Enclosed Power Supply
Showing 271–285 of 1759 results
-
120W DC-DC DIN Rail Type Converter
DDR-120 series is a 120W DIN Rail type DC-DC converter series.
Features
- Compliance to EN50155 and EN45545-2 railway standard
- Width only 32mm
- 2:1 wide input range
- -40~+70°C wide working temperature
- 150% peak load capability
- DC output adjustable
- Cooling by free air convection
- Can be installed on DIN rail TS-35/7.5 or 15
- Protections: Short circuit / Overload / Over voltage /Input reverse polarity / Input under voltage protection
- 4KVdc I/O isolation(Reinforced isolation)
- 3 years warranty
-
120W Single Output AC-DC Enclosed Power Supply
Features
- Universal AC input with active power factor correction, P.F.>0.95
- Built in EMI filter, low ripple noise
- Over load, over voltage, short circuit protection
- Over temperature protection (Optional)
- Output voltage ±10% adjustment
- Remote Control ON/OFF (Optional)
- Non min load requirement
- 100% 50°C burn-in test
- UL, cUL, TUV, ,CB, CE pending
-
120W Single Output DIN RAIL Power Supply
120W Single Output DIN RAIL Power Supply
Features
- AC input range selectable by switch
- Installed on DIN rail TS35/7.5 or 15
- Soft start circuit
- Limiting AC surge current
- Short circuit, over voltage, over load, over temperature protections
- 100% full load burn in
- LED indication for power on
- UL508(industrial control equipment) approved
- Fixed switching frequency at 55KHz
-
120W Single Output DIN Rail Power Supply
120W Single Output DIN Rail Power Supply
Features
- Short circuit, over load, over voltage & over temperature protections
- Cooling by free air convection
- Built-in constant current limiting circuit
- Can be installed on DIN rail TS-35/7.5 or 15
- EN61000-6-2(EN50082-2) industrial immunity level
- 100% full load burn-in test
- Fixed switching frequency at 70KHz
-
120W Single Output Din Rail Power Supply with PFC Function
120W Single Output Din Rail Power Supply with PFC Function
Features
- High efficiency 91% and low power dissipation
- 150% peak load capability
- Built-in active PFC function, PF>0.93
- Short circuit, over load, over voltage, over temperature protections
- Cooling by free air convection
- Can be installed on DIN rail TS-35/7.5 or 15
- UL 508 (industrial control equipment) approved
- EN61000-6-2(EN50082-2) industrial immunity level
- Built-in DC OK relay contac
- 100% full load burn-in test
- UL / CUL / TUV / CE / CB / SEMI F47 / GL Approvals
-
120W Single Output Green Medical Grade Power Supplies
The RPS-120 series is a 120W highly reliable series of medical grade power supply, available in PCB and enclosed types.
Features
• 4″ x 2″ miniature size
• Universal AC input / Full range
• Medical safety approved (2 x MOPP between primary to secondary)
• Suitable for BF application with appropriate system consideration
• Low Leakage current
• EMI Class B for both Class I (with FG) and Class II (without FG) configuration
• No load power consumption <0.3W
• Protections: Short circuit / Overload / Over voltage/ Over Temperature
• Cooling by free air convection for 84W and 120W with 10CFM forced air
• Built-in 12V/0.5A fan supply
• Operating altitude up to 4000 metres
• 3 years warranty -
120W Single Output Industrial Din Rail Power Supplies
120W Single Output Industrial Din Rail Power Supplies
Features
- Single and two phase wide input range 180~550VAC
- High efficiency and low power dissipation
- Protections: Short circuit / Overload / Over voltage / Over temperature
- Built-in constant current limiting circuit
- Cooling by free air convection
- Can be installed on DIN rail TS-35/7.5 or 15
- UL 508(industrial control equipment)approved
- EN61000-6-2(EN50082-2) industrial immunity level
- Built-in DC OK relay contact
- 100% full load burn-in test
-
120W Single Output IP67 Rated LED Lighting Power Supply
HLG-120 Series is a developing range of 120W Single Output IP67 Rated LED Lighting Power Supplies with Universal AC input / Full range (up to 305VAC). The power supplies will have built in active PFC and of 1P65/IP67 design for indoor and outdoor installations. Other features of HLG-120 include OCP point adjustable through output cable…
Features
- Universal AC input / Full range ( up to 305VAC)
- Short circuit, over load, over voltage, over temperature protections
- Built-in active PFC function
- Cooling by free air convection
- IP67 design for indoor or outdoor installations
- Suitable for LED lighting and moving sign applications
- Optional dimming function
