Open Frame Medical Grade Power Supplies
Showing 61–75 of 207 results
-
15W Single Output On-board Type Medical PSU
Featuring class II isolation levels they can be equiped into non-patient contact medical equipment and still comply with class B as per EMI regulations. With energy saving and the environment in mind the no load power consumption is lower than 0.5W so that it complies with the requirements for “green mode” power supplies. Standard functions…
Features
- Universal AC input/full range
- Ultra low profile
- Isolation class II
- No load power consumption <0.5W
- Short circuit, OLP, OVP & OTP
- Fixed switching frequency at 67KHz
- Compliance to UL60601-1 & TUV EN60601-1 medical standards
- Cooling by free air convection
-
15W Single Output On-board Type Medical PSU
Featuring class II isolation levels they can be equiped into non-patient contact medical equipment and still comply with class B as per EMI regulations. With energy saving and the environment in mind the no load power consumption is lower than 0.5W so that it complies with the requirements for “green mode” power supplies. Standard functions…
Features
- Universal AC input/full range
- Ultra low profile
- Isolation class II
- No load power consumption <0.5W
- Short circuit, OLP, OVP & OTP
- Fixed switching frequency at 67KHz
- Compliance to UL60601-1 & TUV EN60601-1 medical standards
- Cooling by free air convection
-
160W Single Output & 5Vsb Medical Power Supply
160W Single Output & 5Vsb Medical Power Supply
Features
- Universal AC input
- Built-in active PFC function
- Short circuit, over load, over voltage, over temperature protections
- 5″x3″ compact size
- Free air convection for 110W and 160W with 20.5 CFM forced air
- With power good and fail signal output
- Built-in remote sense function for 5~15V
- No load power consumption under 0.75W by PS-ON control
- Standby 5V@1A with Fan/0.6A without Fan
- Approval: UL / CUL / TUV / CE / CB
-
160W Single Output Medical Power Supply
160W Single Output Medical Power Supply
Features
- Universal AC input
- Built-in active PFC function
- Short circuit, over load, over voltage, over temperature protections
- 5″x3″ compact size
- Free air convection for 110W and 160W with 20.5 CFM forced air
- With power good and fail signal output
- Built-in remote sense function for 5~15V
- No load power consumption under 0.75W by PS-ON control (Optional)
- Standby 5V@1A with Fan/0.6A without Fan (Optional)
- Approval: UL / CUL / TUV / CE / CB
-
161W 24V 6.5A & 5Vsb Medical Open Frame Power Supply
161W 24V 6.5A & 5Vsb Medical Open Frame Power Supply
-
161W 24V 6.5A Medical Open Frame Power Supply
161W 24V 6.5A Medical Open Frame Power Supply
-
161W 48V 3.25A & 5Vsb Medical Open Frame Power Supply
161W 48V 3.25A & 5Vsb Medical Open Frame Power Supply
-
161W 48V 3.25A Medical Open Frame Power Supply
161W 48V 3.25A Medical Open Frame Power Supply
-
19.8W 3.3V 6A Medical Encapsulated Type Power Supply
MPM-30-3.3 is a 19.8W 3.3V 6A high density and small sized AC/DC module type medical grade power supply offered in pin type.
Features
- 2.73″X1.53 compact size
- Medical safety approved (2 x MOPP) according to ANSI/AAMI WS60601-1 and IEC/EN60601-1
- Suitable for BF application with appropriate system consideration
- No load power consumption <0.075W
- Extremely low leakage current
- Wide operating temp range -40~+85C
- EMI Class B for Class II configuration
- Protections: Short circuit/ Overload/ Over voltage/ Over temperature
- No minimum load required
- Typical lifetime > 48K hours
- 3 years warranty
-
200W 12V 16.7A Medical Open Frame Power Supply
MPS-200 Series are 200W PCB type switching power supplies with active PFC function. Complying with both medical and industrial agency standards these units can deliver their full rated output of 200W with 25CFM forced are or 140W with convection cooling for either medical or industrial applications. Featuring only 180uA of leakage current at 264VAC, they…
-
200W 15V 13.4A Medical Open Frame Power Supply
MPS-200 Series are 200W PCB type switching power supplies with active PFC function. Complying with both medical and industrial agency standards these units can deliver their full rated output of 200W with 25CFM forced are or 140W with convection cooling for either medical or industrial applications. Featuring only 180uA of leakage current at 264VAC, they…
-
200W 24V 8.4A Medical Open Frame Power Supply
MPS-200 Series are 200W PCB type switching power supplies with active PFC function. Complying with both medical and industrial agency standards these units can deliver their full rated output of 200W with 25CFM forced are or 140W with convection cooling for either medical or industrial applications. Featuring only 180uA of leakage current at 264VAC, they…
-
200W 3.3V 40A Medical Open Frame Power Supply
MPS-200 Series are 200W PCB type switching power supplies with active PFC function. Complying with both medical and industrial agency standards these units can deliver their full rated output of 200W with 25CFM forced are or 140W with convection cooling for either medical or industrial applications. Featuring only 180uA of leakage current at 264VAC, they…
-
200W 48V 4.2A Medical Open Frame Power Supply
MPS-200 Series are 200W PCB type switching power supplies with active PFC function. Complying with both medical and industrial agency standards these units can deliver their full rated output of 200W with 25CFM forced are or 140W with convection cooling for either medical or industrial applications. Featuring only 180uA of leakage current at 264VAC, they…
-
200W 5V 40A Medical Open Frame Power Supply
MPS-200 Series are 200W PCB type switching power supplies with active PFC function. Complying with both medical and industrial agency standards these units can deliver their full rated output of 200W with 25CFM forced are or 140W with convection cooling for either medical or industrial applications. Featuring only 180uA of leakage current at 264VAC, they…
Open Frame Medical Grade Power Supplies