Battery Chargers

Showing 1–15 of 28 results

  • 1000W Intelligent Single Output Battery Charger

    An intelligent 1000W AC/DC battery charger for lead acid batteries with selectable 2 stage/8 stage charging characteristics. Up top 2 battery banks can be connected to PB-1000 at the same time. Features include built-in temperature compensation circuit, PFC function, remote ON/OFF control, fan ON/OFF control, reverse polarity, short circuit, over-voltage, and over temperature protections.

    Features

    • Charger for lead-acid batteries (flooded, Gel and AGM) and li-ion batteries (lithium iron and lithium manganese)
    • 2/3/8 stage charging selectable on output panel
    • Universal AC input / full range
    • Built-in battery rescue function
    • Built in active PFC function PF>0.95
    • Controlled by microprocessor
    • Protections: Short circuit / Reverse Polarity / Over voltage / Over temperature
    • Built in remote ON / OFF control
    • 2-bank charger
    • Temperature compensation function
    • Fan ON / OFF control (depends on charging current)
    • 3 colour LED loading indicator
    • 3 years warranty
    More information Compare
  • 100W AC/DC Single Output Enclosed Power Supply with UPS Function Battery Charger

    PSC-100C Series is a 100W AC/DC enclosed power supply with additional charger output, designed primarily for the security industry. The product features 90-264VAC Universal AC input voltage, 13.8V and 27.6V output options and short circuit, overload and over voltage protection. PSC-100C Series has been designed with battery low protection, battery polarity protection, via fuse, and…

    Features

    • 90-264VAC Universal AC input
    • <strong>Enclosed within L-Bracket and cover case</strong>
    • Short circuit, overload, over voltage protection
    • Battery low protection / Battery polarity protection by fuse
    • Relay contact signal output for AC OK and Battery low
    • Cooling by free air convection
    More information Compare
  • 100W AC/DC Single Output Open Frame Power Supply with UPS Function Battery Charger

    PSC-100 Series is a 100W AC/DC PCB type open frame power supply with additional charger output, designed primarily for the security industry. The product features 90-264VAC Universal AC input voltage, 13.8V and 27.6V output options and short circuit, overload and over voltage protection. PSC-100 Series has been designed with battery low protection, battery polarity protection,…

    Features

    • 90-264VAC Universal AC input
    • Short circuit, over load, over voltage protections
    • Battery low protection / Battery polarity protection by fuse
    • Relay contact signal output for AC OK and Battery low
    • Cooling by free air convection
    • 100% full load burn-in test
    • 5″x3″ compact size
    More information Compare
  • 100W UPS Function DIN Rail Power Supplies

    DRC-100 Series is designed to meet the high power requirements of the security industry, providing 100W of high-reliability DIN rail power. Designed to be assembled on TS-35/7.5 or TS-35/15 industrial rails inside cabinets DRC-100 series have 90-264VAC input range and offer dual 13.8VDC or 27.6VDC output voltage models, ideal for use with 12V and 24V…

    Features

    • Universal AC Input
    • Alarm signal, via a relay, for AC OK and battery low
    • Battery low protection & battery reverse polarity by fuse
    • Short circuit, overload and over voltage protection
    • LED indicator for power on
    • Wide range -30°C to +70°C working temperature
    • Can be installed on DIN rail TS-35/7.5 or 15
    • Cooling by free air convection
    More information Compare
  • 120W 2 Stage Desktop Battery Charger

    Features

    • AC input range selected by switch
    • Built-in passive PFC function compliance to EN61000-3-2
    • With AC ON-OFF switch
    • 3 poles AC inlet with fuse holder
    • Short circuit, over load, over voltage, over temperature protections
    • Charger type can be selected (optional)
    • Charger for Lead Acid Batteries
    • 2 colour LED loading indicator
    • Open frame available
    • Low cost, High reliability
    More information Compare
  • 120W 2 Stage Open Frame Battery Charger

    Features

    • AC input range selected by switch
    • Built-in passive PFC function compliance to EN61000-3-2
    • With AC ON-OFF switch
    • 3 poles AC inlet with fuse holder
    • Short circuit, over load, over voltage, over temperature protections
    • Charger type can be selected (optional)
    • Charger for Lead Acid Batteries
    • 2 colour LED loading indicator
    • Enclosed external version available
    • Low cost, High reliability
    More information Compare
  • 120W Pulse Charge Desktop Battery Charger

    Features

    • AC input range selected by switch
    • Built-in passive PFC function compliance to EN61000-3-2
    • With AC ON-OFF switch
    • 3 poles AC inlet with fuse holder
    • Short circuit, over load, over voltage, over temperature protections
    • Charger type can be selected (optional)
    • Charger for Lead Acid Batteries
    • 2 colour LED loading indicator
    • Open frame available
    • Low cost, High reliability
    More information Compare
  • 120W Pulse Charge Open Frame Battery Charger

    Features

    • AC input range selected by switch
    • Built-in passive PFC function compliance to EN61000-3-2
    • With AC ON-OFF switch
    • 3 poles AC inlet with fuse holder
    • Short circuit, over load, over voltage, over temperature protections
    • Charger type can be selected (optional)
    • Charger for Lead Acid Batteries
    • 2 colour LED loading indicator
    • Enclosed external version available
    • Low cost, High reliability
    More information Compare
  • 120W Single Output Battery Charger

    Features

    • 2 Stage charging characteristics
    • Universal AC input/full range
    • Built-in active OFC function, PF>0.97
    • No load power consumption <0.5W
    • 3 pole AC inlet IEC320-C14
    • Class I power (With earth pin)
    • Protections: Short circuit/Overload/Over voltage/Over temperature
    • Cooling by free air convection
    • Full enclosed plastic case
    • 2 colour LED indicator for charging status
    More information Compare
  • 1600W 1U Intelligent Single Output Battery Chargers

