Industrial Din Rail Power Supplies

Showing 1–15 of 26 results

  • 100W Miniture DIN Rail Power Supply

    MDR-100 Series is a slim line DIN rail Class I switching power supply. Designed with a fully isolated plastic case to prevent user contact and the risk of shock. Featuring up to 88% efficiency this series can be cooled using only free air convection up to 60°C which significantly increases the reliability and lifetime of…

    Features

    • Universal AC Input
    • Built-in active PFC function, compliance to EN61000-3-2
    • Short circuit, over load, over voltage, over temperature protections
    • Cooling by free air convection
    • Can be installed on DIN rail TS-35/7.5 or 15
    • LED Indicator for power on
    • DC OK Signal
    • No load power consumption <1W
    • NEC Class 2 limited power source (for 24V & 48V only)
    • 100% full load burn-in test
    • ZCS/ZVS technology to reduce power dissipation
    More information Compare
  • 100W UPS Function DIN Rail Power Supplies

    DRC-100 Series is designed to meet the high power requirements of the security industry, providing 100W of high-reliability DIN rail power. Designed to be assembled on TS-35/7.5 or TS-35/15 industrial rails inside cabinets DRC-100 series have 90-264VAC input range and offer dual 13.8VDC or 27.6VDC output voltage models, ideal for use with 12V and 24V…

    Features

    • Universal AC Input
    • Alarm signal, via a relay, for AC OK and battery low
    • Battery low protection & battery reverse polarity by fuse
    • Short circuit, overload and over voltage protection
    • LED indicator for power on
    • Wide range -30°C to +70°C working temperature
    • Can be installed on DIN rail TS-35/7.5 or 15
    • Cooling by free air convection
    More information Compare
  • 120W DC-DC DIN Rail Type Converter

    DDR-120 series is a 120W DIN Rail type DC-DC converter series.

    Features

    • Compliance to EN50155 and EN45545-2 railway standard
    • Width only 32mm
    • 2:1 wide input range
    • -40~+70°C wide working temperature
    • 150% peak load capability
    • DC output adjustable
    • Cooling by free air convection
    • Can be installed on DIN rail TS-35/7.5 or 15
    • Protections: Short circuit / Overload / Over voltage /Input reverse polarity / Input under voltage protection
    • 4KVdc I/O isolation(Reinforced isolation)
    • 3 years warranty
    More information Compare
  • 120W Single Output Din Rail Power Supply with PFC Function

    SDR-120 Series are a high efficiency slim din rail power supply range with AC/DC isolation Class I. Capable of providing 120W continuously or peaks of 180W, for 3 seconds, these PFC din rail power supplies are available as 12V, 24V & 48V output models.

    Features

    • High efficiency 91% and low power dissipation
    • 150% peak load capability
    • Built-in active PFC function, PF>0.93
    • Short circuit, over load, over voltage, over temperature protections
    • Cooling by free air convection
    • Can be installed on DIN rail TS-35/7.5 or 15
    • UL 508 (industrial control equipment) approved
    • EN61000-6-2(EN50082-2) industrial immunity level
    • Built-in DC OK relay contac
    • 100% full load burn-in test
    • UL / CUL / TUV / CE / CB / SEMI F47 / GL Approvals
    More information Compare
  • 120W Single Output Industrial Din Rail Power Supplies

    WDR-120 Series are a range of 120W AC/DC slim DIN rail power supplies featuring wide input range for both single and two phase power systems. With up to 92% of high efficiency and capability of providing 120W continuously up to 50℃ using only free air convection. WDR-120 series comply with UL/CB/CE certificates and also meet…

    Features

    • Single and two phase wide input range 180~550VAC
    • High efficiency and low power dissipation
    • Protections: Short circuit / Overload / Over voltage / Over temperature
    • Built-in constant current limiting circuit
    • Cooling by free air convection
    • Can be installed on DIN rail TS-35/7.5 or 15
    • UL 508(industrial control equipment)approved
    • EN61000-6-2(EN50082-2) industrial immunity level
    • Built-in DC OK relay contact
    • 100% full load burn-in test
    More information Compare
  • 15W DC-DC DIN Rail Type Converter

    DDR-15 series is a 15W DIN Rail type DC-DC converter.

