Modular Power Supplies

Showing all 8 results

  • 1000W Modular Power Power Supply

    Switching power supplies with modular design that consists of 2 stages; Front end PFC and output modules. Using zero voltage switching technology to realize the power factor correction, the line input is rectified into high DC voltage by the front end PFC stage, and then the DC output modules will transfer the operating voltage into…

    Features

    • Universal input voltage
    • Uses ZVS technology to reduce power dissipation and improve efficiency
    • Large range of output configurations available
    • Remote control on each module
    • Remote sense on MS-75, 150 & 300 modules
    • Built in active PFC, PF>0.95
    • Built in parallel function on MS-300
    • Fan alarm function
    • Forced air cooling
    More information Compare
  • 100W Dual Output 1 Slot Modular Power Supplies

    The MD100 Series of 100W Dual output 1 SLOT modular power supplies are installed into the following modules for a more bespoke design: MP450 MP650 MP1K0 There are also 75W, 150W, and 300W single output modules to fulfil all kinds of applications up to 14 isolated outputs. There are multiple combinations available for the modular…

    Features

    • For installation in MP450, MP650 & MP1K0 Modules
    More information Compare
  • 150W Single Output 1 Slot Modular Power Supplies

    The MS150 Series of 150W Single output 1 SLOT modular power supplies are installed into the following modules for a more bespoke design: MP450 MP650 MP1K0 There are also 75W, 300W single output modules and 100W dual output modules to fulfil all kinds of applications up to 14 isolated outputs. There are multiple combinations available…

    Features

    More information Compare
  • 300W Single Output parallelable 2 Slot Modular Power Supplies

    The MS300 Series of  300W Single output 2 SLOT modular power supplies are installed into the following modules for a more bespoke design: MP450 MP650 MP1K0 There are also 75W, 150W single output modules and 100W dual output modules to fulfil all kinds of applications up to 14 isolated outputs. There are multiple combinations available…

    Features

    More information Compare
  • 450W Modular Power Power Supply

    Switching power supplies with modular design that consists of 2 stages; Front end PFC and output modules. Using zero voltage switching technology to realize the power factor correction, the line input is rectified into high DC voltage by the front end PFC stage, and then the DC output modules will transfer the operating voltage into…

    Features

    • Universal input voltage
    • Uses ZVS technology to reduce power dissipation and improve efficiency
    • Large range of output configurations available
    • Remote control on each module
    • Remote sense on MS-75, 150 & 300 modules
    • Built in active PFC, PF>0.95
    • Built in parallel function on MS-300
    • Fan alarm function
    • Forced air cooling
    More information Compare
  • 650W Modular Power Power Supply

    Switching power supplies with modular design that consists of 2 stages; Front end PFC and output modules. Using zero voltage switching technology to realize the power factor correction, the line input is rectified into high DC voltage by the front end PFC stage, and then the DC output modules will transfer the operating voltage into…

    Features

    • Universal input voltage
    • Uses ZVS technology to reduce power dissipation and improve efficiency
    • Large range of output configurations available
    • Remote control on each module
    • Remote sense on MS-75, 150 & 300 modules
    • Built in active PFC, PF>0.95
    • Built in parallel function on MS-300
    • Fan alarm function
    • Forced air cooling
    More information Compare
  • 650W/1200W Modular Power

    NMP series is a 650W/1200W modular and configurable power supply.

    Features

    • Medical (2x MOPP) safety approval
    • Suitable for BF application with appropriate system consideration (Touch current < 100uA/264VAC
    • 1U low profile
    • Universal AC input /
    • Full range
    • Output voltage and current programmable
    • Built-in parallel function /output programmable / global enable / remote local ON-OFF / auxiliary DC output /over temperature alarm/ DC OK
    • Cooling by thermostatically controlled fan with fan alarm function
    • Protections: Short circuit /Overload / Over voltage / Over temperature for all output modules
    • 5 years warranty
    More information Compare
  • 75W Single Output 1 Slot Modular Power Supplies

    The MS75 Series of 75W Single output 1 SLOT modular power supplies are installed into the following modules for a more bespoke design: MP450 MP650 MP1K0 There are also 150W, 300W single output modules and 100W dual output modules to fulfil all kinds of applications up to 14 isolated outputs. There are multiple combinations available…

    Features

    More information Compare

Available in 450W, 650W and 1000W, Sunpower’s modular power supplies come with a choice of 35 different output modules ranging from 75W to 300W for single output and 100W for dual output.

Sunpower’s modular power supplies are used for a wide range of general electrical purposes, including RAID controls for servers, semiconductor fabrication equipment, industrial plotters, hard-disk burn-in machines and process controls. With millions of different potential output configurations, Sunpower modular power supplies support up to 14 isolated outputs, a suitable product for all types of specialist applications capable of providing full output wattage even at 100VAC input.

Our modular power supplies also come with a number of features as standard, such as containing a global ON/OFF control, fan alarm function, universal input voltage, advanced ZVS technology, forced air cooling, remote sensors on output modules and 12V/0.1A auxiliary output. With all these features, you can be sure that Sunpower’s range of modular power supplies are highly efficient and are built to a high level of finish.

In addition to this, the 300W Sunpower modules also come with an in-built active current sharing which allows up to three units to be paralleled (2+1).

Have questions regarding this or any other product? If so, then feel free to call Sunpower’s expert and friendly team. They’ll be happy to help answer your questions or talk to you about the process, call them on 0118 9823746.

If you know which product you’d like, you can type either its name or product code into the search bar, allowing you to be taken straight to your chosen product.