Din Rail Power Supplies

Showing 1–15 of 51 results

  • 100W Miniture DIN Rail Power Supply

    MDR-100 Series is a slim line DIN rail Class I switching power supply. Designed with a fully isolated plastic case to prevent user contact and the risk of shock. Featuring up to 88% efficiency this series can be cooled using only free air convection up to 60°C which significantly increases the reliability and lifetime of…

    Features

    • Universal AC Input
    • Built-in active PFC function, compliance to EN61000-3-2
    • Short circuit, over load, over voltage, over temperature protections
    • Cooling by free air convection
    • Can be installed on DIN rail TS-35/7.5 or 15
    • LED Indicator for power on
    • DC OK Signal
    • No load power consumption <1W
    • NEC Class 2 limited power source (for 24V & 48V only)
    • 100% full load burn-in test
    • ZCS/ZVS technology to reduce power dissipation
    More information Compare
  • 100W Single Output Class II DIN Rail Power Supply

    DR-100 Series is a Class II switching power supply. Designed with a fully isolated plastic case to prevent user contact and the risk of shock. Other standard features include its low no load power consumption, to save energy, short circuit, over load, over voltage and over temperature protections.

    Features

    • Universal AC input
    • Short circuit, over load, over voltage, over temperature protections
    • Cooling by free air convection
    • Can be installed on DIN rail TS-35/7.5 or 15
    • Isolation class II
    • LED indicator for power on
    • No load power consumption<1W
    • 100% full load burn-in test
    More information Compare
  • 100W UPS Function DIN Rail Power Supplies

    DRC-100 Series is designed to meet the high power requirements of the security industry, providing 100W of high-reliability DIN rail power. Designed to be assembled on TS-35/7.5 or TS-35/15 industrial rails inside cabinets DRC-100 series have 90-264VAC input range and offer dual 13.8VDC or 27.6VDC output voltage models, ideal for use with 12V and 24V…

    Features

    • Universal AC Input
    • Alarm signal, via a relay, for AC OK and battery low
    • Battery low protection & battery reverse polarity by fuse
    • Short circuit, overload and over voltage protection
    • LED indicator for power on
    • Wide range -30°C to +70°C working temperature
    • Can be installed on DIN rail TS-35/7.5 or 15
    • Cooling by free air convection
    More information Compare
  • 10W Single Output Industrial Din Rail Power Supply

    MDR-10 Series is a range of 10W Class I, full isolated enclosed plastic case, din rail power supplies. With up to 85% efficiency and free air convention cooling, up to 70C, MDR-10’s reliability and lifetime is significantly increased. Featuring low no load power consumption of <0.75W, short circuit, over load & over voltage protections and…

    Features

    • Universal AC input
    • Short circuit, over load, over voltage protections
    • Cooling by free air convection
    • Can be installed on DIN rail TS-35/7.5 or 15
    • NEC class 2 / LPS compliant
    • Built in DC OK active signal
    • LED indicator for power on
    • No load power consumption <0.75W
    • 100% full load burn-in test
    • <strong>Fixed output voltage</strong>
    More information Compare
  • 120W DC-DC DIN Rail Type Converter

    DDR-120 series is a 120W DIN Rail type DC-DC converter series.

    Features

    • Compliance to EN50155 and EN45545-2 railway standard
    • Width only 32mm
    • 2:1 wide input range
    • -40~+70°C wide working temperature
    • 150% peak load capability
    • DC output adjustable
    • Cooling by free air convection
    • Can be installed on DIN rail TS-35/7.5 or 15
    • Protections: Short circuit / Overload / Over voltage /Input reverse polarity / Input under voltage protection
    • 4KVdc I/O isolation(Reinforced isolation)
    • 3 years warranty
    More information Compare
  • 120W Single Output DIN RAIL Power Supply

    The DR-120 series is an industrial din rail power supply with a selectable AC range. Other standard features include short circuit, overload, over voltage and over temperature protections.

