NSD10-12S3 - 8.25W 3.3V 25A DC/DC Converter
Home > Products >DC-DC Converters > NSD10-S Series 10W DC-DC Single Output Regulated Converter > 8.25W 3.3V 25A DC/DC Converter
|
Features- Wide 4:1 DC input range
- Short circuit, over load, over voltage protections
- 1500VDC I/O isolation
- Built-in EMI filter
- Cooling by free air convection
- Built-in remote ON-OFF control
- 100% full load burn-in test
- High reliability
Standards
Case Details
25.4 x 50.8 x 10mm
|
General Specifications
|
|
| Ripple & Noise |
75mV |
| Output Voltage Tolerance |
±2.0% max. |
| Line Regulation |
±1.0% |
| Shutdown Idle Current |
20mA / 12Vdc |
| Over Load Protection |
Above 105% rated output power |
|
Over power limiting, recovers automatically after fault condition is removed |
| Short Circuit Protection |
Recovers automatically after fault condition is removed |
| On/Off Control |
Logic 1 OPEN: ON Logic 0 GND: OFF |
| Working Temperature |
-25°C to +70°C |
| Working Humidity |
0% ~ 95% RH Max |
| Storage Temperature, Humidity |
-40°C to +85°C, 0~95%RH |
| Temperature Coefficient |
±0.03%/°C (0~60°C) |
| Isolation Voltage |
I/P-O/P: 1.5KVDC |
| Isolation Resistance |
I/P-O/P: 100M Ohms/500VDC 25°C 70% RH |
| Safety Standards |
Design refers to UL60950-1,TUV EN60950-1 |
| EMC |
Compliance to EN55022 (CISPR22) Class B, EN61000-4-2,3,4,6,8; |
|
EN55024, Light industry level, criteria A |
| MTBF |
2138.2K hrs min. MIL-HDBK-217F (25°C) |
|
NSD10-12S3 Input & Output Data
|
Rated DC Input
|
Input Range
|
Input Current
|
Output Voltage
|
Rated Output Current
|
Current Range
|
Rated Power
|
Load Reg.
|
Eff.
|
OVP
|
|
12Vdc
|
9.8 ~ 36Vdc
|
1.4A/12Vdc
|
3.3Vdc
|
2.5A
|
0.12 ~ 2.5A
|
8.25W
|
±2.0%
|
72%
|
3.8 ~ 4.95V
|
|
 (228KB)
|
| Add this product to your ClipBook |
.jpg)
