960W
Showing all 7 results
-
24V 40A 960W Three Phase DIN RAIL with PFC Function
24V 40A 960W Three Phase DIN RAIL with PFC Function
-
24V 40A 960W Ultra Slim DIN Rail Power Supply
24V 40A 960W Ultra Slim DIN Rail Power Supply
-
48V 20A 960W Three Phase DIN RAIL with PFC Function
48V 20A 960W Three Phase DIN RAIL with PFC Function
-
48V 20A 960W Ultra Slim DIN Rail Power Supply
48V 20A 960W Ultra Slim DIN Rail Power Supply
-
960W Three Phase AC-DC Industrial DIN Rail PSU
960W Three Phase AC-DC Industrial DIN Rail PSU
Features
- Three-Phase AC 340 ~ 550V wide range input
- High efficiency 91% and low dissipation
- Short circuit/Over load/Over voltage/Over temperature protection
- Optional parallel function(1+1)
- Cooling by free air convection
- Can be installed on DIN rail TS-35/7.5 or 15
- UL 508(industrial control equipment)approved
- EN61000-6-2(EN50082-2) industrial immunity level
- 100% full load burn-in test
-
960W Three Phase DIN RAIL with PFC Function
960W Three Phase DIN RAIL with PFC Function
Features
- Three-phase AC 340-550V wide range input (Dual phase operation possible)
- Width only 110mm
- Built-in active PFC function compliance to EN61000-3-2
- High efficiency 94.5% and low power dissipation
- Protections: Short circuit/Overload/Over voltage/Over temperature
- Cooling by free air convection
- Built-in constant current limiting circuit
- Can be installed on DIN rail TS-35/7.5 or 15
- UL508 (Industrial control equipment) approved
- EN61000-6-2 (EN50082-2) industrial immunity level
- Current sharing up to 3840W (3+1)
- Built-in DC OK relay contact
- 100% full load burn-in test
-
960W Ultra Slim DIN Rail Power Supply
960W Ultra Slim DIN Rail Power Supply
Features
- AC Input 180~264VAC
- 130% peak load capacity
- Width only 110mm
- Built-in active PFC function compliance to EN61000-3-2
- High efficiency 94% and low power dissipation
- Protections: Short circuit/Overload/Over voltage/Over temperature
- Cooling by free air convection
- Built-in constant current limiting circuit
- Can be installed on DIN rail TS-35-7.5 or 15
- UL508 (Industrial control equipment) approved
- EN61000-6-2 (EN50082-2) industrial immunity level
- Current sharing up to 3840W (3+1)
- Built in DC OK relay contact
- 100% full load burn-in test