We offer a range of 6V and 12V Sealed Lead Acid (SLA) battery chargers that provide intelligent and automatic charge functions as two stage Three stage, dual stage and constant voltage options.
Battery Chargers suitable for charging vehicles ranging from motor cycles to trucks, marine applications, leisure vehicles such as caravans and household appliances.
| Product Code |
|
Features |
| ESC-240 Series |
 |
216W Desktop SLA Battery Charger - AC input range selected by switch
- Protections:Short circuit/over load/over voltage/over temperature
- Battery under/over voltage and polarity protection
- Forced air cooling by built-in DC fan
- Fixed switching frequency at 25KHz
- 3 colour LED loading indicator
|
| BCA120-350 |
 |
4.2VA 12V 350mA Constant Voltage SLA Battery Charger - Regulated constant voltage
- 230VAC/50Hz input
- Over voltage protection
- Over current protection
- Short circuit protection
- Suitable for 1.3-3.5Ah batteries
|
| BCA12-2 |
 |
12V Constant Voltage SLA Battery Charger - Regulated constant voltage
- Limited current
- Desk top black NORYL SE1 case
- Casing shock-proof & double insulated and protected IP20
- Cover closed by 4 screws special head
- LED Display
- Diode in output to avoid battery discharge, in case of mains failure.
|
| BCAD12-4-U |
 |
12V 4A Car Battery Charger - Regulated Constant Voltage
- Automatic Switching From Cycling To Floating
- ABS Shock-Proof Type BC8 Case
- Double Insulation
|
| ESC-120 Series |
 |
108W Desktop SLA Battery Charger - AC input range selected by switch
- Short circuit, over load, over voltage, over temperature protection
- Battery under/over voltage and polarity protection
- Fixed switching frequency at 25KHz
- 3 colour LED loading indicator
|
| PB-120 C Series |
.jpg) |
120W 2 Stage Desktop Battery Charger - AC input range selected by switch
- Built-in passive PFC function compliance to EN61000-3-2
- With AC ON-OFF switch
- 3 poles AC inlet with fuse holder
- Short circuit, over load, over voltage, over temperature protections
- Charger type can be selected (optional)
- Charger for Lead Acid Batteries
- 2 colour LED loading indicator
- Open frame available
- Low cost, High reliability
|
| PB-120 P Series |
.jpg) |
120W 2 Stage Open Frame Battery Charger - AC input range selected by switch
- Built-in passive PFC function compliance to EN61000-3-2
- With AC ON-OFF switch
- 3 poles AC inlet with fuse holder
- Short circuit, over load, over voltage, over temperature protections
- Charger type can be selected (optional)
- Charger for Lead Acid Batteries
- 2 colour LED loading indicator
- Enclosed external version available
- Low cost, High reliability
|
| PA-120 C Series |
.jpg) |
120W Pulse Charge Desktop Battery Charger - AC input range selected by switch
- Built-in passive PFC function compliance to EN61000-3-2
- With AC ON-OFF switch
- 3 poles AC inlet with fuse holder
- Short circuit, over load, over voltage, over temperature protections
- Charger type can be selected (optional)
- Charger for Lead Acid Batteries
- 2 colour LED loading indicator
- Open frame available
- Low cost, High reliability
|
| PA-120 P Series |
.jpg) |
120W Pulse Charge Open Frame Battery Charger - AC input range selected by switch
- Built-in passive PFC function compliance to EN61000-3-2
- With AC ON-OFF switch
- 3 poles AC inlet with fuse holder
- Short circuit, over load, over voltage, over temperature protections
- Charger type can be selected (optional)
- Charger for Lead Acid Batteries
- 2 colour LED loading indicator
- Enclosed external version available
- Low cost, High reliability
|
| GC220 Series |
 |
220W AC-DC Single Output 2 Stage Battery ChargersNew Product - 2 stage charging characteristic
- Universal AC input / Full range
- Built-in active PFC function, PF>0.91
- No load power consumption <1W
- 3 pole AC inlet IEC320-C14
- Class I power ( with earth pin)
- Short circuit, over load, over voltage, over temperature protections
- Fully enclosed plastic case
- 2 colour LED indicator for charge status
- Approvals: UL / CUL / TUV / CB / FCC / CE
|
| PB-300P Series |
.jpg) |
300W PFC Single Output Battery Charger - 3 stage charging
- AC 115/230VAC selected by switch
- Built-in passive PFC function compliance to EN61000-3-2 Class A (option)
- Protection:Reverse Polarity/Short circuit/Over voltage/Over temperature
- Cooling by free air convection
- Charger for lead-acid batteries
- 2 color LED loading indicator
- Low cost, High reliability
|
| PB-360P Series |
 |
360W PFC Single Output Battery Charger - 3 stage charging
- AC 115/230VAC selected by switch
- Built-in passive PFC function to EN61000-3-2 Class A
- Reverse Polarity/Short circuit/Over voltage/Over temperature protection
- Fan on/off control (depends on charging current)
- 2 color LED loading indicator
- High reliability
|
| PB-600 Series |
 |
600W Intelligent Single Output Battery ChargerNew Product - Microprocessor controlled power management
- 2/8 stage charging selectable on output panel
- Universal AC input / Full range
- Built-in active PFC function PF>0.95
- Reverse polarity, short circuit, over voltage, over temperature protections
- Charger for lead-acid batteries
- 3 color LED loading indicator
- Built-in remote ON-OFF control
- Built-in fan speed control(Depends on charging current)
|
| PB-1000 Series |
 |
1000W Intelligent Single Output Battery Charger - Controlled by microprocessor
- 2/8 stage charging selectable on output panel
- Universal AC input / Full range
- Built-in active PFC function PF>0.95
- Reverse polarity, short circuit, over voltage, over temperature protections
- Charger for lead-acid batteries
- 3 color LED loading indicator
- Built-in remote ON-OFF control
- 2-Bank charger
- Temperature compensation function
- FAN on/off control(Depends on charging current)
|
|
Found 14 products Displaying 1 to 14 |