    Features

    • AC input range selectable by switch
    • Installed on DIN rail TS35/7.5 or 15
    • Soft start circuit
    • Limiting AC surge current
    • Short circuit, over voltage, over load, over temperature protections
    • 100% full load burn in
    • LED indication for power on
    • UL508(industrial control equipment) approved
    • Fixed switching frequency at 55KHz
    More information Compare
  • 120W Single Output DIN Rail Power Supply

    The DRH-120 Series is a 120W single output industrial din rail power supply with built-in constant current limiting circuit. Cooling by free air convection allows an operating temperature of -20~+60°C. With a fixed switching frequency at 70KHz enabling designs to avoid interference with system clock frequencies.

    Features

    • Short circuit, over load, over voltage & over temperature protections
    • Cooling by free air convection
    • Built-in constant current limiting circuit
    • Can be installed on DIN rail TS-35/7.5 or 15
    • EN61000-6-2(EN50082-2) industrial immunity level
    • 100% full load burn-in test
    • Fixed switching frequency at 70KHz
    More information Compare
  • 120W Single Output Din Rail Power Supply with PFC Function

    SDR-120 Series are a high efficiency slim din rail power supply range with AC/DC isolation Class I. Capable of providing 120W continuously or peaks of 180W, for 3 seconds, these PFC din rail power supplies are available as 12V, 24V & 48V output models.

    Features

    • High efficiency 91% and low power dissipation
    • 150% peak load capability
    • Built-in active PFC function, PF>0.93
    • Short circuit, over load, over voltage, over temperature protections
    • Cooling by free air convection
    • Can be installed on DIN rail TS-35/7.5 or 15
    • UL 508 (industrial control equipment) approved
    • EN61000-6-2(EN50082-2) industrial immunity level
    • Built-in DC OK relay contac
    • 100% full load burn-in test
    • UL / CUL / TUV / CE / CB / SEMI F47 / GL Approvals
    More information Compare
  • 120W Single Output Industrial Din Rail Power Supplies

    WDR-120 Series are a range of 120W AC/DC slim DIN rail power supplies featuring wide input range for both single and two phase power systems. With up to 92% of high efficiency and capability of providing 120W continuously up to 50℃ using only free air convection. WDR-120 series comply with UL/CB/CE certificates and also meet…

    Features

    • Single and two phase wide input range 180~550VAC
    • High efficiency and low power dissipation
    • Protections: Short circuit / Overload / Over voltage / Over temperature
    • Built-in constant current limiting circuit
    • Cooling by free air convection
    • Can be installed on DIN rail TS-35/7.5 or 15
    • UL 508(industrial control equipment)approved
    • EN61000-6-2(EN50082-2) industrial immunity level
    • Built-in DC OK relay contact
    • 100% full load burn-in test
    More information Compare
  • 15W AC/DC DIN Rail Power Supply

    DR-15 Series is a 12W~15W single output Class II DIN Rail power supply with no load power consumption <0.5W and available in output voltages of 5V, 12V, 15 & 24V. With operating temperatures of -20°C ~ 60°C, cooling by free air convection and capable of being installed on DIN rail TS-35/7.5 or 15 this unit…

    Features

    • Universal AC input/Full range
    • Short circuit, over load, over voltage protections
    • Cooling by free air convection
    • Can be installed on DIN rail TS-35/7.5 or 15
    • Isolation class II
    • LED indicator for power on
    • Operating temperature: -20°C ~ 60°C
    • No load power consumption <0.5W
    • 100% full load burn-in test
    More information Compare
  • 15W DC-DC DIN Rail Type Converter

    DDR-15 series is a 15W DIN Rail type DC-DC converter.

