Encapsulated Medical Grade Power Supplies

Showing all 12 results

  • 10W AC/DC High Reliable Green Medical Encapsulated Type

    MPM-10 is a10W high density and small sizer (45.7×25.4×21.5mm) AC/DC module type medical grade power supply series offered in pin type.

    Features

    • 1.8″x1″ compact size
    • Medical safety approved (2 x MOPP) according to ANSI/AAMI WS60601-1 and IEC/EN60601-1
    • Suitable for BF application with appropriate system consideration
    • NO load power consumption <0.075W
    • Extremely low leakage current
    • Wide operating temp range -30~+85C
    • EMI Class B for Class II configuration
    • Protections: Short circuit/ Overload/ Over voltage/ Over temperature
    • No minimum load required
    • Typical lifetime > 48K hours
    • 3 years warranty
    More information Compare
  • 10W Single Output Encapsulated Medical PSU

    Featuring class II isolation levels they can be equiped into non-patient contact medical equipment and still comply with class B as per EMI regulations. With energy saving and the environment in mind the no load power consumption is lower than 0.5W so that it complies with the requirements for “green mode” power supplies. Standard functions…

    Features

    • Universal AC input/full range
    • Ultra low profile
    • Isolation class II
    • No load power consumption <0.5W
    • Fixed switching frequency at 67KHz
    • Short circuit, over load & over voltage protections
    • UL60601-1, IEC60601-1 & TUV EN60601-1 medical safety approved
    • Cooling by free air convection
    • Fixed switching frequency at 67KHz
    More information Compare
  • 15W Single Output Encapsulated Medical PSU

    Featuring class II isolation levels they can be equiped into non-patient contact medical equipment and still comply with class B as per EMI regulations. With energy saving and the environment in mind the no load power consumption is lower than 0.5W so that it complies with the requirements for “green mode” power supplies. Standard functions…

    Features

    • Universal AC input/full range
    • Ultra low profile
    • Isolation class II
    • No load power consumption <0.5W
    • Short circuit, OLP & OVP
    • UL60601-1 & TUV EN60601-1 medical safety approved
    • Cooling by free air convection
    • Fixed switching frequency at 67KHz
    More information Compare
  • 15W Single Output Encapsulated Medical PSU

    Featuring class II isolation levels they can be equiped into non-patient contact medical equipment and still comply with class B as per EMI regulations. With energy saving and the environment in mind the no load power consumption is lower than 0.5W so that it complies with the requirements for “green mode” power supplies. Standard functions…

    Features

    • Universal AC input/full range
    • Ultra low profile
    • Isolation class II
    • No load power consumption <0.5W
    • Short circuit, over load, over voltage protections
    • UL60601-1, IEC60601-1 & TUV EN60601-1 medical safety approved
    • Cooling by free air convection
    • Fixed switching frequency at 67KHz
    More information Compare
  • 15W Single Output Encapsulated Medical PSU

    Featuring class II isolation levels they can be equiped into non-patient contact medical equipment and still comply with class B as per EMI regulations. With energy saving and the environment in mind the no load power consumption is lower than 0.5W so that it complies with the requirements for “green mode” power supplies. Standard functions…

    Features

    • Universal AC input/full range
    • Ultra low profile
    • Isolation class II
    • No load power consumption <0.5W
    • Short circuit, OLP & OVP
    • UL60601-1 & TUV EN60601-1 medical safety approved
    • Cooling by free air convection
    • Fixed switching frequency at 67KHz
    More information Compare
  • 15W Single Output Encapsulated Medical PSU

    Featuring class II isolation levels they can be equiped into non-patient contact medical equipment and still comply with class B as per EMI regulations. With energy saving and the environment in mind the no load power consumption is lower than 0.5W so that it complies with the requirements for “green mode” power supplies. Standard functions…

    Features

    • Universal AC input/full range
    • Ultra low profile
    • Isolation class II
    • No load power consumption <0.5W
    • Short circuit, OLP & OVP
    • UL60601-1 & TUV EN60601-1 medical safety approved
    • Cooling by free air convection
    • Fixed switching frequency at 67KHz
    More information Compare
  • 20W Single Output Encapsulated Medical PSU

    The PM series has been developed to extend our medical product line to include 5 to 20W applications. Featuring a low leakage current of 200uA at 264VAC this unit can be equiped into non-patient contact medical equipment and still comply with class B as per EMI regulations. With energy saving and the environment in mind…

