Desktop Battery Chargers

Showing 1–15 of 16 results

  • 1000W Intelligent Single Output Battery Charger

    An intelligent 1000W AC/DC battery charger for lead acid batteries with selectable 2 stage/8 stage charging characteristics. Up top 2 battery banks can be connected to PB-1000 at the same time. Features include built-in temperature compensation circuit, PFC function, remote ON/OFF control, fan ON/OFF control, reverse polarity, short circuit, over-voltage, and over temperature protections.

    Features

    • Charger for lead-acid batteries (flooded, Gel and AGM) and li-ion batteries (lithium iron and lithium manganese)
    • 2/3/8 stage charging selectable on output panel
    • Universal AC input / full range
    • Built-in battery rescue function
    • Built in active PFC function PF>0.95
    • Controlled by microprocessor
    • Protections: Short circuit / Reverse Polarity / Over voltage / Over temperature
    • Built in remote ON / OFF control
    • 2-bank charger
    • Temperature compensation function
    • Fan ON / OFF control (depends on charging current)
    • 3 colour LED loading indicator
    • 3 years warranty
    More information Compare
  • 120W 2 Stage Desktop Battery Charger

    Features

    • AC input range selected by switch
    • Built-in passive PFC function compliance to EN61000-3-2
    • With AC ON-OFF switch
    • 3 poles AC inlet with fuse holder
    • Short circuit, over load, over voltage, over temperature protections
    • Charger type can be selected (optional)
    • Charger for Lead Acid Batteries
    • 2 colour LED loading indicator
    • Open frame available
    • Low cost, High reliability
    More information Compare
  • 120W Pulse Charge Desktop Battery Charger

    Features

    • AC input range selected by switch
    • Built-in passive PFC function compliance to EN61000-3-2
    • With AC ON-OFF switch
    • 3 poles AC inlet with fuse holder
    • Short circuit, over load, over voltage, over temperature protections
    • Charger type can be selected (optional)
    • Charger for Lead Acid Batteries
    • 2 colour LED loading indicator
    • Open frame available
    • Low cost, High reliability
    More information Compare
  • 120W Single Output Battery Charger

    Features

    • 2 Stage charging characteristics
    • Universal AC input/full range
    • Built-in active OFC function, PF>0.97
    • No load power consumption <0.5W
    • 3 pole AC inlet IEC320-C14
    • Class I power (With earth pin)
    • Protections: Short circuit/Overload/Over voltage/Over temperature
    • Cooling by free air convection
    • Full enclosed plastic case
    • 2 colour LED indicator for charging status
    More information Compare
  • 180W AC/DC Programmable Desktop Type Battery Charger

    ENC-180 is a single output 180W AC/DC desktop type charger with 3 stage charging curve.

    Features

    • Charger for lead-acid batteries (flooded, Gel and AGM) and li-ion batteries (lithium iron and lithium manganese)
    • Built-in 3 stage programmable charging curve
    • Universal AC input / Full range
    • Built-in active PFC function
    • Fanless design, cooling by free air convection
    • Built-in temperature compensation function
    • Protection: Short circuit / Over voltage / Over temperature / Battery under voltage / Battery over voltage / Battery reverse polarity protection
    • 3 years warranty
    More information Compare
  • 220W AC-DC Single Output 2 Stage Battery Chargers

    GC220 Series are a range of 220W Class I power 2 stage battery chargers with built in active PFC function. Featuring low no load power consumption and high efficiency, up to 93% these battery chargers fulfil the energy saving and environmental requirements of many new builds.

    Features

    • 2 stage charging characteristic
    • Universal AC input / Full range
    • Built-in active PFC function, PF>0.91
    • No load power consumption <1W
    • 3 pole AC inlet IEC320-C14
    • Class I power ( with earth pin)
    • Short circuit, over load, over voltage, over temperature protections
    • Fully enclosed plastic case
    • 2 colour LED indicator for charge status
    • Approvals: UL / CUL / TUV / CB / FCC / CE
    More information Compare
  • 230W Single Output Battery Charger

    Features

    • 3 Stage charging characteristic
    • Universal AC input
    • Built-in active PFC Function
    • Short Circuit, Over Load, Over Voltage Protections
    • Built-in cooling fan ON-OFF control
    • Built-in remote ON-OFF control
    • 2 colour LED loading indicator
    • Low cost, high reliability
    More information Compare
  • 240W AC/DC Programmable Desktop Type Battery Charger

    ENC-240 is a single output 240W AC/DC desktop type charger with 3 stage charging curve.

