DC-DC Converters
Showing 196–210 of 1193 results
-
150W 96V Input 12V 12.5A Output DC-DC Converter
150W 96V Input 12V 12.5A Output DC-DC Converter
-
150W DC-DC Half-Brick Regulated Single Output Converter
150W DC-DC Half-Brick Regulated Single Output Converter
Features
- Half-Brick size (2.28″ x 2.4″ x 0.5″) with industry standard pin out
- 2:1 wide input range
- Protections: Short circuit/Over Current/Over Voltage/Over Temperature
- High efficiency up to 89%
- 1500VDC I/O isolation
- Built-in remote ON/OFF control
- Built-in remote sense function
- Trimming output ±10%
- Five-sided shield metal case
- Optional heat sinks for extended operating temperature
- Output 2.5V/3.3V/15V available
- Approval: UL/CUL
-
150W Railway Single Output DC-DC Converter
The RSD-150 series is an enclosed type DC-DC converter; with a wide input range of -40~+70°C, protections for short circuit, overload, output over voltage and input reverse polarity. Designed to withstand harsh environments of high temperatures, high dust and high moisture and complying with EN55015 this unit is suitable for railway applications.
Features
- 2:1 wide input range
- Protections: Short circuit/Overload/Over voltage/Over temperature/Input reverse polarity
- 4000VDC I/O isolation
- Cooling by free air convection
- Built-in constant current limiting circuit
- 1U low profile 36mm
- Compliance to EN50155 railway standard
- All using 105°C long life electrolytic capacitors
- LED indicator for power on
- 100% full load burn-in test
-
150W Single Output DC-DC Converter
150W Single Output DC-DC Converter
Features
- 2:1 wide input range
- Short circuit, over load, over voltage protections
- 1500VDC I/O isolation
- Built in EMI filter, low ripple noise
- 100% full load burn-in test
- Design refers to LVD
- Low cost, high reliability
-
150W Single Output DC-DC Converter
150W Single Output DC-DC Converter
Features
- 2:1 wide input range
- Protections:Short circuit/Over load/Over voltage
- 1500VDC I/O isolation
- Built in EMI filter, low ripple noise
- 100% full load burn-in test
- Design refers to LVD
- Low cost, high reliability
-
150W Single Output DC-DC Converter
150W Single Output DC-DC Converter
Features
- 2:1 wide input range
- Short circuit, over load, over voltage protections
- 1500VDC I/O isolation
- Built in EMI filter, low ripple noise
- 100% full load burn-in test
- Low cost, high reliability
-
150W Single Output Enclosed DC-DC Converter
Features
- Soft start function, low Inrush current
- Input over voltage and under voltage protection
- Input polarity reverse protection
- Remote control ON/OFF (optional)
- Over load, over voltage & short circuit protection
- Over temperature protection (optional)
- Non min. load requirement
- Output voltage ±10% adjustment
- 100% 50° burn-in test
- Meet UL, cUL, TUV, CB, CE standard
-
150W Single Output Enclosed DC-DC Converter
Features
- Soft start function, low Inrush current
- Input over voltage and under voltage protection
- Input polarity reverse protection
- Remote control ON/OFF (optional)
- Over load, over voltage & short circuit protection
- Over temperature protection (optional)
- Non min. load requirement
- Output voltage ±10% adjustment
- 100% 50° burn-in test
- Meet UL, cUL, TUV, CB, CE standard
-
150W Single Output Enclosed DC-DC Converter
Features
- Soft start function, low Inrush current
- Input over voltage and under voltage protection
- Input polarity reverse protection
- Remote control ON/OFF (optional)
- Over load, over voltage & short circuit protection
- Over temperature protection (optional)
- Non min. load requirement
- Output voltage ±10% adjustment
- 100% 50° burn-in test
- Meet UL, cUL, TUV, CB, CE standard
Typically used in portable electronic devices, DC-DC converters are able to convert a source of direct current from one voltage to another. Suitable for installation in a variety of commercial, industrial and domestic applications, DC-DC converters are often used for electrical engineering, automotive applications, IT equipment, security and transportation. DC-DC converters can also be used as an important component in battery backup systems as they’re able to regulate DC voltages from variable source (such as a battery).
With Sunpower’s extensive range of DC-DC converters, you can be sure you’ll find the right one for your needs. Starting at 1W, our variety of DC DC converters goes through to 1000W. Available as encapsulated, PCB mount/on board, openframe PCB or enclosed modules, the range also includes converters with wide DC input ranges.
DC DC converters come with a range of standard functions including remote ON/OFF control, I/O isolation, built-in EMI filters and active surge current limiting as well as safety measures such as short circuit, over/under voltage, overload and input polarity reverse protection. A number of our models also come with compliance to EN50155 railway certification that ensures a reliable performance required for electronic railway equipment and the challenges associated with these environments.
To help you with any specific DC-DC Converter requirements or questions Sunpower’s friendly and expert team will be happy to talk to you to discuss your options. Feel free to call us on 0118 9823746 for further information.