Open Frame Medical Grade Power Supplies
Showing 1–15 of 207 results
-
More information Compare05W Single Output On-board Type Medical PSU
05W Single Output On-board Type Medical PSU
Features
- Universal AC input/full range
- Ultra low profile
- Isolation class II
- No load power consumption <0.5W
- Short circuit, OLP, OVP & OTP
- Compliance to UL60601-1 & TUV EN60601-1 medical standards
- Cooling by free air convection
-
More information Compare05W Single Output On-board Type Medical PSU
Featuring class II isolation levels they can be equiped into non-patient contact medical equipment and still comply with class B as per EMI regulations. With energy saving and the environment in mind the no load power consumption is lower than 0.5W so that it complies with the requirements for “green mode” power supplies. Standard functions…
Features
- Universal AC input/full range
- Ultra low profile
- Isolation class II
- No load power consumption <0.5W
- Short circuit, OLP, OVP & OTP
- Compliance to UL60601-1 & TUV EN60601-1 medical standards
- Cooling by free air convection
-
More information Compare
05W Single Output On-board Type Medical PSU
Featuring class II isolation levels they can be equiped into non-patient contact medical equipment and still comply with class B as per EMI regulations. With energy saving and the environment in mind the no load power consumption is lower than 0.5W so that it complies with the requirements for “green mode” power supplies. Standard functions…
Features
- Universal AC input/full range
- Ultra low profile
- Isolation class II
- No load power consumption <0.5W
- Short circuit, OLP, OVP & OTP
- Compliance to UL60601-1 & TUV EN60601-1 medical standards
- Cooling by free air convection
-
More information Compare10.05W 15V 0.67A Encapsulated Medical Power Supply
10.05W 15V 0.67A Encapsulated Medical Power Supply
Features
- Universal AC input/full range
- Ultra low profile
- Isolation class II
- No load power consumption <0.5W
- Fixed switching frequency at 67KHz
- Short circuit, over load & over voltage protections
- UL60601-1, IEC60601-1 & TUV EN60601-1 medical safety approved
- Cooling by free air convection
- Fixed switching frequency at 67KHz
-
More information Compare10.05W 15V 0.67A On-Board Type Medical PSU
Featuring class II isolation levels they can be equiped into non-patient contact medical equipment and still comply with class B as per EMI regulations. With energy saving and the environment in mind the no load power consumption is lower than 0.5W so that it complies with the requirements for “green mode” power supplies. Standard functions…
-
More information Compare10.08W 24V 0.42A Encapsulated Medical Power Supply
10.08W 24V 0.42A Encapsulated Medical Power Supply
Features
- Universal AC input/full range
- Ultra low profile
- Isolation class II
- No load power consumption <0.5W
- Fixed switching frequency at 67KHz
- Short circuit, over load & over voltage protections
- UL60601-1, IEC60601-1 & TUV EN60601-1 medical safety approved
- Cooling by free air convection
- Fixed switching frequency at 67KHz
-
More information Compare
10.08W 24V 0.42A On-Board Type Medical PSU
Featuring class II isolation levels they can be equiped into non-patient contact medical equipment and still comply with class B as per EMI regulations. With energy saving and the environment in mind the no load power consumption is lower than 0.5W so that it complies with the requirements for “green mode” power supplies. Standard functions…
-
More information Compare
10.2W 12V 0.85A Encapsulated Medical Power Supply
10.2W 12V 0.85A Encapsulated Medical Power Supply
Features
- Universal AC input/full range
- Ultra low profile
- Isolation class II
- No load power consumption <0.5W
- Fixed switching frequency at 67KHz
- Short circuit, over load & over voltage protections
- UL60601-1, IEC60601-1 & TUV EN60601-1 medical safety approved
- Cooling by free air convection
- Fixed switching frequency at 67KHz
-
More information Compare10.2W 12V 0.85A Medical Encapsulated Type Power Supply
MPM-10-12 is a 10.2W 12V 0.85A high density and small sized AC/DC module type medical grade power supply offered in pin type.
