PCB Mount Power Supplies
Showing 1–15 of 33 results
-
More information Compare05W Dual Output Encapsulated AC-DC Converter
1.5A slow blow type external fuse recommended. Free air convection cooling
Features
- Switching Power Modules for PCB Mounting
- Fully Encapsulated Plastic Case
- Universal Input Range 90-264VAC, 47-440Hz
- Regulated Output
- Low Ripple and Noise
- High Efficiency
- CE, cUL, TUV Approvals
-
More information Compare
05W Single Output Encapsulated AC-DC Converter
1.5A slow blow type external fuse recommended. Free air convection cooling
Features
- Switching Power Modules for PCB Mounting
- Fully Encapsulated Plastic Case
- Universal Input Range 90-264VAC, 47-440Hz
- Regulated Output
- Low Ripple and Noise
- High Efficiency
- CE, cUL, TUV Approvals
-
More information Compare05W Single Output On-board Type Medical PSU
Featuring class II isolation levels they can be equiped into non-patient contact medical equipment and still comply with class B as per EMI regulations. With energy saving and the environment in mind the no load power consumption is lower than 0.5W so that it complies with the requirements for “green mode” power supplies. Standard functions…
Features
- Universal AC input/full range
- Ultra low profile
- Isolation class II
- No load power consumption <0.5W
- Short circuit, OLP, OVP & OTP
- Compliance to UL60601-1 & TUV EN60601-1 medical standards
- Cooling by free air convection
-
More information Compare10W Dual Output Encapsulated PCB Power Supply
1.5A slow blow type external fuse recommended. Free air convection cooling
Features
- Switching Power Modules for PCB Mounting
- Fully Encapsulated Plastic Case
- Universal Input Range 90-264VAC, 47-440Hz
- Regulated Output
- Low Ripple and Noise
- High Efficiency
- CE, cUL, TUV Approvals
-
More information Compare10W Single Output AC/DC PCB Mount Power Supplies
IRM-10 Series are a range of 5W 85-264VAC full range input AC/DC encapsulated PCB mount power supplies offering 3.3VDC to 24VDC output options. The reduced size of these units makes them the ideal solution for applications with limited PCB space, other features include short circuit, over load and over voltage protections, up to 85% of…
Features
- Universal AC input
- No load power consumption <0.1W
- Compact size
- Short circuit, over load and over voltage protections
- Isolation class II
- Withstand 5G vibration test
- High reliability
- Cooling by free air convection
-
More information Compare10W Single Output Encapsulated PCB Mount PSU
Features
- Switchmode power module
- Fully encapsulated plastic case
- Universal input range 90-264VAC, 47-440Hz
- Regulated Output
- Low Ripple and Noise
- High efficiency
- CE, CB, cUL, TUV Approvals
-
More information Compare
10W Single Output Encapsulated PCB Power Supply
1.5A slow blow type external fuse recommended. Free air convection cooling
Features
- Switching Power Modules for PCB Mounting
- Fully Encapsulated Plastic Case
- Universal Input Range 90-264VAC, 47-440Hz
- Regulated Output
- Low Ripple and Noise
- High Efficiency
- CE, cUL, TUV Approvals
-
More information Compare10W Single Output On-board Type Medical PSU
Featuring class II isolation levels they can be equiped into non-patient contact medical equipment and still comply with class B as per EMI regulations. With energy saving and the environment in mind the no load power consumption is lower than 0.5W so that it complies with the requirements for “green mode” power supplies. Standard functions…
Features
- Universal AC input/full range
- Ultra low profile
- Isolation class II
- No load power consumption <0.5W
- Fixed switching frequency at 67KHz
- Short circuit, OLP, OVP & OTP
- Compliance to UL60601-1 & TUV EN60601-1 medical standards
- Cooling by free air convection
-
More information Compare120W Single Output Green Medical Grade Power Supplies
The RPS-120 series is a 120W highly reliable series of medical grade power supply, available in PCB and enclosed types.
