Peripheral Din Rail Power Supplies
Showing 1–15 of 17 results
-
More information Compare12V 20A 2 Input Channel Din Rail 1+1 1+N Redundancy Module
12V 20A 2 Input Channel Din Rail 1+1 1+N Redundancy Module with DC OK alarm signal on both input channels. Suitable for 1+1, 1+N Redundancy applications or for increased reliability single units applied in parallel.
-
More information Compare24~29V 40A Din Rail DC UPS Control Unit
40A max DC UPS (battery control) module, for 24Vdc power system. Accompanied by external batteries (not included), it can back-up up to 40A of current to critical loads for a period of time dependant on the capacity of batteries. With complete monitoring signals and LED indicators for DC BUS OK, Battery Fail, Battery Discharge, and…
-
More information Compare
24V 20A 2 Input Channel Din Rail 1+1 1+N Redundancy Module
24V 20A 2 input channel din rail 1+1 1+N redundancy module
-
More information Compare24V 20A Din Rail Redundant Module
20A redundancy (decoupling) module for 24Vdc power system. Containing 2 sets of 20A Or-ing diodes with wonderful heat dissipation deployment, DR-RDN20 gives you a new option for safe connection of 1+1 redundant set-up. Not only perfectly decoupling power sources from each other but also from the load, DR-RDN-20 also provides users monitoring signals for both…
-
More information Compare28A AC Inrush Current Limiter
28A AC Inrush Current Limiter
Features
- 48A inrush limiting current, 28A continuous
- 180~264VAC AC input
- Integrated bypass relay, no simple NTC
- Internal thermal protection
- Installed on DIN rail TS-35/7.5 or 15 (ICL-28R)
- -30~+70°C wide working temperature
- Over voltage category III
- Operating altitude up to 5000 meters
- 3 years warranty
-
More information Compare
28L AC Inrush Current Limiter
28L AC Inrush Current Limiter
Features
- 48A inrush limiting current, 28A continuous
- 180~264VAC AC input
- Integrated bypass relay, no simple NTC
- Internal thermal protection
- Installed on DIN rail TS-35/7.5 or 15 (ICL-28R)
- -30~+70°C wide working temperature
- Over voltage category III
- Operating altitude up to 5000 meters
- 3 years warranty
-
More information Compare
28R AC Inrush Current Limiter
28R AC Inrush Current Limiter
Features
- 48A inrush limiting current, 28A continuous
- 180~264VAC AC input
- Integrated bypass relay, no simple NTC
- Internal thermal protection
- Installed on DIN rail TS-35/7.5 or 15 (ICL-28R)
- -30~+70°C wide working temperature
- Over voltage category III
- Operating altitude up to 5000 meters
- 3 years warranty
-
More information Compare40.02W 13.8V 1.9A DIN Rail Power Supply with Battery Output
40.02W 13.8V 1.9A DIN Rail Power Supply with Battery Output
-
More information Compare
40.02W 27.6V 0.95A DIN Rail Power Supply with Battery Output
40.02W 27.6V 0.95A DIN Rail Power Supply with Battery Output
-
More information Compare
40A Uninteruptable Power Supply
40A max DC UPS (battery control) module, for 24Vdc power system. Accompanied by external batteries (not included), it can back-up up to 40A of current to critical loads for a period of time dependant on the capacity of batteries. With complete monitoring signals and LED indicators for DC BUS OK, Battery Fail, Battery Discharge, and…
Features
- Battery controller for DIN Rail UPS system
- Parallel connection to DC BUS
- Suitable for 24V system up to 40A
- Can be installed on DIN Rail TS35 / 7.5 or 15
- Built-in battery test function
- Battery polarity protection
- Relay contact signal output and LED indicator for DC BUS OK,Battery OK, and Battery Discharge
- Cooling by free air convection
-
More information Compare
48V 20A 2 Input Channel Din Rail 1+1 1+N Redundancy Module
48V 20A 2 input channel din rail 1+1 1+N redundancy module
-
More information Compare
59.34W 27.6V 1.4A DIN Rail Power Supply with Battery Output
59.34W 27.6V 1.4A DIN Rail Power Supply with Battery Output
-
More information Compare7W KNX to DALI Gateway
KDA-64 connects a digital DALI lighting system to the KNX installation.
Features
- KNX proof gateway
- Easy configuration & installation
- Cost effective solution for smart building
- Connect up to 64 DALI ECGs/Drivers
- Built-in DALI power supply
- LCD 2×12 display
- Lighting control via the button
- Lighting control via the integrated web server
- Up to 16 DALI lighting groups setting
- Up to 16 DALI scenes setting
- 3 year warranty
-
More information Compare
Din Rail Instal Redundant Module
20A redundancy (decoupling) module for 24Vdc power system. Containing 2 sets of 20A Or-ing diodes with wonderful heat dissipation deployment, DR-RDN20 gives you a new option for safe connection of 1+1 redundant set-up. Not only perfectly decoupling power sources from each other but also from the load, DR-RDN-20 also provides users monitoring signals for both…
Features
- Suitable for redundant operation of 24V system
- Installed on DIN Rail TS35 / 7.5 or 15
- Relay contact signal output and LED indicator for input failure alarm
- Cooling by free air convection
-
More information CompareKDA-64 Series KNX to DALI gateway
KDA-64 connects a digital DALI lighting system to the KNX installation.
Features
- KNX proof gateway
- Easy configuration & installation
- Cost effective solution for smart building
- Connect up to 64 DALI ECGs/Drivers
- Built-in DALI power supply
- LCD 2×12 display
- Lighting control via the button
- Lighting control via the integrated web server
- Up to 16 DALI lighting groups setting
- Up to 16 DALI scenes setting
- 3 year warranty
Peripheral Din Rail Power Supplies