. Featuring active PFC and 10.67W/in2 extremely high power density. With the ability to provide rated output wattage even at 100VAC input, due to its high efficiency design, and…

    Features

    • Universal AC input
    • Built-in 5V/0.3A auxiliary power
    • Built-in active PFC function, PF>0.96
    • Short circuit, over load, over voltage & over temperature protections
    • Forced air cooling by built-in DC fan with fan speed control
    • Low profile:1U height
    • Active current sharing up to 3000W (3 units)in 19" rack
    • Remote control for single unit
    • Built-in remote sense function
    • Output voltage trimming function
    • Hot-swap operation
    • Optional I C serial data bus
    • AC OK & DC OK signal
    • Internal ORing diode
    • Option of AC Inlet or Terminal block on Rack
    More information Compare
  • 1600W 1U Rack Mountable AC/DC Power Supplies

    RCP-1600 series is a range of 1.6W 1U rack mountable AC/DC power supplies with high power density up to 25W/inch³ and high performance efficiency up to 93%; available in 12V, 24V or 48V single output models. This series operates for 90~264Vac input voltage and incorporates forced air cooling via the built-in DC fan with fan…

    Features

    • Universal AC input (withstand 300Vac surge input for 5 seconds)
    • Built-in active PFC function
    • High efficiency up to 93%
    • Forced air cooling via built-in DC fan
    • Programmable output voltage and constant current levels
    • Built-in OR-ing FET to support hot swap
    • Active current sharing up to 8000W for one 19" rack
    • Built-in I²C interface, PMBus protocol
    • Short circuit, over load, over voltage, over temperature protections
    • Conformal coating available
    • 5 years warranty
    More information Compare
  • 160W PS2 DC-DC AT Power Supply

    Features

    • 2 : 1input range
    • Input and output isolation
    • Soft start function , low inrush current
    • Input over voltage and under voltage protection
    • Input polarity reverse protection
    • Over load, over voltage, short circuit protection
    • High current for main output
    • Built-in long life ball bearing fan
    • 100% 50°C burn-in test
    More information Compare
  • 160W PS2 DC-DC ATX Power Supply

    Features

    • DC input 12V (9.5V ~ 16V)
    • Input and output isolation
    • Soft start function, low inrush current
    • Input under and over voltage protection
    • Over load, over voltage & short circuit protection
    • Power good signal / PS-ON signal
    • +3.3V & +5V output remote sensing
    • Built-in long life ball bearing fan
    • 100% 50°C burn-in test
    • Meet Intel ATX 2.01 / ATX2.03
    • UL, cUL, TUV, CB, CE standard
    More information Compare
  • 170W 1U Industrial DC-DC ATX Power Supply

    Features

    • Input and output isolation
    • Soft start function, low inrush current
    • Over voltage protection
    • Over load & short circuit protection
    • Built-in long life ball bearing FAN
    • 100% full load burn-in test
    • Meets Intel ATX 2.01 / ATX2.03 / ATX 12V / EPS
    • Meets LVD standard
    • CB, CE approved
    More information Compare
  • 180W Fanless ATX Power Supply

    A compact fanless ATX power supply designed with high durability for heavy duty use. Providing 90W continuous power and 180W peak this unit also has a minimised inrush current due to no electrolytic capacitors being used on the primary side. Easily customised by using modular output circuit configuration also with option for non stop power…

    Features

    • No minimum load requirements
    • Reduced leakage current
    • Over temperature, over current, over voltage protection
    • Optional nonstop power capability
    • Customisable outputs
    • Double sided through hole PCB for industrial use
    • Semi regulated +24V output available
    More information Compare
  • 180W Fanless ATX Power Supply

    A compact fanless ATX power supply designed with high durability for heavy duty use. Providing 90W continuous power and 180W peak this unit also has a minimised inrush current due to no electrolytic capacitors being used on the primary side. Easily customised by using modular output circuit configuration also with option for non stop power…

    Features

    • No minimum load requirements
    • Reduced leakage current
    • Over temperature, over current, over voltage protection
    • Optional nonstop power capability
    • Customisable outputs
    • Double sided through hole PCB for industrial use
    • Semi regulated +24V output available
    More information Compare
  • 19 inch Rack Power Control and Monitor System

    Features

    • 1U low profile
    • 19-inch rack mounting
    • Control and monitor up to 3 RCP-1000 units
    • Suitable for all kinds of RCP output (12V,24V,48V)
    • Digital meters for output voltage, output current, and internal temperature on front panel
    • Potential meter for adjusting output voltage of RCP-1000 unit on front panel
    • Relay contacts and LED indicators for AC fail, DC fail, and over temperature warning
    • Removable fixing accessory
    • 3 years warranty
    More information Compare
  • 1U Rack Control and Monitoring Unit

    RCP-CMU-1 is a fully digitalized control/monitoring unit for the RCP-2000 power system that up to 32 RCP-2000 units can be handled by one RCP-CMU-1. Equipped with USB, RS-232 and ethernet interface, it can be connected locally to PC or remotely via GSM modem to execute the control and monitoring tasks. With built in 4 configurable…