Features
- 1.8″x1″ compact size
- Medical safety approved (2 x MOPP) according to ANSI/AAMI WS60601-1 and IEC/EN60601-1
- Suitable for BF application with appropriate system consideration
- NO load power consumption <0.075W
- Extremely low leakage current
- Wide operating temp range -30~+85C
- EMI Class B for Class II configuration
- Protections: Short circuit/ Overload/ Over voltage/ Over temperature
- No minimum load required
- Typical lifetime > 48K hours
- 3 years warranty
-
More information Compare
10.2W 12V 0.85A On-Board Type Medical PSU
Featuring class II isolation levels they can be equiped into non-patient contact medical equipment and still comply with class B as per EMI regulations. With energy saving and the environment in mind the no load power consumption is lower than 0.5W so that it complies with the requirements for “green mode” power supplies. Standard functions…
-
More information Compare
10W 15V 0.67A Medical Encapsulated Type Power Supply
MPM-10-15 is a 10W 15V 0.67A high density and small sized AC/DC module type medical grade power supply offered in pin type.
Features
- 1.8″x1″ compact size
- Medical safety approved (2 x MOPP) according to ANSI/AAMI WS60601-1 and IEC/EN60601-1
- Suitable for BF application with appropriate system consideration
- NO load power consumption <0.075W
- Extremely low leakage current
- Wide operating temp range -30~+85C
- EMI Class B for Class II configuration
- Protections: Short circuit/ Overload/ Over voltage/ Over temperature
- No minimum load required
- Typical lifetime > 48K hours
- 3 years warranty
-
More information Compare
10W 24V 0.42A Medical Encapsulated Type Power Supply
MPM-10-24 is a 10W 24V 0.42A high density and small sized AC/DC module type medical grade power supply offered in pin type.
Features
- 1.8″x1″ compact size
- Medical safety approved (2 x MOPP) according to ANSI/AAMI WS60601-1 and IEC/EN60601-1
- Suitable for BF application with appropriate system consideration
- NO load power consumption <0.075W
- Extremely low leakage current
- Wide operating temp range -30~+85C
- EMI Class B for Class II configuration
- Protections: Short circuit/ Overload/ Over voltage/ Over temperature
- No minimum load required
- Typical lifetime > 48K hours
- 3 years warranty
-
More information Compare
10W 5V 2A Encapsulated Medical Power Supply
10W 5V 2A Encapsulated Medical Power Supply
Features
- Universal AC input/full range
- Ultra low profile
- Isolation class II
- No load power consumption <0.5W
- Fixed switching frequency at 67KHz
- Short circuit, over load & over voltage protections
- UL60601-1, IEC60601-1 & TUV EN60601-1 medical safety approved
- Cooling by free air convection
- Fixed switching frequency at 67KHz
-
More information Compare
10W 5V 2A Medical Encapsulated Type Power Supply
MPM-10-5 is a 10W 5V 2A high density and small sized AC/DC module type medical grade power supply offered in pin type.
Features
- 1.8″x1″ compact size
- Medical safety approved (2 x MOPP) according to ANSI/AAMI WS60601-1 and IEC/EN60601-1
- Suitable for BF application with appropriate system consideration
- NO load power consumption <0.075W
- Extremely low leakage current
- Wide operating temp range -30~+85C
- EMI Class B for Class II configuration
- Protections: Short circuit/ Overload/ Over voltage/ Over temperature
- No minimum load required
- Typical lifetime > 48K hours
- 3 years warranty
-
More information Compare
10W 5V 2A On-Board Type Medical PSU
Featuring class II isolation levels they can be equiped into non-patient contact medical equipment and still comply with class B as per EMI regulations. With energy saving and the environment in mind the no load power consumption is lower than 0.5W so that it complies with the requirements for “green mode” power supplies. Standard functions…
Open Frame Medical Grade Power Supplies