    Features

    • Width only 17.5mm (1SU)
    • 4:1 ultra wide input range
    • -40~+85°C wide working temperature
    • No minimum load required
    • DC output adjustable (+10%)
    • Cooling by free air convection
    • Can be installed on DIN rail TS-35/7.5 or 15
    • Protections: Short circuit/ Overload/ Over voltage / Input reverse polarity/ Input under voltage protection
    • 4KVdc I/O isolation (Reinforced isolation)
    • 3 years warranty
    More information Compare
  • 15W Single Output Slimline Din Rail Power Supplies

    The HDR-15 series is a range of slimline Din Rail power supplies, designed for installation on TS-35/7.5 or TS-35/15 mounting rails. The units offer full range AC input of 85Vac to 264Vac and conforms to EN61000-3-2 European Union harmonic current regulations. With working efficiency up to 85% the HDR-15 series can operate at an ambient…

    Features

    • Ultra slim design with 17.5mm (1SU) width
    • Universal input 85~264VAC (277VAC available)
    • No load power consumption <0.3W
    • Isolation class II
    • Pass LPS (Limited power source)
    • DC output voltage adjustable
    • Short Circuit, overload, over voltage protections
    • DIN rail TS-35/7.5 or 15 mountable
    • Cooling by free air convection (working temperature: -30C to +70C)
    • Led indicator for power on
    • 3 years warranty
    More information Compare
  • 240W Single Output Industrial Din Rail Power Supplies

    WDR-240 Series are a range of 240W AC/DC slim DIN rail power supplies featuring wide input range for both single and two phase power systems. With up to 91% of high efficiency and capability of providing 240W continuously up to 50℃ using only free air convection. WDR-240 series comply with UL/CB/CE certificates and also meet…

    Features

    • Single and two phase wide input range 180~550VAC
    • High efficiency 91% and low power dissipation
    • Protections: Short circuit / Overload / Over voltage / Over temperature
    • Cooling by free air convection
    • Can be installed on DIN rail TS-35/7.5 or 15
    • UL 508(industrial control equipment)approved
    • EN61000-6-2(EN50082-2) industrial immunity level
    • Built-in DC OK relay contact
    • 100% full load burn-in test
    More information Compare
  • 240W Single Output Industrial Din Rail PSU

    SDR-240 Series is a 240W slim din rail power supply featuring 93.5%+ high efficiency in a slim 63.5mm design. A full input range switcher with built in PFC function and 360W peak power ability for 3 seconds SDR-240 also has standard functions that include DC OK relay contact, on panel LED indicator, and short-circuit, overload,…

    Features

    • Built-in active PFC function, PF>0.93
    • High efficiency 93% and low power dissipation
    • Short circuit, over load, over voltage, over temperature protections
    • Cooling by free air convection
    • Built-in constant current limiting circuit
    • Can be installed on DIN rail TS-35/7.5 or 15
    • UL 508(industrial control equipment)approved
    • EN61000-6-2(EN50082-2) industrial immunity level
    • Built-in DC OK Relay contact
    • 100% full load burn-in test
    • 150% peak load capability
    More information Compare
  • 240W Three Phase Industrial DIN Rail Power Supply

    The DRT-240 series is a 240W three phase industrail din rail power supply. With a wide input range of 340~550VAC, high efficiency over 89% and protections including short circuit and over temperature. The series can be installed on a mounting plate; TS-35-7.5 or 15 and is approved to UL508.

    Features

    • Three-Phase AC 340 ~ 550V wide range input
    • High efficiency 89% and low dissipation
    • Short circuit, over load, over voltage & over temperature protections
    • Cooling by free air convection
    • Built-in constant current limiting circuit
    • Can be installed on DIN rail TS-35/7.5 or 15
    • UL 508(industrial control equipment)approved
    • EN61000-6-2(EN50082-2) industrial immunity level
    • 100% full load burn-in test
    More information Compare
  • 30W DC-DC DIN Rail Type Converter

    DDR-30 series is a 30W DIN Rail type DC-DC converter.