Features
• 4″ x 2″ miniature size
• Universal AC input / Full range
• Medical safety approved (2 x MOPP between primary to secondary)
• Suitable for BF application with appropriate system consideration
• Low Leakage current
• EMI Class B for both Class I (with FG) and Class II (without FG) configuration
• No load power consumption <0.3W
• Protections: Short circuit / Overload / Over voltage/ Over Temperature
• Cooling by free air convection for 84W and 120W with 10CFM forced air
• Built-in 12V/0.5A fan supply
• Operating altitude up to 4000 metres
• 3 years warranty -
More information Compare15W Dual Output Encapsulated PCB Power Supply
1.5A slow blow type external fuse recommended. Free air convection cooling
Features
- Switching Power Modules for PCB Mounting
- Fully Encapsulated Plastic Case
- Universal Input Range 90-264VAC, 47-440 Hz
- Regulated Output
- Low Ripple and Noise
- High Efficiency
- CE, cUL, TUV Approvals
-
More information Compare15W Single Output 18-36VDC Input Regulated DC-DC Converter
SKM15B Series are a range of single output DC-DC converters with 18-36VDC input voltage range. The products feature built-in remote ON/OFF control, ±10% trimming output, EMI filter and 1500VDC I/O isolation. Other standard features include free air convection cooling, high efficiency up to 88% and short circuit, over load and over voltage protections. SKM15B Series…
Features
- 18-36VDC Input voltage
- 1" x 1" compact size
- 2:1 wide input range
- High efficiency up to 88%
- 1500VDC I/O isolation
- Built-in remote ON/OFF control
- Built-in trimming output( 10%)
- Built-in EMI filter
- Short circuit, overload, over voltage protections
- Cooling by free air convection
- Six-sided shield metal case
- 100% burn-in test
- Low cost / High reliability
- FCC & CE approvals
-
More information Compare
15W Single Output 36-75VDC Input Regulated DC-DC Converter
SKM15C Series are a range of single output DC-DC converters with 36-75VDC input voltage range. The products feature built-in remote ON/OFF control, ±10% trimming output, EMI filter and 1500VDC I/O isolation. Other standard features include free air convection cooling, high efficiency up to 88% and short circuit, over load and over voltage protections. SKM15C Series…
Features
- 36-75VDC Input voltage
- 1" x 1" compact size
- 2:1 wide input range
- High efficiency up to 88%
- 1500VDC I/O isolation
- Built-in remote ON/OFF control
- Built-in trimming output( 10%)
- Built-in EMI filter
- Short circuit, over load, over voltage protections
- Cooling by free air convection
- Six-sided shield metal case
- 100% burn-in test
- Low cost / High reliability
- Approvals: FCC / CE
-
More information Compare
15W Single Output 9-18VDC Input Regulated DC-DC Converter
SKM15B Series are a range of single output DC-DC converters with 18-36VDC input voltage range. The products feature built-in remote ON/OFF control, ±10% trimming output, EMI filter and 1500VDC I/O isolation. Other standard features include free air convection cooling, high efficiency up to 88% and short circuit, over load and over voltage protections. SKM15B Series…
Features
- 18-36VDC Input voltage
- 2:1 wide input range
- Built-in remote ON/OFF control
- ±10% trimming output
- High efficiency up to 88%
- Built-in EMI filter
- Short circuit, over load and over voltage protections
-
More information Compare
15W Single Output AC/DC PCB Mount Power Supplies
IRM-10 Series are a range of 5W 85-264VAC full range input AC/DC encapsulated PCB mount power supplies offering 3.3VDC to 24VDC output options. The reduced size of these units makes them the ideal solution for applications with limited PCB space, other features include short circuit, over load and over voltage protections, up to 85% of…
Features
- Universal AC input
- No load power consumption <0.1W
- Compact size
- Short circuit, over load and over voltage protections
- Isolation class II
- Withstand 5G vibration test
- High reliability
- Cooling by free air convection
-
More information Compare15W Single Output Encapsulated Medical PSU
Featuring class II isolation levels they can be equiped into non-patient contact medical equipment and still comply with class B as per EMI regulations. With energy saving and the environment in mind the no load power consumption is lower than 0.5W so that it complies with the requirements for “green mode” power supplies. Standard functions…
Features
- Universal AC input/full range
- Ultra low profile
- Isolation class II
- No load power consumption <0.5W
- Short circuit, OLP & OVP
- UL60601-1 & TUV EN60601-1 medical safety approved
- Cooling by free air convection
- Fixed switching frequency at 67KHz
Sunpower’s range of PCB mount/on board power supply products come in single, dual and triple outputs with power levels from 1W to 150W and output voltages ranging from 3.3V to 24V. The variety of models available can cater for a range of different applications from audio, communications and domestic to general medical and full industrial usage with safety approvals to suit.
Our PCB mount power supplies are also specifically designed in both encapsulated and open frame versions, with high power densities, making them perfect for saving space and low profile applications.
The encapsulated PCB mount power supplies require no heat sinking or external components for filtering and EMC. They’re also ideal for applications susceptible to vibration or those requiring protection from dust and foreign objects.
There are a number of standard features that will appear in every PCB power mount supply product within the Sunpower range including input voltages of 90-305Vac, low no load power consumption and industrial or medical safety approvals.
Sunpower’s PCB mount power supplies offers features including a led indicator, adjustable output voltage, low no load power consumption and protection against overload, short circuit and over voltage to name a few.
To help you with any specific requirements or questions Sunpower’s friendly and expert team will be happy to talk to you to discuss your options. Feel free to call us on 0118 9823746 for further information.