Power Supply Accessories
Showing 1–15 of 51 results
-
+12V Power to 4P Connector Harness
+12V Power to 4P Connector Harness for ATX power supplies.
Features
- Completely compliant with RoHS
- +12V Power Connector Harness (4P)
-
+12V Power to 8P Connector Harness
+12V Power to 8P Connector Harness for ATX power supplies.
Features
- Completely compliant with RoHS
-
12V Power Connector Harness
+12V Power Connector Harness With PCI Express Compatible Connector.
Features
- One +12V connector (4P) and one connector (6P) for PCI-E
- Completely compliant with RoHS
-
20 Pin MotherBoard Harness
20 Pin Motherboard Harness Cable for ATX power supplies.
Features
- 20 Pin Motherboard Harness
- Completely compliant with RoHS
-
20kA High Performance Surge Protection Device
SPD 20HP thermally protected Surge Protective Device is a self protected device which is speciallydesigned to be used in outdoor and commercial LED lighting fixtures for transient over voltage protection.Features
- UL1449 type 4component assemblies
- Line to Ground & Line to Line protected
- Series connection style
- 20kA maximum discharge current(I ), 8/20 μs
- Low MLV / Up
- Thermally protected
- Double insulation cable wire
- LED status indicator
- IP66 design for indoor or outdoor installations
- Suitable for LED driver surge protection with
- class I insulation
-
24 Pin Mother Board Harness
24 Pin Motherboard Harness Cable for ATX power supplies.
Features
- 24 Pin Motherboard Harness
- Completely compliant with RoHS
-
24V Large Capacity (5AH) Lead-Acid Battery Package
24V Large Capacity (5AH) Lead-Acid Battery Pack for use with ATX power supply eNSP3-450P.
Features
- Developed for Nonstop power supply eNSP3-450P
- Corresponding to 450W peak output
- Double space of 5 inch bay size is required.
-
24V Lead-Acid Battery Pack for eNSP3-450
24V Lead-Acid Battery Pack for eNSP3-450,. capable of providing 300W for 1.5 minutes can be backupped with only a 5 inch bay space
Features
- 300W for 1.5 minutes can be backupped with only a 5 inch bay space
- 24V Lead-Acid Battery Pack
-
28A AC Inrush Current Limiter
28A AC Inrush Current Limiter
Features
- 48A inrush limiting current, 28A continuous
- 180~264VAC AC input
- Integrated bypass relay, no simple NTC
- Internal thermal protection
- Installed on DIN rail TS-35/7.5 or 15 (ICL-28R)
- -30~+70°C wide working temperature
- Over voltage category III
- Operating altitude up to 5000 meters
- 3 years warranty
-
3 Pin FAN Signal Harness
3 Pin FAN Signal Harness for ATC power supplies.
Features
- Delivers FAN-M and FAN-C signal
- Completely compliant with RoHS
- * Make sure compatible with the motherboard in use.
-
3U/4U size large capacity battery pack
3U/4U Large Capacity Battery Pack for GNSP Series, capable of being connected to two power supplies at a time.
Features
- Battery package for GNSP series
- Two power supplies can be connected at a time
- RoHS compliant
- Actual appearance may differ from image shown
-
60-475-212R Mounting Bracket
Mounting bracket designed for the Din rail mounting of SPS-G025 Series.
Features
- SPS-G025 mounting bracket
-
Aluminium Case for 4 x 2 Inch Open Frame Power Supplies
A 1mm thick grade 1050 aluminium case suitable for enclosing any 4 x 2″ open frame power supply. Can be wall or surface mounted.
Features
- 1mm thick, grade 1040 aluminium construction
- suitable for use with RPS/D/T-60 Series and any other 4 x 2" open frame power supply
- Wall and surface mountable
-
Blackout Signal Harness
Blackout Signal Harness for use with UPS power Supplies
Features
- For UPS Power Supplies
- Delivers signals of Blackout, shutdown, low battery voltage, and FAN-M in TTL level
- * Make sure of compatibility with the motherboard in use. Some motherboards may require customization. This harness is not required if RS232C cable is used.
-
Cable Joiner
Features
- Suitable for 14AWG ~ 22AWG cables
- Up to 4 wires can be connected through the joiner by soldering or clamping
Power Supply Accessories