    Features

    • Width only 17.5mm (1SU)
    • 4:1 ultra wide input range
    • -40~+85°C wide working temperature
    • No minimum load required
    • DC output adjustable (+10%)
    • Cooling by free air convection
    • Can be installed on DIN rail TS-35/7.5 or 15
    • Protections: Short circuit/ Overload/ Over voltage / Input reverse polarity/ Input under voltage protection
    • 4KVdc I/O isolation (Reinforced isolation)
    • 3 years warranty
    More information Compare
  • 15W Single Output Slimline Din Rail Power Supplies

    The HDR-15 series is a range of slimline Din Rail power supplies, designed for installation on TS-35/7.5 or TS-35/15 mounting rails. The units offer full range AC input of 85Vac to 264Vac and conforms to EN61000-3-2 European Union harmonic current regulations. With working efficiency up to 85% the HDR-15 series can operate at an ambient…

    Features

    • Ultra slim design with 17.5mm (1SU) width
    • Universal input 85~264VAC (277VAC available)
    • No load power consumption <0.3W
    • Isolation class II
    • Pass LPS (Limited power source)
    • DC output voltage adjustable
    • Short Circuit, overload, over voltage protections
    • DIN rail TS-35/7.5 or 15 mountable
    • Cooling by free air convection (working temperature: -30C to +70C)
    • Led indicator for power on
    • 3 years warranty
    More information Compare
  • 20W Miniture Single Output Din Rail PSU

    MDR-20 Series is a slim line DIN rail 15W to 24W Class I switching power supply. Designed with a fully isolated plastic case to prevent user contact and the risk of shock. Featuring up to 84% efficiency this series can be cooled using only free air convection up to 70°C which significantly increases the reliability…

    Features

    • Universal AC input, full range
    • Short circuit, over load, over voltage protections
    • Cooling by free air convection
    • Can be installed on DIN rail TS-35/7.5 or 15
    • Built in DC OK active signal
    • LED indicator for power on
    • 100% full load burn-in test
    • No load power consumption <0.75W
    More information Compare
  • 240W Single Output DIN RAIL Power Supply

    The DRP-240 series is a 240W single output industrial din rail power supply with pfc function. Cooling by free air convection allows an operating temperature of -10~+70°C and offers protections such as short circuit, overload, over voltage and over temperature. With a fixed switching frequency at 100KHz enabling designs to avoid interference with system clock…

    Features

    • Universal AC input/Full range
    • Built in PFC circuit
    • Installed on DIN rail TS35/7.5 or 15
    • Short circuit, over voltage, over load & over temperature protections
    • Cooling by free air convection
    • 100% full load burn in
    • UL 508(industrial control equipment) approved
    • Fixed switching frequency at 100KHz
    • LED indication for power on
    More information Compare
  • 240W Single Output Industrial Din Rail Power Supplies

    WDR-240 Series are a range of 240W AC/DC slim DIN rail power supplies featuring wide input range for both single and two phase power systems. With up to 91% of high efficiency and capability of providing 240W continuously up to 50℃ using only free air convection. WDR-240 series comply with UL/CB/CE certificates and also meet…

    Features

    • Single and two phase wide input range 180~550VAC
    • High efficiency 91% and low power dissipation
    • Protections: Short circuit / Overload / Over voltage / Over temperature
    • Cooling by free air convection
    • Can be installed on DIN rail TS-35/7.5 or 15
    • UL 508(industrial control equipment)approved
    • EN61000-6-2(EN50082-2) industrial immunity level
    • Built-in DC OK relay contact
    • 100% full load burn-in test
    More information Compare

Sunpower’s DIN rail power supplies range is available in an array of different form factors and power ratings, starting at 10W going up to 960W with output voltages from 5 to 48 volts. All of our DIN rail power supplies are of a fan less design but each individual product has their unique functions and input characteristics, whether it be a wide or high input range, or one, two or three phase operation.

All of our products are installed on DIN rail TS35/7.5 or 15 and the majority of our DIN rail power supply units come with built-in PFC. Other features within our DIN rail power supply units include low no load power consumption, DC OK relay contact and high efficiency. A number of the larger DIN rail power supply units that we stock also have a parallel function so that current sharing can be achieved which allows for installs to be created of up to 3840W with redundancy and UPS modules also available.

Our DIN rail power supplies are designed for use in industrial, automation and process control applications and meet the requirements of UL508, for industrial control equipment and will provide the power solution to meet your necessary requirements.

To help you with any specific DIN Rail Power Supply requirements or questions Sunpower’s friendly and expert team will be happy to talk to you to discuss your options. Feel free to call us on 0118 9823746 for further information.