Din Rail Power Supplies
Showing 211–219 of 219 results
-
More information CompareICL-16L Series 16A AC Inrush Current Limiter
The ICL-16L Series is a 16A inrush current limiter that can be used to reduce the high starting current which causes the circuit breaker to be falsely triggered. Several power supplies can be installed on the same AC line after the implementation of an ICL-16.
Features
- 23A inrush limiting current, 16A continuous
- 180~264VAC AC input
- Integrated bypass relay, no simple NTC
- Internal thermal protection
- Installed on DIN Rail TS-35/7.5 or 15 (ICL-16R)
- – 30~+70°C wide working temperature
-
More information CompareICL-16R Series 16A AC Inrush Current Limiter
The ICL-16R Series is a 16A inrush current limiter that can be used to reduce the high starting current which causes the circuit breaker to be falsely triggered. Several power supplies can be installed on the same AC line after the implementation of an ICL-16.
Features
- 23A inrush limiting current, 16A continuous
- 180~264VAC AC input
- Integrated bypass relay, no simple NTC
- Internal thermal protection
- Installed on DIN Rail TS-35/7.5 or 15 (ICL-16R)
- – 30~+70°C wide working temperature
-
More information CompareKNX 10A 8 Channel Universal Actuator
The KAA-8R-10 series is a compact, 8 channel actuator suitable for various, mixed applications.
Features
- Compact, 8 channel actuator
- Suitable for various, mixed applications
- For AX, C-load, capacitive and inductive loads
- Programmable via ETS5.0 software
- Manual control via push button
- Programmable time and scene function
- 3 years warranty
-
More information Compare
KNX 16A 8 Channel Universal Actuator
The 16A KNX 8 channel Universal Actuator is suitable for different load situations and possible for many application areas with up to 8 independent channels
Features
• 8 channel actuator in a compact size
• Suitable for various and mixed applications
• For AX, C-load, capacitive and inductive of loads
• Program via ETS5.0 software
• Manual control via Pushbutton
• Programmable various time and scene function
• 3 years warranty -
More information Compare
KNX KAA-8R 8 Channel Universal Actuator
The KNX 8 channel Universal Actuator is suitable for different load situations and possible for many application areas with up to 8 independent channels
Features
- Compact, 8 channel actuator
- Suitable for various, mixed applications
- For AX, C-load, capacitive and inductive loads
- Programmable via ETS5.0 software
- Manual control via push button
- Programmable time and scene function
- 3 years warranty
-
More information CompareKSI-01U KNX USB Interface
The KNX USB Interface (KSI-01U) is a USB interface for establishing a bidirectional connection between a PC and the KNX installation bus.
Features
- No additional external power supply required
- KNX commissioning, addressing and parameters settings
- KNX protocol and system visualisation
- Diagnostic operations
- Supports long messages
- 3 years warranty
-
More information CompareKSR-01IP Series KNX IP Router
The IP TP media coupler (KSR-01IP) connects via an ethernet cable – KNX IP and KNX TP for commissioning, addressing and parameters setting, visualisation and diagnostic operations between devices on the KNX bus.
Features
- KNX IP / TP routing
- 4 KNX IP / TP tunelling
- No additional external power supply required
- Universal plug and play
- Telegram filtering
- Built-in web front-end page
- 3 years warranty
-
More information CompareTDR-240 Series 240W Slim Three Phase Industrial DIN Rail with PFC Function
TDR-240 is one economical slim 240W Din Rail power supply series, adapted to be installed on TS-35/7.5 or TS-35/15 mounting rails. The body is designed 63mm in width, which allows space saving inside the cabinets. The entire series adopts the full range AC input from 3 ψ 340VAC to 550VAC (Dual Phase operation possible) and…
Features
- Three phase 340 ~ 550VAC wide range input (Dual Phase operation possible)
- 63mm slim width
- Built-in passive PFC function compliance to EN61000-3-2
- High efficiency 92% and low power dissipation
- Protection: short circuit / overload / over voltage / over temperature
- Cooling by free air convection
- Full power between -30 ~ +60°C
- Built-in constant current limiting circuit
- Can be installed on DIN rail TS-35/7.5 or 15
- UL61000-6-2 (EN50082-2) industrial immunity level
- DC OK relay contact
- 3 years warranty
Sunpower’s DIN rail power supplies range is available in an array of different form factors and power ratings, starting at 10W going up to 960W with output voltages from 5 to 48 volts. All of our DIN rail power supplies are of a fan less design but each individual product has their unique functions and input characteristics, whether it be a wide or high input range, or one, two or three phase operation.
All of our products are installed on DIN rail TS35/7.5 or 15 and the majority of our DIN rail power supply units come with built-in PFC. Other features within our DIN rail power supply units include low no load power consumption, DC OK relay contact and high efficiency. A number of the larger DIN rail power supply units that we stock also have a parallel function so that current sharing can be achieved which allows for installs to be created of up to 3840W with redundancy and UPS modules also available.
Our DIN rail power supplies are designed for use in industrial, automation and process control applications and meet the requirements of UL508, for industrial control equipment and will provide the power solution to meet your necessary requirements.
To help you with any specific DIN Rail Power Supply requirements or questions Sunpower’s friendly and expert team will be happy to talk to you to discuss your options. Feel free to call us on 0118 9823746 for further information.