Enclosed Medical Grade Power Supplies

Showing all 14 results

  • 05W Single Output Encapsulated Medical PSU

    Featuring class II isolation levels they can be equiped into non-patient contact medical equipment and still comply with class B as per EMI regulations. With energy saving and the environment in mind the no load power consumption is lower than 0.5W so that it complies with the requirements for “green mode” power supplies. Standard functions…

    Features

    • Universal AC input/full range
    • Ultra low profile
    • Isolation class II
    • No load power consumption <0.5W
    • Short circuit, OLP & OVP
    • UL60601-1 & TUV EN60601-1 medical safety approved
    • Cooling by free air convection
    • Fixed switching frequency at 67KHz
    More information Compare
  • 100W Single Output Enclosed Medical Type Power Supply

    The MSP-100 series is a 100W AC-DC highly efficient medical enclosed power supply. Standard features include low leakage current, extremely low no load power consumption, 1U low profile and built in active PFC function. Complying with international safety regulations the power supply is suitable for applications including chemical and biological detection equipment, analysis facilities and…

    Features

    • Universal AC input/Full range
    • Built-in active PFC function
    • High efficiency up to 90%
    • Withstand 300VAC surge input for 5 seconds
    • Protections: Short circuit/Overload/Over voltage
    • protections: Over temperature (Optional)
    • Cooling by free air convection
    • 1U low profile 38mm
    • Medical safety approved (MOOP level)
    • Built-in remote ON-OFF control
    • No load power consumption <0.5W
    More information Compare
  • 10W AC/DC High Reliable Green Medical Encapsulated Type

    MPM-10 is a10W high density and small sizer (45.7×25.4×21.5mm) AC/DC module type medical grade power supply series offered in pin type.

    Features

    • 1.8″x1″ compact size
    • Medical safety approved (2 x MOPP) according to ANSI/AAMI WS60601-1 and IEC/EN60601-1
    • Suitable for BF application with appropriate system consideration
    • NO load power consumption <0.075W
    • Extremely low leakage current
    • Wide operating temp range -30~+85C
    • EMI Class B for Class II configuration
    • Protections: Short circuit/ Overload/ Over voltage/ Over temperature
    • No minimum load required
    • Typical lifetime > 48K hours
    • 3 years warranty
    More information Compare
  • 10W Single Output Encapsulated Medical PSU

    Featuring class II isolation levels they can be equiped into non-patient contact medical equipment and still comply with class B as per EMI regulations. With energy saving and the environment in mind the no load power consumption is lower than 0.5W so that it complies with the requirements for “green mode” power supplies. Standard functions…

    Features

    • Universal AC input/full range
    • Ultra low profile
    • Isolation class II
    • No load power consumption <0.5W
    • Fixed switching frequency at 67KHz
    • Short circuit, over load & over voltage protections
    • UL60601-1, IEC60601-1 & TUV EN60601-1 medical safety approved
    • Cooling by free air convection
    • Fixed switching frequency at 67KHz
    More information Compare
  • 15W Single Output Encapsulated Medical PSU

    Featuring class II isolation levels they can be equiped into non-patient contact medical equipment and still comply with class B as per EMI regulations. With energy saving and the environment in mind the no load power consumption is lower than 0.5W so that it complies with the requirements for “green mode” power supplies. Standard functions…

    Features

    • Universal AC input/full range
    • Ultra low profile
    • Isolation class II
    • No load power consumption <0.5W
    • Short circuit, over load, over voltage protections
    • UL60601-1, IEC60601-1 & TUV EN60601-1 medical safety approved
    • Cooling by free air convection
    • Fixed switching frequency at 67KHz
    More information Compare
  • 15W Single Output Encapsulated Medical PSU

    Featuring class II isolation levels they can be equiped into non-patient contact medical equipment and still comply with class B as per EMI regulations. With energy saving and the environment in mind the no load power consumption is lower than 0.5W so that it complies with the requirements for “green mode” power supplies. Standard functions…

    Features

    • Universal AC input/full range
    • Ultra low profile
    • Isolation class II
    • No load power consumption <0.5W
    • Short circuit, OLP & OVP
    • UL60601-1 & TUV EN60601-1 medical safety approved
    • Cooling by free air convection
    • Fixed switching frequency at 67KHz
    More information Compare
  • 15W Single Output Encapsulated Medical PSU

    Featuring class II isolation levels they can be equiped into non-patient contact medical equipment and still comply with class B as per EMI regulations. With energy saving and the environment in mind the no load power consumption is lower than 0.5W so that it complies with the requirements for “green mode” power supplies. Standard functions…

    Features

    • Universal AC input/full range
    • Ultra low profile
    • Isolation class II
    • No load power consumption <0.5W
    • Short circuit, OLP & OVP
    • UL60601-1 & TUV EN60601-1 medical safety approved
    • Cooling by free air convection
    • Fixed switching frequency at 67KHz
    More information Compare
  • 15W Single Output Encapsulated Medical PSU

    Featuring class II isolation levels they can be equiped into non-patient contact medical equipment and still comply with class B as per EMI regulations. With energy saving and the environment in mind the no load power consumption is lower than 0.5W so that it complies with the requirements for “green mode” power supplies. Standard functions…

    Features

    • Universal AC input/full range
    • Ultra low profile
    • Isolation class II
    • No load power consumption <0.5W
    • Short circuit, OLP & OVP
    • UL60601-1 & TUV EN60601-1 medical safety approved
    • Cooling by free air convection
    • Fixed switching frequency at 67KHz
    More information Compare
  • 200W Single Output Medical Type Enclosed Power Supply

    The MSP-200 series is a medical grade enclosed power supply, offering a low leakage current, high efficiency, low no load power consumption and 1U low profile. Complying with international medical safety regulations to fulfill the high quality demands of medical applications.

