Enclosed Power Supply

Showing 1–15 of 301 results

  • 05W Dual Output Encapsulated AC-DC Converter

    1.5A slow blow type external fuse recommended. Free air convection cooling

    Features

    • Switching Power Modules for PCB Mounting
    • Fully Encapsulated Plastic Case
    • Universal Input Range 90-264VAC, 47-440Hz
    • Regulated Output
    • Low Ripple and Noise
    • High Efficiency
    • CE, cUL, TUV Approvals
    More information Compare
  • 05W Single Output Encapsulated AC-DC Converter

    1.5A slow blow type external fuse recommended. Free air convection cooling

    Features

    • Switching Power Modules for PCB Mounting
    • Fully Encapsulated Plastic Case
    • Universal Input Range 90-264VAC, 47-440Hz
    • Regulated Output
    • Low Ripple and Noise
    • High Efficiency
    • CE, cUL, TUV Approvals
    More information Compare
  • 05W Single Output Encapsulated Medical PSU

    Featuring class II isolation levels they can be equiped into non-patient contact medical equipment and still comply with class B as per EMI regulations. With energy saving and the environment in mind the no load power consumption is lower than 0.5W so that it complies with the requirements for “green mode” power supplies. Standard functions…

    Features

    • Universal AC input/full range
    • Ultra low profile
    • Isolation class II
    • No load power consumption <0.5W
    • Short circuit, OLP & OVP
    • UL60601-1 & TUV EN60601-1 medical safety approved
    • Cooling by free air convection
    • Fixed switching frequency at 67KHz
    More information Compare
  • 10000W Enclosed Power Supplies with Parallel Function and PFC

    RST-10000 Series are 10000W single output AC/DC power supplies with wide range 3 phase AC input and output voltage options of 24VDC, 36VDC and 24VDC. RST-10000 have wide range, external control signal, voltage and current adjustment functions and two over load protection mechanisms in the form of continuous constant current limiting mode and constant current…

    Features

    • 3 Phase 3 wire △ AC 196 ~ 305V or 3 Phase 4 wire Y AC 340 ~ 530V wide range input
    • High efficiency up to 91%
    • Built-in active PFC function
    • Short circuit, Over load, Over voltage, Over temperature, Fan fail protections
    • Forced air cooling by built-in DC with fan speed control function
    • Output voltage can be trimmed between 20~110% of the rated output voltage by 1-6VDC external control signal
    • Output current can be adjusted between 20~100% of the rated output current by 1-5VDC external control signal
    • Current sharing up to 2 units
    • Alarm signal output (relay contact and open collector signal): AC fail, DC OK, fan fail, OTP
    • Built-in 12V/0.1A auxiliary output for remote control
    • Built-in remote ON-OFF control
    • Built-in remote sense function
    • 5 years warranty
    More information Compare
  • 1000W AC/DC Industrial Power Supplies with PFC and Parallel Function

    PSPA-1000 series is a 1KW single output enclosed type AC/DC power supply.

    Features

    • Universal AC input / Full range
    •  Built-in active PFC function
    •  Protections: Short circuit / Overload / Over voltage / Over temperature
    •  Forced air cooling by built-in DC fan
    •  Current sharing up to 4000W (3+1)
    •  With DC OK Signal output
    •  Built-in remote ON-OFF control
    •  Built-in remote sense function
    •  5 years warranty
    More information Compare
  • 1000W Modular Power Power Supply

    Switching power supplies with modular design that consists of 2 stages; Front end PFC and output modules. Using zero voltage switching technology to realize the power factor correction, the line input is rectified into high DC voltage by the front end PFC stage, and then the DC output modules will transfer the operating voltage into…

    Features

    • Universal input voltage
    • Uses ZVS technology to reduce power dissipation and improve efficiency
    • Large range of output configurations available
    • Remote control on each module
    • Remote sense on MS-75, 150 & 300 modules
    • Built in active PFC, PF>0.95
    • Built in parallel function on MS-300
    • Fan alarm function
    • Forced air cooling
    More information Compare
  • 1000W PFC Parallel Function Enclosed Power Supply

    With power factor correction and parallel function this series targets 1U low profile and high wattage applications. Featuring 10.67W/in3 extremely high power density RSP-1000 series can provide rated output wattage even at 100VAC input because of its high efficiency design. With built in trimming function the output voltage can be adjusted between 40% and 110%…

    Features

    • Universal AC input
    • 1U low profile
    • High power density 10.67/in3
    • Built in Active PFC circuit
    • Short circuit, over load, over voltage & over temperature protections
    • Built in ON/OFF control and remote sense
    • Trimable output voltages
    • DC OK signal output
    • Built in active current sharing
    • High efficiency up to 90%
    • Built in 5V/0.5A auxiliary output
    More information Compare
  • 1000W Single Output AC/DC PFC Enclosed Power Supply

    SPS-1000P Series are 1000W single output power supplies with high efficency and wide operating temperatures from -20C to +70C. Standard features include remote control, remote sense, power good signal and over voltage, over load, short circuit and over temperature protections. SPS-1000P also has current sharing function for parallel use. UL, cUL, TUV EN60950-1:2006 pending (CB…

    Features

    • Universal AC input with active power factor correction, P.F.>0.95
    • Inrush current limit soft start function
    • Over voltage, over load, short circuit protection
    • Over temperature protection
    • Output voltage ±10% adjustment
    • Output voltage remote sense & remote control ON/OFF
    • Power good signal output
    • Current sharing function, 3+1 up to 4KW
    • Forced air cooling by built in DC fan
    • Built in 5V/0.5A auxiliary output
    • 1U low profile
    • UL, cUL, TUV, CB, CE standard
    More information Compare
  • 100W 1U Single Output Enclosed Power Supplies with PFC Function

    RSP-100 Series extends the RSP range to include a lower 100W of output power, in a 1U low profile 30mm enclosure. These enclosed power supplies feature high efficiency, free air convection cooling and a 1U low profile making them ideal for end users looking for energy saving, noise free and low profile economical power supplies….