    Features

    • 1U low profile/19-inch rack mounting
    • Control and monitor up to 32 RCP-2000 units
    • Front panel LCD and buttons for on-site service without PC
    • USB, RS-232 or ethernet interface for PC connection locally or remote monitoring and control via GSM modem
    • Alarm/event log with time and date
    • Windows-based PC communication software
    • Easy wire connections on rear side
    • 4 user programmable relay outputs for traditional remote monitoring warning
    More information Compare
  • 2000~6000W Front End Power System

    RCP-2000 rack power system is an advanced 19″ rack-mounted system containing up to 3 hot-swappable RCP-2000 rectifiers and can deliver up to 6000W in the single rack. Up to 3 racks can be stacked to provide expanded total system capability up to 18,000W that are especially suitable for the application of servers, information technology equipment,…

    Features

    • Universal AC input / Full range
    • Holds up to 3 power modules
    • Active current sharing up to 6000W(3 unit) in one 19frack, 3 rack max.can be operated in parallel (up to 9 units)
    • PMBus serial interface
    • EC320-C20 or terminal block input
    • Front-end & rectifier applications
    • Stackable for system expansion
    • Low profile: 1U height, 19″ Rack mount
    • Hot swappable modules
    • Output voltage trimming function
    More information Compare
  • 2000W Front End Power Supply

    The RCP-2000 series are a state of the art AC/DC front end rectifiers with 1U compact size and 21.4W/in3 of high power density. They can provide up to 2000W per unit for the applications of servers,information technology equipment, networking, telecommunications, and wide range of industrial applications using distributed power architecture. Equipped with hot-swap function and…

    Features

    • Universal AC input/Full range
    • Built in 5V/0.3A, 12V/0.8A auxillary power
    • Built in active PFC function, PF>0.98
    • High efficiency up to 92%
    • Withstand 300VAC surge input for 5 seconds
    • Protections: Short circuit/ Overload/ Over voltage/ Over temperature
    • High power density 21.4W/inch3
    • Forced air cooling by built in DC fan with fan speed control
    • Low profile: 1U height
    • Remote control for single unit
    • Built in remote sense function
    • Output voltage trimming function
    • Hot-swap operation
    • PMBus serial communication
    • AC OK, DC OK signal, fan fail, OTP alarm signal
    • Internal OR-ing FET
    More information Compare
  • 200W 1U Active PFC ATX Power Supply

    Features

    • Universal full range AC input with active PFC, P.F.> 0.95
    • +3.3V, +5V main output remote sensing
    • Remote control power ON/OFF
    • Over load, over voltage & short circuit protection
    • Built in EMI filter, low ripple noise
    • Built-in long life ball bearing fan
    • 100% 50°C burn-in test
    • Meet Intel ATX 2.01 / ATX2.03 / ATX 12V / EPS
    • UL, cUL, TUV, ,CB, CE certified
    • <strong>Please note these units are fitted with power on LED above the on/off switch</strong>
    More information Compare
  • 200W 1U Active PFC ATX Power Supply

    Features

    • AC input 115V / 230V Auto sensing
    • Remote control power ON/OFF
    • Over load, over voltage & short circuit protection
    • Built in EMI filter, low ripple noise
    • Built-in long life ball bearing fan
    • 100% 50°C burn-in test
    • Meet Intel ATX 2.01 / ATX2.03 / ATX 12V / EPS
    • UL, cUL, TUV, ,CB, CE certified
    • <strong>Please note these units are fitted with power on LED above the on/off switch</strong>
    More information Compare
  • 200W ATX 12V Five Output Power Supply

    The SPX-52xx-GP1 series is a highly efficient and reliable power supply with full range universal AC input with active PFC. A built-in long life ball bearing fan for cooling allows an operating temperature of -10~+70°C.

    Features

    • Universal Full range AC input with active PFC, P.F.>0.95
    • High efficiency and reliability
    • Built-in long life ball bearing fan
    • 3.3V, 5V output remote sending
    • Over voltage, over load & short circuit, over current, over temperature protection
    • With power good signal & PS-ON signal output
    • Meet intel ATX 2.01/ATX2.31/ATX 12V/EPS
    More information Compare
  • 200W ATX 12V Six Output Power Supply

    The SPX-62xx-GP1 series is a highly efficient and reliable power supply with full range universal AC input with active PFC. A built-in long life ball bearing fan for cooling allows an operating temperature of -10~+70°C.

    Features

    • Universal Full range AC input with active PFC, P.F.>0.95
    • High efficiency and reliability
    • Built-in long life ball bearing fan
    • 3.3V, 5V output remote sending
    • Over voltage, over load & short circuit, over current, over temperature protection
    • With power good signal & PS-ON signal output
    • Meet intel ATX 2.01/ATX2.31/ATX 12V/EPS
    More information Compare

Rack & PC Power Supplies