Din Rail Power Supplies
Showing 121–135 of 219 results
-
480W 48V 10A PFC Function Din Rail Power Supply
The DRP-480 series is a 480W single output din rail power supply with a high efficiency of 89%. Built to be mounted on a din rail TS-35/7.5 or 15 and approved to UL508; industrial control equipment. With built-in passive PFC function compliance to EN61000-3-2 and protections including short circuit, overload and over temperature.
-
480W 48V 10A Single Output Industrial Din Rail Power Supply with PFC and Parallel Function
480W 48V 10A Single Output Industrial Din Rail Power Supply with PFC and Parallel Function
-
480W 48V 10A Three Phase Input Din Rail PSU
The DRT-480 series is a three-phase industrial din rail power supply; with a wide input range of 340~550VAC. The power supply can be installed on a Din rail mounting plate; TS-35/7.5 or 15. Including protections of short circuit, overload, over voltage and over temperature.
-
480W 48V 10A Wide Input Range Industrial Din Rail Power Supply
480W 48V 10A Wide Input Range Industrial Din Rail Power Supply
-
480W 48V 5A Three Phase Input Din Rail PSU
The DRT-240 series is a 240W three phase industrail din rail power supply. With a wide input range of 340~550VAC, high efficiency over 89% and protections including short circuit and over temperature. The series can be installed on a mounting plate; TS-35-7.5 or 15 and is approved to UL508.
-
480W Single Output DIN RAIL Power Supply
480W Single Output DIN RAIL Power Supply
Features
- Built-in passive PFC function compliance to EN61000-3-2
- High efficiency 89% and low dissipation
- Short circuit, over load, over voltage & over temperature protections
- Cooling by free air convection
- Built-in constant current limiting circuit
- Can be installed on DIN rail TS-35/7.5 or 15
- UL 508(industrial control equipment)approved
- EN61000-6-2(EN50082-2) industrial immunity level
- 100% full load burn-in test
-
480W Single Output DIN RAIL Power Supply
480W Single Output DIN RAIL Power Supply
Features
- AC input range selectable by switch
- Built-in passive PFC function compliance to EN61000-3-2
- High efficiency 89% and low dissipation
- Short circuit, over load, over voltage & over temperature protections
- Cooling by free air convection
- Built-in constant current limiting circuit
- Can be installed on DIN rail TS-35/7.5 or 15
- UL 508(industrial control equipment)approved
- EN61000-6-2(EN50082-2) industrial immunity level
- 100% full load burn-in test
-
480W Single Output Industrial Din Rail Power Supplies
480W Single Output Industrial Din Rail Power Supplies
Features
- Single and two phase wide input range 180~550VAC
- High efficiency 93% and low power dissipation
- Protections: Short circuit / Overload / Over voltage / Over temperature
- Cooling by free air convection
- Can be installed on DIN rail TS-35/7.5 or 15
- UL 508(industrial control equipment)approved
- EN61000-6-2(EN50082-2) industrial immunity level
- Built-in DC OK relay contact
- 100% full load burn-in test
-
480W Single Output Industrial Din Rail Power Supply with PFC and Parallel Function
480W Single Output Industrial Din Rail Power Supply with PFC and Parallel Function
Features
- Current sharing up to 3840W (7+1)
- High efficiency 94% and low power dissipation
- 150% peak load capability
- Built-in active PFC function, PF>0.94
- Protections: Short circuit/Overload/Over voltage/Over temperature
- Cooling by free air convection
- Built-in constant current limiting circuit
- Can be installed on DIN rail TS-35/7.5 or 15
- UL508 (Industrial control equipment) approved
- EN61000-6-2(EN50082-2) industrial immunity level
- Built-in DC OK relay contact
- 100% full load burn-in test
-
480W Single Output Industrial Din Rail PSU
480W Single Output Industrial Din Rail PSU
Features
- Built-in active PFC function, PF>0.92
- High efficiency 94% and low power dissipation
- Short circuit, over load, over voltage, over temperature protections
- Cooling by free air convection
- Built-in constant current limiting circuit
- Can be installed on DIN rail TS-35/7.5 or 15
- UL 508(industrial control equipment)approved
- EN61000-6-2(EN50082-2) industrial immunity level
- Built-in DC OK Relay contact
- 100% full load burn-in test
- 150% peak load capability
-
480W Three Phase Industrial DIN Rail Power Supply
480W Three Phase Industrial DIN Rail Power Supply
Features
- Three-Phase AC 340 ~ 550V wide range input
- High efficiency 89% and low dissipation
- Short circuit, over load, over voltage & over temperature protections
- Cooling by free air convection
- Built-in constant current limiting circuit
- Can be installed on DIN rail TS-35/7.5 or 15
- UL 508(industrial control equipment)approved
- EN61000-6-2(EN50082-2) industrial immunity level
- 100% full load burn-in test
-
48V 20A 2 Input Channel Din Rail 1+1 1+N Redundancy Module
48V 20A 2 input channel din rail 1+1 1+N redundancy module
-
48V 20A 960W Three Phase DIN RAIL with PFC Function
48V 20A 960W Three Phase DIN RAIL with PFC Function
-
48V 20A 960W Ultra Slim DIN Rail Power Supply
48V 20A 960W Ultra Slim DIN Rail Power Supply
-
48V 240W Slim Three Phase Industrial DIN Rail with PFC Function
48V 240W Slim Three Phase Industrial DIN Rail with PFC Function
Features
- Three phase 340 ~ 550VAC wide range input (Dual Phase operation possible)
- 63mm slim width
- Built-in passive PFC function compliance to EN61000-3-2
- High efficiency 92% and low power dissipation
- Protection: short circuit / overload / over voltage / over temperature
- Cooling by free air convection
- Full power between -30 ~ +60°C
- Built-in constant current limiting circuit
- Can be installed on DIN rail TS-35/7.5 or 15
- UL61000-6-2 (EN50082-2) industrial immunity level
- DC OK relay contact
- 3 years warranty
Sunpower’s DIN rail power supplies range is available in an array of different form factors and power ratings, starting at 10W going up to 960W with output voltages from 5 to 48 volts. All of our DIN rail power supplies are of a fan less design but each individual product has their unique functions and input characteristics, whether it be a wide or high input range, or one, two or three phase operation.
All of our products are installed on DIN rail TS35/7.5 or 15 and the majority of our DIN rail power supply units come with built-in PFC. Other features within our DIN rail power supply units include low no load power consumption, DC OK relay contact and high efficiency. A number of the larger DIN rail power supply units that we stock also have a parallel function so that current sharing can be achieved which allows for installs to be created of up to 3840W with redundancy and UPS modules also available.
Our DIN rail power supplies are designed for use in industrial, automation and process control applications and meet the requirements of UL508, for industrial control equipment and will provide the power solution to meet your necessary requirements.
To help you with any specific DIN Rail Power Supply requirements or questions Sunpower’s friendly and expert team will be happy to talk to you to discuss your options. Feel free to call us on 0118 9823746 for further information.