Industrial Power Supplies

Showing 1–15 of 71 results

  • 1000W PFC Parallel Function Enclosed Power Supply

    With power factor correction and parallel function this series targets 1U low profile and high wattage applications. Featuring 10.67W/in3 extremely high power density RSP-1000 series can provide rated output wattage even at 100VAC input because of its high efficiency design. With built in trimming function the output voltage can be adjusted between 40% and 110%…

    Features

    • Universal AC input
    • 1U low profile
    • High power density 10.67/in3
    • Built in Active PFC circuit
    • Short circuit, over load, over voltage & over temperature protections
    • Built in ON/OFF control and remote sense
    • Trimable output voltages
    • DC OK signal output
    • Built in active current sharing
    • High efficiency up to 90%
    • Built in 5V/0.5A auxiliary output
    More information Compare
  • 100W 1U Single Output Enclosed Power Supplies with PFC Function

    RSP-100 Series extends the RSP range to include a lower 100W of output power, in a 1U low profile 30mm enclosure. These enclosed power supplies feature high efficiency, free air convection cooling and a 1U low profile making them ideal for end users looking for energy saving, noise free and low profile economical power supplies….

    Features

    • Universal full range AC input
    • Built-in active PFC function
    • Short circuit, over load, over voltage, over temperature protections
    • Built-in constant current limiting circuitry
    • Cooling by free air convection
    • 1U low profile 30mm
    • Remote On-Off Control
    • LED indicator for power on
    More information Compare
  • 100W AC/DC Single Output Enclosed Power Supply with UPS Function Battery Charger

    PSC-100C Series is a 100W AC/DC enclosed power supply with additional charger output, designed primarily for the security industry. The product features 90-264VAC Universal AC input voltage, 13.8V and 27.6V output options and short circuit, overload and over voltage protection. PSC-100C Series has been designed with battery low protection, battery polarity protection, via fuse, and…

    Features

    • 90-264VAC Universal AC input
    • <strong>Enclosed within L-Bracket and cover case</strong>
    • Short circuit, overload, over voltage protection
    • Battery low protection / Battery polarity protection by fuse
    • Relay contact signal output for AC OK and Battery low
    • Cooling by free air convection
    More information Compare
  • 100W Constant Voltage Triac Dimming LED Lighting Power Supplies

    100W constant voltage Triac dimming LED lighting power supplies compatible with leading and trailing edge dimmers

    Features

    • Constant voltage output
    • Fully isolated
    • Short circuit, over current and over voltage protection
    • Fire resistant plastic cover
    • Compatible with leading and trailing edge dimmers
    • 34 ~ 100% Dimming Load
    • 1 ~ 100% Dimming range
    • Mains dimmable
    • Screw terminals
    • IP20 design for indoor use
    • 2 years warranty
    More information Compare
  • 100W Miniture DIN Rail Power Supply

    MDR-100 Series is a slim line DIN rail Class I switching power supply. Designed with a fully isolated plastic case to prevent user contact and the risk of shock. Featuring up to 88% efficiency this series can be cooled using only free air convection up to 60°C which significantly increases the reliability and lifetime of…

    Features

    • Universal AC Input
    • Built-in active PFC function, compliance to EN61000-3-2
    • Short circuit, over load, over voltage, over temperature protections
    • Cooling by free air convection
    • Can be installed on DIN rail TS-35/7.5 or 15
    • LED Indicator for power on
    • DC OK Signal
    • No load power consumption <1W
    • NEC Class 2 limited power source (for 24V & 48V only)
    • 100% full load burn-in test
    • ZCS/ZVS technology to reduce power dissipation
    More information Compare
  • 100W Single Output Class II DIN Rail Power Supply

    DR-100 Series is a Class II switching power supply. Designed with a fully isolated plastic case to prevent user contact and the risk of shock. Other standard features include its low no load power consumption, to save energy, short circuit, over load, over voltage and over temperature protections.

    Features

    • Universal AC input
    • Short circuit, over load, over voltage, over temperature protections
    • Cooling by free air convection
    • Can be installed on DIN rail TS-35/7.5 or 15
    • Isolation class II
    • LED indicator for power on
    • No load power consumption<1W
    • 100% full load burn-in test
    More information Compare
  • 100W Single Output Enclosed Medical Type Power Supply

    The MSP-100 series is a 100W AC-DC highly efficient medical enclosed power supply. Standard features include low leakage current, extremely low no load power consumption, 1U low profile and built in active PFC function. Complying with international safety regulations the power supply is suitable for applications including chemical and biological detection equipment, analysis facilities and…

    Features

    • Universal AC input/Full range
    • Built-in active PFC function
    • High efficiency up to 90%
    • Withstand 300VAC surge input for 5 seconds
    • Protections: Short circuit/Overload/Over voltage
    • protections: Over temperature (Optional)
    • Cooling by free air convection
    • 1U low profile 38mm
    • Medical safety approved (MOOP level)
    • Built-in remote ON-OFF control
    • No load power consumption <0.5W
    More information Compare
  • 100W UPS Function DIN Rail Power Supplies

    DRC-100 Series is designed to meet the high power requirements of the security industry, providing 100W of high-reliability DIN rail power. Designed to be assembled on TS-35/7.5 or TS-35/15 industrial rails inside cabinets DRC-100 series have 90-264VAC input range and offer dual 13.8VDC or 27.6VDC output voltage models, ideal for use with 12V and 24V…