- Compliance to worldwide safety regulations for lighting
- Cable for I/O Connection
-
120W Single Output IP67 Rated LED Lighting Power Supply with Dimming Function
HLG-120B Series is a developing range of 120W Single Output IP67 Rated LED Lighting Power Supplies with Universal AC input / Full range (up to 305VAC). The power supplies will have built in active PFC and of 1P65/IP67 design for indoor and outdoor installations. Other features of HLG-120 include OCP point adjustable through output cable…
Features
- Universal AC input / Full range ( up to 305VAC)
- Short circuit, over load, over voltage, over temperature protections
- Built-in active PFC function
- Cooling by free air convection
- IP67 design for indoor or outdoor installations
- Suitable for LED lighting and moving sign applications
- Optional dimming function
- Compliance to worldwide safety regulations for lighting
- Constant Current Level adjustable through output cable with 1~10Vdc or 10V PWM signal or resistor
-
121.8W 42V 2.9A Single Output LED Lighting Power Supply
HLG-120 Series is a developing range of 120W Single Output IP67 Rated LED Lighting Power Supplies with Universal AC input / Full range (up to 305VAC). The power supplies will have built in active PFC and of 1P65/IP67 design for indoor and outdoor installations. Other features of HLG-120 include OCP point adjustable through output cable…
-
121.8W 42V 2.9A Single Output LED Lighting Power Supply
HLG-120B Series is a developing range of 120W Single Output IP67 Rated LED Lighting Power Supplies with Universal AC input / Full range (up to 305VAC). The power supplies will have built in active PFC and of 1P65/IP67 design for indoor and outdoor installations. Other features of HLG-120 include OCP point adjustable through output cable…
-
122.4W 36V 4A Single Output LED Lighting Power Supply
HLG-120 Series is a developing range of 120W Single Output IP67 Rated LED Lighting Power Supplies with Universal AC input / Full range (up to 305VAC). The power supplies will have built in active PFC and of 1P65/IP67 design for indoor and outdoor installations. Other features of HLG-120 include OCP point adjustable through output cable…
-
122.4W 36V 4A Single Output LED Lighting Power Supply
HLG-120B Series is a developing range of 120W Single Output IP67 Rated LED Lighting Power Supplies with Universal AC input / Full range (up to 305VAC). The power supplies will have built in active PFC and of 1P65/IP67 design for indoor and outdoor installations. Other features of HLG-120 include OCP point adjustable through output cable…
-
124.2W 54V 2.3A Single Output LED Lighting Power Supply
HLG-120 Series is a developing range of 120W Single Output IP67 Rated LED Lighting Power Supplies with Universal AC input / Full range (up to 305VAC). The power supplies will have built in active PFC and of 1P65/IP67 design for indoor and outdoor installations. Other features of HLG-120 include OCP point adjustable through output cable…
-
124.2W 54V 2.3A Single Output LED Lighting Power Supply
HLG-120B Series is a developing range of 120W Single Output IP67 Rated LED Lighting Power Supplies with Universal AC input / Full range (up to 305VAC). The power supplies will have built in active PFC and of 1P65/IP67 design for indoor and outdoor installations. Other features of HLG-120 include OCP point adjustable through output cable…
An enclosed power supply is typically perceived as the metal cased variety; the benefit of this is to stop components being exposed & in turn providing an extra measure of safety for service personnel of end user systems. Encapsulated power supplies are also included under the enclosed power supply banner on our site as they also protect components and may offer your application the most suitable specifications.
Sunpower’s enclosed power supply range offer flexible OEM power solutions from 5W to 3000W in single, dual, triple and quad outputs; our parallel units have the functionality to take this up to 9000W. Our enclosed power supplies have varied function, including full range input, active power factor correction, low no load power consumption, programmable outputs and even medical safety approval to MOOP levels; the majority of which have short circuit, over load and over voltage protections.
Whether you are looking for a high reliability miniature, PFC, modular, programmable or UPS function; from the encapsulated APC Series to the large Parallel function RSP’s you are sure to find the enclosed power supply you need from Sunpower.