    Features

    • Universal full range AC input
    • Built-in active PFC function
    • Short circuit, over load, over voltage, over temperature protections
    • Built-in constant current limiting circuitry
    • Cooling by free air convection
    • 1U low profile 30mm
    • Remote On-Off Control
    • LED indicator for power on
    More information Compare
  • 100W AC/DC Single Output Enclosed Power Supply with UPS Function Battery Charger

    PSC-100C Series is a 100W AC/DC enclosed power supply with additional charger output, designed primarily for the security industry. The product features 90-264VAC Universal AC input voltage, 13.8V and 27.6V output options and short circuit, overload and over voltage protection. PSC-100C Series has been designed with battery low protection, battery polarity protection, via fuse, and…

    Features

    • 90-264VAC Universal AC input
    • <strong>Enclosed within L-Bracket and cover case</strong>
    • Short circuit, overload, over voltage protection
    • Battery low protection / Battery polarity protection by fuse
    • Relay contact signal output for AC OK and Battery low
    • Cooling by free air convection
    More information Compare
  • 100W Dual Isolated Output AC/DC Enclosed Switch Mode Power Supply

    SPS-G100-ID Series is a dual isolated output enclosed power supply range designed with wide operating temperature ranges. These enclosed power supplies comply to EN61000-3-2 Class A and are approved to UL, cUL, CB and TUV EN60950-1:2006.

    Features

    • Output 1 & 2 are isolated
    • Universal full range input
    • Power on with LED indicator
    • Built in EMI filter, low ripple noise
    • Over voltage protection - Shutdown and latch off
    • Over load & short circuit protections - Hiccup mode
    • First output voltage +/-10% adjustable on ID5 & ID6
    • 100% full load burn-in test
    • -20°C ~ +70°C operating temperature
    • UL, cUL, TUV, CB, CE approved
    More information Compare
  • 100W Dual Isolated Output Enclosed Power Supply

    SPS-100P-ID are a range of dual isolated output encolsed power supplies with power factor correction. Featureing wide operating temperatures from -20°C to +70°C and high efficiency up to 83% these enclosed power supplies are highly reliable.

    Features

    • Universal AC input, PFC function
    • Isolated outputs
    • ±10% output voltage adjustment on output 1 of SPS-100P-ID5/ID6 models
    • Built-in EMI filter, low ripple noise
    • Over load, over voltage & short circuit protection
    • 100% full load burn-in test
    • -20°C to +70°C operating temperature
    • Power ON with LED indicator
    • UL, cUL, TUV, CB, CE certified
    More information Compare
  • 100W Dual Output 1 Slot Modular Power Supplies

    The MD100 Series of 100W Dual output 1 SLOT modular power supplies are installed into the following modules for a more bespoke design: MP450 MP650 MP1K0 There are also 75W, 150W, and 300W single output modules to fulfil all kinds of applications up to 14 isolated outputs. There are multiple combinations available for the modular…

    Features

    • For installation in MP450, MP650 & MP1K0 Modules
    More information Compare
  • 100W Dual Output AC/DC Enclosed Switch Mode Power Supply

    SPS-G100-D Series is a dual output enclosed power supply range designed with wide operating temperature ranges. These enclosed power supplies comply to EN61000-3-2 Class A and are approved to UL, cUL, CB and TUV EN60950-1:2006.

    Features

    • Universal full range input
    • Power on with LED indicator
    • Built in EMI filter, low ripple noise
    • Over voltage protection - Shutdown and latch off
    • Over load & short circuit protections - Hiccup mode
    • 100% full load burn-in test
    • -20°C ~ +70°C operating temperature
    • UL, cUL, TUV, CB, CE approved
    More information Compare
  • 100W Dual Output Switching Power Supply

    Features

    • Universal AC input, PFC function (option)
    • Built-in EMI filter, low ripple noise
    • Over load, over voltage & short circuit protection
    • 100% 50° burn-in test
    • UL, cUL, TUV, CB, CE certified
    • Isolated outputs
    More information Compare

An enclosed power supply is typically perceived as the metal cased variety; the benefit of this is to stop components being exposed & in turn providing an extra measure of safety for service personnel of end user systems. Encapsulated power supplies are also included under the enclosed power supply banner on our site as they also protect components and may offer your application the most suitable specifications.

Sunpower’s enclosed power supply range offer flexible OEM power solutions from 5W to 3000W in single, dual, triple and quad outputs; our parallel units have the functionality to take this up to 9000W. Our enclosed power supplies have varied function, including full range input, active power factor correction, low no load power consumption, programmable outputs and even medical safety approval to MOOP levels; the majority of which have short circuit, over load and over voltage protections.

Whether you are looking for a high reliability miniature, PFC, modular, programmable or UPS function; from the encapsulated APC Series to the large Parallel function RSP’s you are sure to find the enclosed power supply you need from Sunpower.