    Features

    • Universal AC input/Full range
    • Built-in active PFC function, PF>0.95
    • High efficiency up to 89%
    • Withstand 300VAC surge input for 5 seconds
    • Protections: Short circuit/Overload/Over voltage/Over temperature
    • Cooling by free air convection
    • Built-in constant current limiting circuit
    • 1U low profile 38mm
    • Built-in remote ON-OFF control
    • Standby 5V@0.3A
    • Built-in remote sense function
    • No load power consumption <0.5W
    More information Compare
  • 20W Single Output Encapsulated Medical PSU

    The PM series has been developed to extend our medical product line to include 5 to 20W applications. Featuring a low leakage current of 200uA at 264VAC this unit can be equiped into non-patient contact medical equipment and still comply with class B as per EMI regulations. With energy saving and the environment in mind…

    Features

    • Universal AC input / full range
    • Protections: Short circuit / Overload / Over voltage
    • Low leakage current <300µA
    • Cooling by free air convection
    • Medical Safety approved (2 x MOPP between primary to secondary)
    • Ultra miniature size, light weight
    • No load power consumption <0.75W
    • 100% full load burn-in test
    • Fixed switching frequency at 90KHZ
    • High reliability
    • Suitable for BF application with appropiate system consideration
    • 3 years warranty
    More information Compare
  • 300W Single Output AC/DC Medical Type Power Supply

    The MSP-300 Series is a 300W AC/DC medical enclosed power supply; complying to medical safety regulations and characterized by its low leakage current making the series suitable for “non patient contact” equipment. With up-to-date high frequency switching technology it posesses up to 89% of high effiency allowing the power supply to be cooled by the…

    Features

    • Universal AC input/Full range
    • Built-in active PFC function, PF>0.95
    • High efficiency up to 89%
    • Withstand 300VAC surge input for 5 seconds
    • Protections: Short circuit/Overload/Over voltage/Over temperature
    • Built-in constant current limiting circuit
    • 1U low profile 41mm
    • Built-in cooling fan ON-OFF control
    • Built-in DC OK signal
    • Built-in remote ON-OFF control
    • Standby 5V@0.3A
    • Built-in remote sense function
    • No load power condumption <0.5W
    More information Compare
  • 30W AC/DC High Reliable Green Medical Encapsulated Type

    MPM-30 is a 30W high density and small sized AC/DC module type medical grade power supply series offered in pin type.

    Features

    • 2.73″X1.53 compact size
    • Medical safety approved (2 x MOPP) according to ANSI/AAMI WS60601-1 and IEC/EN60601-1
    • Suitable for BF application with appropriate system consideration
    • No load power consumption <0.075W
    • Extremely low leakage current
    • Wide operating temp range -40~+85C
    • EMI Class B for Class II configuration
    • Protections: Short circuit/ Overload/ Over voltage/ Over temperature
    • No minimum load required
    • Typical lifetime > 48K hours
    • 3 years warranty
    More information Compare
  • 5W High Density AC/DC Reliable Green Medical Encapsulated Type

    MPM-05 is a 5W high density and small sized AC/DC module type medical grade power supply series offered in pin type.

    Features

    • 1.8″x1″ compact size
    • Medical safety approved (2 x MOPP) according to ANSI/AAMI WS60601-1 and IEC/EN60601-1
    • Suitable for BF application with appropriate system consideration
    • NO load power consumption <0.075W
    • Extremely low leakage current
    • Wide operating temp range -40~+85C
    • EMI Class B for Class II configuration
    • Protections: Short circuit/ Overload/ Over voltage/ Over temperature
    • No minimum load required
    • Typical lifetime > 48K hours
    • 3 years warranty
    More information Compare
  • 600W Single Output Medical Enclosed Power Supplies

    MSP-600 Series is a range of 600W medical safety regulation compliant (MOOP level) enclosed power supplies with low leakage current. Featuring 85-264VAC input the range is available in output voltages of 3.3V to 48V and possesses up to 89% high efficiency. Standard functions of MSP-600 Series include protections for short circuit, overload, over voltage, and…

    Features

    • Universal AC input 85-264VAC
    • No load power consumption <0.8W
    • Low leakage current <300μA @ 264VAC
    • Built-in active PFC function, PF>0.94
    • High efficiency up to 89%
    • Built-in constant current limiting circuit
    • Built-in remote sense function
    • DC OK signal
    • Built-in remote ON/OFF control & 5V/0.3A standby output
    • Parallel function for MSP-600-24/36/48
    • Withstand 300VAC surge for 5 seconds
    More information Compare

High-Reliability Enclosed Medical Grade Power Supplies; 2xMOOP Medical safety approved