Medical Grade Power Supplies

Showing 1–15 of 70 results

  • 05W Single Output Encapsulated Medical PSU

    Featuring class II isolation levels they can be equiped into non-patient contact medical equipment and still comply with class B as per EMI regulations. With energy saving and the environment in mind the no load power consumption is lower than 0.5W so that it complies with the requirements for “green mode” power supplies. Standard functions…

    Features

    • Universal AC input/full range
    • Ultra low profile
    • Isolation class II
    • No load power consumption <0.5W
    • Short circuit, OLP & OVP
    • UL60601-1 & TUV EN60601-1 medical safety approved
    • Cooling by free air convection
    • Fixed switching frequency at 67KHz
    More information Compare
  • 05W Single Output On-board Type Medical PSU

    Featuring class II isolation levels they can be equiped into non-patient contact medical equipment and still comply with class B as per EMI regulations. With energy saving and the environment in mind the no load power consumption is lower than 0.5W so that it complies with the requirements for “green mode” power supplies. Standard functions…

    Features

    • Universal AC input/full range
    • Ultra low profile
    • Isolation class II
    • No load power consumption <0.5W
    • Short circuit, OLP, OVP & OTP
    • Compliance to UL60601-1 & TUV EN60601-1 medical standards
    • Cooling by free air convection
    More information Compare
  • 05W Single Output On-board Type Medical PSU

    Featuring class II isolation levels they can be equiped into non-patient contact medical equipment and still comply with class B as per EMI regulations. With energy saving and the environment in mind the no load power consumption is lower than 0.5W so that it complies with the requirements for “green mode” power supplies. Standard functions…

    Features

    • Universal AC input/full range
    • Ultra low profile
    • Isolation class II
    • No load power consumption <0.5W
    • Short circuit, OLP, OVP & OTP
    • Compliance to UL60601-1 & TUV EN60601-1 medical standards
    • Cooling by free air convection
    More information Compare
  • 05W Single Output On-board Type Medical PSU

    Featuring class II isolation levels they can be equiped into non-patient contact medical equipment and still comply with class B as per EMI regulations. With energy saving and the environment in mind the no load power consumption is lower than 0.5W so that it complies with the requirements for “green mode” power supplies. Standard functions…

    Features

    • Universal AC input/full range
    • Ultra low profile
    • Isolation class II
    • No load power consumption <0.5W
    • Short circuit, OLP, OVP & OTP
    • Compliance to UL60601-1 & TUV EN60601-1 medical standards
    • Cooling by free air convection
    More information Compare
  • 100W Single Output Enclosed Medical Type Power Supply

    The MSP-100 series is a 100W AC-DC highly efficient medical enclosed power supply. Standard features include low leakage current, extremely low no load power consumption, 1U low profile and built in active PFC function. Complying with international safety regulations the power supply is suitable for applications including chemical and biological detection equipment, analysis facilities and…

    Features

    • Universal AC input/Full range
    • Built-in active PFC function
    • High efficiency up to 90%
    • Withstand 300VAC surge input for 5 seconds
    • Protections: Short circuit/Overload/Over voltage
    • protections: Over temperature (Optional)
    • Cooling by free air convection
    • 1U low profile 38mm
    • Medical safety approved (MOOP level)
    • Built-in remote ON-OFF control
    • No load power consumption <0.5W
    More information Compare
  • 10W AC/DC High Reliable Green Medical Encapsulated Type

    MPM-10 is a10W high density and small sizer (45.7×25.4×21.5mm) AC/DC module type medical grade power supply series offered in pin type.

    Features

    • 1.8″x1″ compact size
    • Medical safety approved (2 x MOPP) according to ANSI/AAMI WS60601-1 and IEC/EN60601-1
    • Suitable for BF application with appropriate system consideration
    • NO load power consumption <0.075W
    • Extremely low leakage current
    • Wide operating temp range -30~+85C
    • EMI Class B for Class II configuration
    • Protections: Short circuit/ Overload/ Over voltage/ Over temperature
    • No minimum load required
    • Typical lifetime > 48K hours
    • 3 years warranty
    More information Compare
  • 10W AC/DC High Reliable Green Medical On Board Type

    MFM-10 is a 10W high density and small size (42×22.3×20.5mm) AC/DC on board type medical grade power supply series.

    Features

    • 1.65″x0.88″ compact size
    • Medical safety approved (2XMOPP) according to ANSI/AAMI ES6060-1 and IEC/EN60601-1
    • Suitable for BF application with appropriate system consideration
    • No load power consumption <0.075W
    • Extremely low leakage current
    • Wide operating temperature range -40~+85°C
    • EMI class B for Class II configuration
    • Protections: Short circuit/ Overload/ Over voltage/ Over temperature
    • No minimum load required
    • Typical lifetime >52K hours
    • 3 years warranty
    More information Compare
  • 10W Single Output Encapsulated Medical PSU

    Featuring class II isolation levels they can be equiped into non-patient contact medical equipment and still comply with class B as per EMI regulations. With energy saving and the environment in mind the no load power consumption is lower than 0.5W so that it complies with the requirements for “green mode” power supplies. Standard functions…

