1000W Modified Sine Wave DC-AC Power Inverter

Print

Email

A300-1K0 series is a modified sine wave DC/AC inverter that can provide 1000W continuously and possesses 1200W for up to 30 minutes and 2400W of surge peak load capability. Protections for this unit include battery low alarm, battery low shutdown, battery polarity, battery over voltage protection for input side; short circuit, inverter overload, and over temperature protections for the output side. A300-1K0 series is suitable for powering many kinds of consumer electronics, home appliances, power tools, office & portable equipment and lighting equipment in vehicles, yachts, and mobile homes.

Additional information

Manufacturer

Mean Well Enterprises Ltd.

Standards

CE, E13

Type

DC/AC

Outputs

Single

Converts

DC to AC Mains Power

  • 12V or 24V DC input
  • Power ON-OFF switch
  • Input voltage range: -15% ~ +25%
  • Output voltage regulation: ±10%
  • Bat. Low alarm/Bat. Low shutdown/Over voltage/Over temp./Output short/Input polarity reverse/Overload protection
  • Output waveform: Modified sine wave
  • Cooling fan ON-OFF control
  • Topology: Microprocessor
  • Approvals: e13/ CE
  • Consumer electronics
  • Home appliances
  • Power tools
  • Office equipment
  • Portable equipment
  • Lighting equipment in vehicles, yachts, and mobile homes
Output Voltage 230Vac
Rated Output Power 1000W
Output Peak Power 1200W<30 min.
Output Surge Power 2400W
Waveform Modified Sine Wave
Frequency 50Hz ±1%
LED Indicator Green LED for power on; Yellow LED for O.T.P.; Red LED for power failure status
Over Load Protection >1200W shut down o/p voltage, re-power on to recover
Over Temperature Protection 60±5°C/ 140±9°F
Output Short Protection Shut-off
Reverse Polarity Protection By fuse open
Working Temperature 0°C ~ +30°C @100% load, 40°C @ 50% load
Working Humidity 20% ~ 90% RH non-condensing
Storage Temperature/Humidity -30°C ~ +70°C/ -22 ~ +158°F, 10 ~ 95% RH
Temperature Coefficient ±0.05% /°C (0 ~ 50°C)
Isolation Resistance I/P-O/P:100M Ohms min./ 500VDC/ 25°C/ 70% RH
EMI Condiction & Radiation Compliance to EN55022 class B, 72/ 245/ CEE, 2006/96/CE
EMS Immunity Compliance to EN61000-4-2,3
LVD Compliance to EN60950
Cooling >40°C (NTC) fan on
Standard Output Receptical Universal (F4), European & USA Versions also available
Input DC Connector 1000mm Cable terminated with 10.6mm Ring terminals
MTBF 98Khrs min. MIL-HDBK-217F (25°C)
  • CE
  • E13