    Features

    • Universal AC input / full range
    • Protections: Short circuit / Overload / Over voltage
    • Low leakage current <300µA
    • Cooling by free air convection
    • Medical Safety approved (2 x MOPP between primary to secondary)
    • Ultra miniature size, light weight
    • No load power consumption <0.75W
    • 100% full load burn-in test
    • Fixed switching frequency at 90KHZ
    • High reliability
    • Suitable for BF application with appropiate system consideration
    • 3 years warranty
    More information Compare
  • 30W AC/DC High Reliable Green Medical Encapsulated Type

    MPM-30 is a 30W high density and small sized AC/DC module type medical grade power supply series offered in pin type.

    Features

    • 2.73″X1.53 compact size
    • Medical safety approved (2 x MOPP) according to ANSI/AAMI WS60601-1 and IEC/EN60601-1
    • Suitable for BF application with appropriate system consideration
    • No load power consumption <0.075W
    • Extremely low leakage current
    • Wide operating temp range -40~+85C
    • EMI Class B for Class II configuration
    • Protections: Short circuit/ Overload/ Over voltage/ Over temperature
    • No minimum load required
    • Typical lifetime > 48K hours
    • 3 years warranty
    More information Compare
  • 45W AC-DC PCB-Mount Green Medical Power Supplies

    The MPM-45 is a 45W high density AC/DC PCB mount type medical grade power supply. Featuring 80 ~ 264VAC and 2 x MOPP level, this device is perfectly suited to medical devices and equipment.

    Features

    • 3.43″ x 2.05″ compact size
    • PCB chassis or screw terminal mounting version
    • Medical safety approved (2 x MOPP) according to ANSI/AAMI ES60601-1 and IEC/EN60601-1
    • Suitable for BF application with appropriate system consideration
    • No load power consumption <0.1W
    • Extremely low leakage current
    • Wide operating temperature range -30 ~ +80°C
    • EMI Class B without additional components
    • Isolation Class II
    • Protections: Short circuit/ Overload/ Over voltage
    • No minimum load required
    • Operating altitude up to 4000 meters
    • 50W peak
    • 3 years warranty
    More information Compare
  • 5W High Density AC/DC Reliable Green Medical Encapsulated Type

    MPM-05 is a 5W high density and small sized AC/DC module type medical grade power supply series offered in pin type.

    Features

    • 1.8″x1″ compact size
    • Medical safety approved (2 x MOPP) according to ANSI/AAMI WS60601-1 and IEC/EN60601-1
    • Suitable for BF application with appropriate system consideration
    • NO load power consumption <0.075W
    • Extremely low leakage current
    • Wide operating temp range -40~+85C
    • EMI Class B for Class II configuration
    • Protections: Short circuit/ Overload/ Over voltage/ Over temperature
    • No minimum load required
    • Typical lifetime > 48K hours
    • 3 years warranty
    More information Compare
  • 5W Single Output Encapsulated Medical PSU

    Featuring class II isolation levels they can be equiped into non-patient contact medical equipment and still comply with class B as per EMI regulations. With energy saving and the environment in mind the no load power consumption is lower than 0.5W so that it complies with the requirements for “green mode” power supplies. Standard functions…

    Features

    • Universal AC input/full range
    • Ultra low profile
    • Isolation class II
    • No load power consumption <0.5W
    • Short circuit, OLP & OVP
    • UL60601-1 & TUV EN60601-1 medical safety approved
    • Cooling by free air convection
    • Fixed switching frequency at 67KHz
    More information Compare
  • 65W AC/DC PCB Mount Medical Power Supply

    MPM-65 Series is a 65W high density and small size AC/DC PCB mount type medical grade power supply, suitable for various medical applications including portable medical devices and medical examination instruments.

    Features

    • Compact size
    • PCB chassis or screw terminal mounting version
    • Medical safety approved
    • Suitable for BF application with appropriate system consideration
    • No load power consumption <0.1W
    • Extremely low leakage current
    • Wide operating temperature range -30 ~ +80°C
    • EMI Class B without additional components
    • Isolation Class II
    • Protections: short circuit / overload / over voltage
    • No minimum load required
    • Operating altitude up to 4000 metres
    • 71W peak (10 seconds)
    • 3 years warranty
    More information Compare

Encapsulated Medical Grade Power Supplies