Open Frame Medical Grade Power Supplies
Showing 76–90 of 207 results
-
200W Single Output Medical Open Frame Power Supply
200W Single Output Medical Open Frame Power Supply
Features
- Universal AC input / Full range
- Built-in active PFC, PF>0.95@230VAC
- Low leakage current <180µA
- Free air convection for 140W and forced air convection for 200W
- Power good and fail signal output
- Built-in remote ON-OFF control & remote sense function
- Fixed switching frequency at 100KHz
- Compliance to UL2601-1 & TUV EN60601-1 medical standards
-
20W Single Output Encapsulated Medical PSU
20W Single Output Encapsulated Medical PSU
Features
- Universal AC input / full range
- Protections: Short circuit / Overload / Over voltage
- Low leakage current <300µA
- Cooling by free air convection
- Medical Safety approved (2 x MOPP between primary to secondary)
- Ultra miniature size, light weight
- No load power consumption <0.75W
- 100% full load burn-in test
- Fixed switching frequency at 90KHZ
- High reliability
- Suitable for BF application with appropiate system consideration
- 3 years warranty
-
20W Single Output On-board Type Medical PSU
20W Single Output On-board Type Medical PSU
Features
- Universal AC input/full range
- Ultra low profile
- Low leakage current <200uA
- No load power consumption <0.75W
- Short circuit, OLP, OVP & OTP
- Fixed switching frequency at 90KHz
- UL60601-1, IEC60601-1 & TUV EN60601-1 medical safety approved
- Cooling by free air convection
-
21.6W 12V 1.8A Encapsulated Medical PSU
21.6W 12V 1.8A Encapsulated Medical PSU
-
21.6W 12V 1.8A On-Board Type Medical PSU
Featuring a low leakage current of 200uA at 264VAC this unit can be equiped into non-patient contact medical equipment and still comply with class B as per EMI regulations. With energy saving and the environment in mind the no load power consumption is lower than 0.75W so that it complies with the requirements for “green…
-
21W 15V 1.4A Encapsulated Medical PSU
21W 15V 1.4A Encapsulated Medical PSU
-
21W 15V 1.4A On-Board Type Medical PSU
Featuring a low leakage current of 200uA at 264VAC this unit can be equiped into non-patient contact medical equipment and still comply with class B as per EMI regulations. With energy saving and the environment in mind the no load power consumption is lower than 0.75W so that it complies with the requirements for “green…
-
22.08W 24V 0.92A Encapsulated Medical PSU
22.08W 24V 0.92A Encapsulated Medical PSU
-
22.08W 24V 0.92A On-Board Type Medical PSU
Featuring a low leakage current of 200uA at 264VAC this unit can be equiped into non-patient contact medical equipment and still comply with class B as per EMI regulations. With energy saving and the environment in mind the no load power consumption is lower than 0.75W so that it complies with the requirements for “green…
-
-
22W 5V 4.4A On-Board Type Medical PSU
Featuring a low leakage current of 200uA at 264VAC this unit can be equiped into non-patient contact medical equipment and still comply with class B as per EMI regulations. With energy saving and the environment in mind the no load power consumption is lower than 0.75W so that it complies with the requirements for “green…
-
24V 12.5A 300W Single Output Medical Type Power Supply
24V 12.5A 300W Single Output Medical Type Power Supply
-
27V 11.12A 300.24W Single Output Medical Type Power Supply
27V 11.12A 300.24W Single Output Medical Type Power Supply
-
30.2W 48V 0.63A Medical Encapsulated Type Power Supply
MPM-30-48 is a 30.2W 48V 0.63A high density and small sized AC/DC module type medical grade power supply offered in pin type.
Features
- 2.73″X1.53 compact size
- Medical safety approved (2 x MOPP) according to ANSI/AAMI WS60601-1 and IEC/EN60601-1
- Suitable for BF application with appropriate system consideration
- No load power consumption <0.075W
- Extremely low leakage current
- Wide operating temp range -40~+85C
- EMI Class B for Class II configuration
- Protections: Short circuit/ Overload/ Over voltage/ Over temperature
- No minimum load required
- Typical lifetime > 48K hours
- 3 years warranty
-
300W Single Output Medical Type Power Supply
300W Single Output Medical Type Power Supply
Features
- Universal AC input/Full range
- Built-in active PFC function
- Withstand 300VAC surge input for 5 seconds
- Protections: Short circuit/Overload/Over voltage/Over temperature
- Built-in 12V/0.5A auxiliary output
- 5″ x 3″ compact size
- Free air convection for 200W and 300W with 20.5CFM forced air
- With power good and fail signal output
- Built-in remote sense function
- No load power consumption under 0.5W by PS-ON control
- Standby 5V@1A with fan @ 0.6A without fan
Open Frame Medical Grade Power Supplies