    Features

    • Universal AC input/full range
    • Ultra low profile
    • Isolation class II
    • No load power consumption <0.5W
    • Fixed switching frequency at 67KHz
    • Short circuit, over load & over voltage protections
    • UL60601-1, IEC60601-1 & TUV EN60601-1 medical safety approved
    • Cooling by free air convection
    • Fixed switching frequency at 67KHz
    More information Compare
  • 10W Single Output On-board Type Medical PSU

    Featuring class II isolation levels they can be equiped into non-patient contact medical equipment and still comply with class B as per EMI regulations. With energy saving and the environment in mind the no load power consumption is lower than 0.5W so that it complies with the requirements for “green mode” power supplies. Standard functions…

    Features

    • Universal AC input/full range
    • Ultra low profile
    • Isolation class II
    • No load power consumption <0.5W
    • Fixed switching frequency at 67KHz
    • Short circuit, OLP, OVP & OTP
    • Compliance to UL60601-1 & TUV EN60601-1 medical standards
    • Cooling by free air convection
    More information Compare
  • 10W Single Output On-board Type Medical PSU

    Featuring class II isolation levels they can be equiped into non-patient contact medical equipment and still comply with class B as per EMI regulations. With energy saving and the environment in mind the no load power consumption is lower than 0.5W so that it complies with the requirements for “green mode” power supplies. Standard functions…

    Features

    • Universal AC input/full range
    • Ultra low profile
    • Isolation class II
    • No load power consumption <0.5W
    • Fixed switching frequency at 67KHz
    • Short circuit, OLP, OVP & OTP
    • Compliance to UL60601-1 & TUV EN60601-1 medical standards
    • Cooling by free air convection
    More information Compare
  • 10W Single Output On-board Type Medical PSU

    Featuring class II isolation levels they can be equiped into non-patient contact medical equipment and still comply with class B as per EMI regulations. With energy saving and the environment in mind the no load power consumption is lower than 0.5W so that it complies with the requirements for “green mode” power supplies. Standard functions…

    Features

    • Universal AC input/full range
    • Ultra low profile
    • Isolation class II
    • No load power consumption <0.5W
    • Fixed switching frequency at 67KHz
    • Short circuit, OLP, OVP & OTP
    • Compliance to UL60601-1 & TUV EN60601-1 medical standards
    • Cooling by free air convection
    More information Compare
  • 120W Dual Output Open Frame Medical Power Supply

    Features

    • Universal AC input / Full range
    • Low leakage current <180µA
    • Protections:Short circuit/Over load/Over voltage
    • UL60601-1 medical safety approved
    • With power good and fail signal output (Optional)
    • 100% full load burn-in test
    • Fixed switching frequency at 45KHz
    More information Compare
  • 120W Quad Output Open Frame Medical Power Supply

    Features

    • Universal AC input / Full range
    • Low leakage current <180µA
    • Protections:Short circuit/Over load/Over voltage
    • UL60601-1 medical safety approved
    • With power good and fail signal output (Optional)
    • 100% full load burn-in test
    • Fixed switching frequency at 45KHz
    More information Compare
  • 120W Single Output Green Medical Grade Power Supplies

    The RPS-120 series is a 120W highly reliable series of medical grade power supply, available in PCB and enclosed types.

    Features

    • 4″ x 2″ miniature size
    • Universal AC input / Full range
    • Medical safety approved (2 x MOPP between primary to secondary)
    • Suitable for BF application with appropriate system consideration
    • Low Leakage current
    • EMI Class B for both Class I (with FG) and Class II (without FG) configuration
    • No load power consumption <0.3W
    • Protections: Short circuit / Overload / Over voltage/ Over Temperature
    • Cooling by free air convection for 84W and 120W with 10CFM forced air
    • Built-in 12V/0.5A fan supply
    • Operating altitude up to 4000 metres
    • 3 years warranty

    More information Compare
  • 120W Triple Output Open Frame Medical Power Supply

    Features

    • Universal AC input / Full range
    • Low leakage current <180µA
    • Protections:Short circuit/Over load/Over voltage
    • UL60601-1 medical safety approved
    • With power good and fail signal output (Optional)
    • 100% full load burn-in test
    • Fixed switching frequency at 45KHz
    More information Compare

Sunpower’s selection of medical power supply units are versatile products, capable of handling a large range of non-patient/patient connect applications, IT equipment and general electronic use within a medical environment.

This premium range of medical power supply units are available as openframe PCB, enclosed, PCB mount/on board and plugtop/desktop options with a range that starts at 1W and continues through to 600W. They’re also specifically designed with low leakage current and low no load power consumption, protections against short circuit, over voltage and over load issues as standard. Presenting a secure, efficient and safe product at all times.

In addition, all of Sunpower’s medical power supply units come complete with medical industry safety standards and are built to be robust and reliable. Providing a product that is built-to-last and perform at a premium level.

To help you with any specific Medical Power Supply requirements or questions Sunpower’s friendly and expert team will be happy to talk to you to discuss your options. Feel free to call us on 0118 9823746 for further information.