| Input Voltage |
90 ~ 265Vac |
| Input Frequency |
47 ~ 63Hz |
| Input Current |
8A/115Vac; 4A/230Vac |
| Power Factor Correction |
>0.95 at full load |
| Inrush Current |
50A/115Vac; 100A/230Vac, cold start |
| Output Power |
360W |
| Peak Output Power |
380W maximum |
| Overshoot |
<10% of nominal voltage |
| Efficiency |
>80% under 20%, 50% & 100% load; at nominal voltage of 115Vac or 230Vac |
| Remote On/Off Control |
LL PS-ON low outputs are enabled |
|
LL high or open outputs are disabled |
| Over Power Protection |
At 110%~150% output power, shutdown and latch off |
| Over Voltage Protection |
Should the unit go into OVP it shall latch off. |
| Under Voltage Portection |
Should the unit go into UVP it shall latch off. |
| Over Current Protection |
+5V, +12V1, +12V2 & +3.3V have seperate OCP circuits to meet 240VA safety requirements |
| Short Circuit Protection |
Short to +3.3V, +5V or +12V rail; shut down and latch off |
|
Short to negative rail; fold back |
|
Short to +5Vsb; once fault removed auto recover |
| Over Temperature Protection |
No damage shall occur to the power supply |
| Rise Time |
0.1 ~ 20mS |
| Power Good |
turn on delay time 100 ~ 500mS |
|
turn off delay time 1mS min. |
| Rise Time |
10mS max. |
| Hold Up Time |
16mS at nominal input |
|
|
| Operating Temperature |
0°C to 50°C |
| Operating Humidity |
20 to 85% non-condensing |
| Storage Temperature, Humidity |
-40°C to +70°C; 5 to 90% non-condensing |
| Safety Standards |
Designed to meet UL 1950, TUV |
| EMC |
EN61000-4-2, EN61000-4-4, EN61000-4-5, |
|
EN61000-4-8, EN61000-4-11, EN61000-4-3, EN61000-4-6, |
|
EN61000-3-3, EN61000-3-2, EN 55022 |
|
FCC Part 15, Subpart J Class B |
| MTBF |
100,000 hrs, MIL-STD-217D/E |
.jpg)
.jpg)