    Features

    • Width only 17.5mm (1SU)
    • 4:1 ultra wide input range
    • -40~+85°C wide working temperature
    • No minimum load required
    • DC output adjustable (+10%)
    • Cooling by free air convection
    • Can be installed on DIN rail TS-35/7.5 or 15
    • Protections: Short circuit/ Overload/ Over voltage / Input reverse polarity/ Input under voltage protection
    • 4KVdc I/O isolation (Reinforced isolation)
    • 3 years warranty
    More information Compare
  • 30W Single Output Slimline DIN Rail Power Supplies

    HDR-30 Series is an ultra slim 30W DIN rail power supply range, adapted to be installed on TS-35/7.5 or TS-35/15 mounting rails. The body is 35mm (2SU) in width, which allows space saving inside the cabinets. The unit offers full range AC input from 85VAC to 264VAC (277VAC also available) and conforms to EN61000-3-2 European…

    Features

    • Ultra slim design with 35mm (2SU) width
    • Universal input 85~264VAC (277VAC available)
    • No load power consumption <0.3W
    • Isolation class II
    • Pass LPS (Limited power source)
    • DC output voltage adjustable
    • Protections: Short Circuit / Overload / Over voltage
    • DIN rail TS-35/7.5 or 15 mountable
    • Cooling by free air convection
    • (working temperature: -30 ~ +70C)
    • Led indicator for power on
    • 3 years warranty
    More information Compare
  • 40W Single Output Switching DIN RAIL Power Supplies with UPS Function

    DRC-40 Series are a range of 40W DIN Rail power supplies with secondary charger output, for use as the power supply for backup batteries, in security access systems. The range is of fanless design, has a 90-264VAC input range, efficiencies up to 87% and air convection cooled operating temperatures of -30C to +70C. DRC-40 Series…

    Features

    • Universal AC input
    • Secondary output for battery charging (UPS Function)
    • Battery low protection/Battery polarity protection by fuse
    • Alarm signal for AC OK and Battery low
    • Can be installed on DIN rail TS-35/7.5 or 15
    • Short circuit, over load, over voltage protections
    • Cooling by free air convection
    • LED indicator for power on
    • 3 years warranty
    More information Compare
  • 480W Single Output Industrial Din Rail Power Supplies

    WDR-480 Series are a range of 480W AC/DC slim DIN rail power supplies featuring wide input range for both single and two phase power systems. With up to 93% of high efficiency and capability of providing 480W continuously up to 50℃ using only free air convection. WDR-480 series comply with UL/CB/CE certificates and also meet…

    Features

    • Single and two phase wide input range 180~550VAC
    • High efficiency 93% and low power dissipation
    • Protections: Short circuit / Overload / Over voltage / Over temperature
    • Cooling by free air convection
    • Can be installed on DIN rail TS-35/7.5 or 15
    • UL 508(industrial control equipment)approved
    • EN61000-6-2(EN50082-2) industrial immunity level
    • Built-in DC OK relay contact
    • 100% full load burn-in test
    More information Compare
  • 480W Single Output Industrial Din Rail Power Supply with PFC and Parallel Function

    SDR-480P Series is a 480W slim din rail power supply with PFC and parallel function featuring 94%+ high efficiency in a slim 85mm design. A full input range switcher with built in PFC function and 720W peak power ability for 3 seconds SDR-480P also has standard functions that include DC OK relay contact, on panel…

    Features

    • Current sharing up to 3840W (7+1)
    • High efficiency 94% and low power dissipation
    • 150% peak load capability
    • Built-in active PFC function, PF>0.94
    • Protections: Short circuit/Overload/Over voltage/Over temperature
    • Cooling by free air convection
    • Built-in constant current limiting circuit
    • Can be installed on DIN rail TS-35/7.5 or 15
    • UL508 (Industrial control equipment) approved
    • EN61000-6-2(EN50082-2) industrial immunity level
    • Built-in DC OK relay contact
    • 100% full load burn-in test
    More information Compare

Industrial Din Rail Power Supplies