    Features

    • Universal AC Input
    • Alarm signal, via a relay, for AC OK and battery low
    • Battery low protection & battery reverse polarity by fuse
    • Short circuit, overload and over voltage protection
    • LED indicator for power on
    • Wide range -30°C to +70°C working temperature
    • Can be installed on DIN rail TS-35/7.5 or 15
    • Cooling by free air convection
    More information Compare
  • 10W Dual Output Encapsulated PCB Power Supply

    1.5A slow blow type external fuse recommended. Free air convection cooling

    Features

    • Switching Power Modules for PCB Mounting
    • Fully Encapsulated Plastic Case
    • Universal Input Range 90-264VAC, 47-440Hz
    • Regulated Output
    • Low Ripple and Noise
    • High Efficiency
    • CE, cUL, TUV Approvals
    More information Compare
  • 10W Single Output Industrial Din Rail Power Supply

    MDR-10 Series is a range of 10W Class I, full isolated enclosed plastic case, din rail power supplies. With up to 85% efficiency and free air convention cooling, up to 70C, MDR-10’s reliability and lifetime is significantly increased. Featuring low no load power consumption of <0.75W, short circuit, over load & over voltage protections and…

    Features

    • Universal AC input
    • Short circuit, over load, over voltage protections
    • Cooling by free air convection
    • Can be installed on DIN rail TS-35/7.5 or 15
    • NEC class 2 / LPS compliant
    • Built in DC OK active signal
    • LED indicator for power on
    • No load power consumption <0.75W
    • 100% full load burn-in test
    • <strong>Fixed output voltage</strong>
    More information Compare
  • 120W DC-DC DIN Rail Type Converter

    DDR-120 series is a 120W DIN Rail type DC-DC converter series.

    Features

    • Compliance to EN50155 and EN45545-2 railway standard
    • Width only 32mm
    • 2:1 wide input range
    • -40~+70°C wide working temperature
    • 150% peak load capability
    • DC output adjustable
    • Cooling by free air convection
    • Can be installed on DIN rail TS-35/7.5 or 15
    • Protections: Short circuit / Overload / Over voltage /Input reverse polarity / Input under voltage protection
    • 4KVdc I/O isolation(Reinforced isolation)
    • 3 years warranty
    More information Compare
  • 120W Single Output DIN RAIL Power Supply

    The DR-120 series is an industrial din rail power supply with a selectable AC range. Other standard features include short circuit, overload, over voltage and over temperature protections.

    Features

    • AC input range selectable by switch
    • Installed on DIN rail TS35/7.5 or 15
    • Soft start circuit
    • Limiting AC surge current
    • Short circuit, over voltage, over load, over temperature protections
    • 100% full load burn in
    • LED indication for power on
    • UL508(industrial control equipment) approved
    • Fixed switching frequency at 55KHz
    More information Compare
  • 120W Single Output DIN Rail Power Supply

    The DRH-120 Series is a 120W single output industrial din rail power supply with built-in constant current limiting circuit. Cooling by free air convection allows an operating temperature of -20~+60°C. With a fixed switching frequency at 70KHz enabling designs to avoid interference with system clock frequencies.

    Features

    • Short circuit, over load, over voltage & over temperature protections
    • Cooling by free air convection
    • Built-in constant current limiting circuit
    • Can be installed on DIN rail TS-35/7.5 or 15
    • EN61000-6-2(EN50082-2) industrial immunity level
    • 100% full load burn-in test
    • Fixed switching frequency at 70KHz
    More information Compare
  • 120W Single Output Din Rail Power Supply with PFC Function

    SDR-120 Series are a high efficiency slim din rail power supply range with AC/DC isolation Class I. Capable of providing 120W continuously or peaks of 180W, for 3 seconds, these PFC din rail power supplies are available as 12V, 24V & 48V output models.

    Features

    • High efficiency 91% and low power dissipation
    • 150% peak load capability
    • Built-in active PFC function, PF>0.93
    • Short circuit, over load, over voltage, over temperature protections
    • Cooling by free air convection
    • Can be installed on DIN rail TS-35/7.5 or 15
    • UL 508 (industrial control equipment) approved
    • EN61000-6-2(EN50082-2) industrial immunity level
    • Built-in DC OK relay contac
    • 100% full load burn-in test
    • UL / CUL / TUV / CE / CB / SEMI F47 / GL Approvals
    More information Compare
  • 120W Single Output Industrial Din Rail Power Supplies

    WDR-120 Series are a range of 120W AC/DC slim DIN rail power supplies featuring wide input range for both single and two phase power systems. With up to 92% of high efficiency and capability of providing 120W continuously up to 50℃ using only free air convection. WDR-120 series comply with UL/CB/CE certificates and also meet…

    Features

    • Single and two phase wide input range 180~550VAC
    • High efficiency and low power dissipation
    • Protections: Short circuit / Overload / Over voltage / Over temperature
    • Built-in constant current limiting circuit
    • Cooling by free air convection
    • Can be installed on DIN rail TS-35/7.5 or 15
    • UL 508(industrial control equipment)approved
    • EN61000-6-2(EN50082-2) industrial immunity level
    • Built-in DC OK relay contact
    • 100% full load burn-in test
    More information Compare

Industrial Power Supplies