    Features

    • Charger for lead-acid batteries (flooded, Gel and AGM) and li-ion batteries (lithium iron and lithium manganese)
    • Built-in 3 stage programmable charging curve
    • Universal AC input /Full range
    • Built-in active PFC function
    • Fanless design, cooling by free air convection
    • Built-in temperature compensation function
    • Protection: Short circuit / Over voltage /Over temperature / Battery under voltage /Battery over voltage / Battery reverse polarity protection
    • 3 years warranty
    More information Compare
  • 30W AC-DC Power Adapter with Charging Function

    Universal AC input 30W lithium ion battery chargers designed with energy saving and the environment in mind, they also comply with global safety requirements and the 2002/95/EC RoHS requirements. No load power consumption <1W, dual colour LED, to indicate charging status, and built in short curcuit, over load, over voltage and over temperature protections are…

    Features

    • Universal AC input
    • 2 pole AC Inlet IEC320-C8
    • Class II power (without earth pin)
    • No load power consumption <1.0W
    • Constant current and voltage(CC,CV mode)
    • Suitable for continuous load
    • For high surge current equipment
    • Short circuit, over load, over voltage & over temperature protectiond
    • 2 colors LED indication for charging status
    • Fully enclosed plastic case
    • High reliability
    More information Compare
  • 330W Single Output Battery Charger

    The GC330 series is an AC/DC battery charger possessing very low “no load power consumption” and up to 93.5% of high efficiency. Offering a two stage charging curve (constant current and constant voltage) and can monitor the battery capacity by detecting the battery voltage. The device can quickly charge the battery at constant current mode…

    Features

    • 2 Stage charging characteristic
    • Universal AC input/Full range
    • Built-in active PFC function, PFC>0.95
    • 3 Pole AC inlet IEC320-C14
    • Class I power (with earth pin)
    • Protections: Short circuit/Overload/Over voltage/Over temperature
    • Cooling by free air convection
    • Fully enclosed plastic case
    • No load power consumption <1W
    • 2 colour LED indicator for charging status
    More information Compare
  • 360W AC/DC Programmable Desktop Type Battery Charger

    ENC-360 is a single output 360W AC/DC desktop type charger with 3 stage charging curve.

    Features

    • Charger for lead-acid batteries (flooded, Gel and AGM) and li-ion batteries (lithium iron and lithium manganese)
    • Built-in 3 stage programmable charging curve
    • Universal AC input / Full range
    • Built-in active PFC function
    • Fanless design, cooling by free air convection
    • Built-in temperature compensation function
    • Protection: Short circuit / Over voltage / Over temperature / Battery under voltage / Battery over voltage / Battery reverse polarity protection
    • 3 years warranty
    More information Compare
  • 600W Intelligent Single Output Battery Charger

    An intelligent 600W AC/DC battery charger for lead acid batteries with selectable 2 stage/8 stage charging characteristics. Features include built-in temperature compensation circuit, PFC function, remote ON/OFF control, fan ON/OFF control, reverse polarity, short circuit, over-voltage, and over temperature protections.

    Features

    • Charger for lead-acid batteries (flooded, Gel and AGM) and li-ion batteries (lithium iron and lithiu, manganese)
    • 2/3/8 stage charging
    • Universal AC input / full range
    • Built-in battery rescue function
    • Built in active PFC function PF>0.95
    • Controlled by microprocessor
    • Protections: Short circuit / Reverse Polarity / Over voltage / Over temperature
    • Built remote ON/OFF control
    • Built in remote ON/OFF control
    • Built in temperature compensation function
    • Built in fan speed control (depends on charging current)
    • 3 colour LED loading indicator
    • 3 years warranty
    More information Compare
  • Battery Charger

    Designed for lead acid batteries featuring 3 stage charging characteristics and the automated derating capability for charging current under high ambient temperatures, these intelligent chargers will quickly and efficiently feed your hungry batteries and ensure the lifetime of them at the same time. With the passive PFC function PB-300 can comply with the harmonic requirements…

    Features

    • 3 stage charging
    • AC 115/230VAC selected by switch
    • Built-in passive PFC function compliance to EN61000-3-2 Class A (option)
    • Protection:Reverse Polarity/Short circuit/Over voltage/Over temperature
    • Cooling by free air convection
    • Charger for lead-acid batteries
    • 2 color LED loading indicator
    • Low cost, High reliability
    More information Compare
  • Battery Charger, 360W

    Designed for lead acid batteries (flooded, Gel and AGM) and featuring 3 stage charging characteristics, automated derating capability for charging current under high ambient temperatures, these intelligent chargers will quickly and efficiently feed your hungry batteries and ensure the lifetime of them at the same time. With the passive PFC function PB-360 can comply with…

    Features

    • Charger for lead-acid batteries (flooded, Gel and AGM) and li-ion batteries (lithium iron and lithium manganese)
    • 3 stage charging
    • AC 115/230Vac selected by switch
    • Built-in passive PFC function compliance to EN61000-3-2 Class A (option)
    • Protections: Short circuit / Reverse Polarity / Overload / Over temperature
    • 2 colour LED loading indicator
    • Low cost, High reliability
    • Fan ON / OFF control (Depends on charging current)
    • 3 years warranty
    More information Compare
  • Car Sealed Lead Acid Battery Charger

    Features

    • AC input range selected by switch
    • Short circuit, over load, over voltage, over temperature protection
    • Battery under/over voltage and polarity protection
    • Fixed switching frequency at 25KHz
    • 3 colour LED loading indicator
    More information Compare

Desktop Battery Chargers