    RPB-1600 series is a 1.6KW single output AC/DC charger with a high power density up to 25W/inch. Three 3 embedded charging curves, specifically for the lead-acid batteries, are built into each model; thanks to the communication protocol, PMBus, one spare curve can be further accommodated to fit other types of batteries such as the Li-ion…

    Features

    • Charger for Lead-acid batteries (Gel, flooded and AGM) and Li-ion batteries (lithium iron and lithium manganese)
    • Built-in default 3 stage charging curves and programmable curve
    • Built-in 12C interface, PMBus protocol
    • Universal AC input, Full range (withstand 300VAC surge
    • input for 5 seconds)
    • Built-in active PFC function
    • Forced air Cooling by built-in DC fan
    • Output Voltage and constant current programmable
    • Built-in OR-ing FET
    • Active current sharing up to 4800W (2+1)
    • Protections: Battery under voltage / Battery no connection, Short circuit, Over Voltage , Over temperature
    • Optional conformal coating
    • 5 years warranty
    More information Compare
  • 160W AC/DC Single Output Enclosed Power Supply with UPS Function Battery Charger

    PSC-160-C Series is our standard 160W AC/DC PCB type security power supply, with 6”x3” footprint, but fitted with an l-bracket and cover to encase the unit. The power supply has a universal input range between 90VAC and 264VAC and incorporates a built-in PFC function. In addition to the primary output there is a charger output…

    Features

    • 90-264VAC Universal AC input
    • L-bracket base and cover to enclose
    • Built-in Active PFC function
    • Short circuit, over load, over voltage protections
    • Battery low protection / Battery polarity protection by fuse
    • Relay contact signal output for AC OK and Battery low
    • Cooling by free air convection
    • 100% full load burn-in test
    • 6"x3" compact size
    More information Compare
  • 160W AC/DC Single Output Open Frame Power Supply with UPS Function Battery Charger

    PSC-160 Series is a 160W AC/DC PCB type security power supply with 6”x3” footprint, allowing a universal input range between 90VAS and 264VAC and incorporating a built-in PFC function. In addition to the primary output there is a charger output that provides the backup power supply application required by access and security systems. PSC-160 Series…

    Features

    • 90-264VAC Universal AC input
    • Built-in Active PFC function
    • Short circuit, over load, over voltage protections
    • Battery low protection / Battery polarity protection by fuse
    • Relay contact signal output for AC OK and Battery low
    • Cooling by free air convection
    • 100% full load burn-in test
    • 6"x3" compact size
    More information Compare
  • 180W AC/DC Programmable Desktop Type Battery Charger

    ENC-180 is a single output 180W AC/DC desktop type charger with 3 stage charging curve.

    Features

    • Charger for lead-acid batteries (flooded, Gel and AGM) and li-ion batteries (lithium iron and lithium manganese)
    • Built-in 3 stage programmable charging curve
    • Universal AC input / Full range
    • Built-in active PFC function
    • Fanless design, cooling by free air convection
    • Built-in temperature compensation function
    • Protection: Short circuit / Over voltage / Over temperature / Battery under voltage / Battery over voltage / Battery reverse polarity protection
    • 3 years warranty
    More information Compare
  • 220W AC-DC Single Output 2 Stage Battery Chargers

    GC220 Series are a range of 220W Class I power 2 stage battery chargers with built in active PFC function. Featuring low no load power consumption and high efficiency, up to 93% these battery chargers fulfil the energy saving and environmental requirements of many new builds.

    Features

    • 2 stage charging characteristic
    • Universal AC input / Full range
    • Built-in active PFC function, PF>0.91
    • No load power consumption <1W
    • 3 pole AC inlet IEC320-C14
    • Class I power ( with earth pin)
    • Short circuit, over load, over voltage, over temperature protections
    • Fully enclosed plastic case
    • 2 colour LED indicator for charge status
    • Approvals: UL / CUL / TUV / CB / FCC / CE
    More information Compare
  • 230W Single Output Battery Charger

    Features

    • 3 Stage charging characteristic
    • Universal AC input
    • Built-in active PFC Function
    • Short Circuit, Over Load, Over Voltage Protections
    • Built-in cooling fan ON-OFF control
    • Built-in remote ON-OFF control
    • 2 colour LED loading indicator
    • Low cost, high reliability
    More information Compare

Sunpower have an extensive range of Industrial Battery Chargers capable of delivering a top of the range product for a variety of requirements. These can also be suitable for charging vehicles, including trucks, motorcycles, marine applications and even standard appliances. With Lead-Acid, Gel, Flooded, AGM and Lithium-ion chargers available, Sunpower’s range can suit numerous applications with up to 8000W versions available, and Float 2, 3 and 8 Stage charging solutions.

They all come with Universal Input and up to 10G vibration, allowing for an easy-to-use and stable product. In addition, Sunpower can also offer fully programmable charging curve upon request and parallel functionality throughout the range. Our Industrial Battery Chargers also come with the highest in safety and security, with short circuit, over voltage, overload, over temperature and reverse polarity protection benefits in all models.

The range of Industrial Battery Chargers that Sunpower host include GC30, GC120, GC160, GC220, GC330, PA/PB-120/230, ESC-120/240, ENC-120/180/240/360, PB-300/360/600/1000, HEP-600C, RPB-1600, RCB-1600 Series

Can’t find the industrial battery charger that you’re looking for? By using Sunpower’s advanced search feature, you can directly filter in or out, specific features in order to find the right charger for you. Alternatively, you can use our standard search facility at the top of the page and enter in a product’s name or code to be taken straight to the Industrial Battery Charger that you’re looking for.

For more information on how Sunpower can help, speak to our expert team on 0118 9823746.