AFC Series - 10W Single Output Encapsulated PCB Mount PSU
Home > Products >PCB Mount Power Supplies > 10W Single Output Encapsulated PCB Mount PSU
Features- Switchmode power module
- Fully encapsulated plastic case
- Universal input range 90-264VAC, 47-440Hz
- Regulated Output
- Low Ripple and Noise
- High efficiency
- CE, CB, cUL, TUV Approvals
|
Standards
  
|
.jpg)
Case Details
52.4 x 27.2 x 23.5mm
|
Specification
| Input Voltage |
90 to 264Vac |
| Input Frequency |
47-440Hz |
| Input Current |
220mA max. at 115Vac |
|
150mA max. at 230Vac |
| Inrush Current (<2ms) |
10A max. at 115Vac |
|
20A max. at 230Vac |
| Leakage Current |
0.25mA max. |
| Output Voltage Accuracy |
±2% |
| Line Regulation |
±0.3% |
| Load Regulation |
±0.5% |
| Minimum Load |
0% |
| Maximum Capacitive Load |
470-23,000uF depending on model |
| Ripple |
<0.2% Vout +40mV max. |
| Noise |
<0.5% Vout +50mV max. |
| Hold-up Time |
15mS min. |
| Switching Frequency |
125kHz |
| Over Power Protection |
Hiccup technique, auto recovery |
| Over Voltage Protection |
Zener diode clamp |
| Short Circuit Protection |
Hiccup mode, indefinite (automatic recovery) |
| Input-Output Isolation |
3000V |
| Operating Temperature |
-25°C to +70°C, see derating curve |
| Storage Temperature |
-40°C to +85°C |
| Temperature Coefficient |
±0.02%/°C |
| Humidity |
20 to 85% RH |
| MTBF |
>330,000h @ 25°C (MIL-HDBK-217F) |
| Cooling |
Free air convection |
| Vibration |
10-55Hz 0.5mm width/ 1 minute cycle |
| Shock |
20 G (3 directions each 3 times) |
| Agency Approvals |
UL/cUL, CE, CB |
| EMC |
EN 55022 Class B, EN 55024 |
| Case Material |
Plastic resin with fiberglass (flamibility to UL 94V-0) |
|
Items
AFC Series Output Data
|
 (378KB)
|
