Din Rail Power Supplies
Showing 16–30 of 60 results
-
More information Compare240W Single Output Industrial Din Rail Power Supplies
240W Single Output Industrial Din Rail Power Supplies
Features
- Single and two phase wide input range 180~550VAC
- High efficiency 91% and low power dissipation
- Protections: Short circuit / Overload / Over voltage / Over temperature
- Cooling by free air convection
- Can be installed on DIN rail TS-35/7.5 or 15
- UL 508(industrial control equipment)approved
- EN61000-6-2(EN50082-2) industrial immunity level
- Built-in DC OK relay contact
- 100% full load burn-in test
-
More information Compare240W Single Output Industrial Din Rail PSU
240W Single Output Industrial Din Rail PSU
Features
- Built-in active PFC function, PF>0.93
- High efficiency 93% and low power dissipation
- Short circuit, over load, over voltage, over temperature protections
- Cooling by free air convection
- Built-in constant current limiting circuit
- Can be installed on DIN rail TS-35/7.5 or 15
- UL 508(industrial control equipment)approved
- EN61000-6-2(EN50082-2) industrial immunity level
- Built-in DC OK Relay contact
- 100% full load burn-in test
- 150% peak load capability
-
More information Compare240W Three Phase Industrial DIN Rail Power Supply
240W Three Phase Industrial DIN Rail Power Supply
Features
- Three-Phase AC 340 ~ 550V wide range input
- High efficiency 89% and low dissipation
- Short circuit, over load, over voltage & over temperature protections
- Cooling by free air convection
- Built-in constant current limiting circuit
- Can be installed on DIN rail TS-35/7.5 or 15
- UL 508(industrial control equipment)approved
- EN61000-6-2(EN50082-2) industrial immunity level
- 100% full load burn-in test
-
More information Compare24V/20A DIN Rail Type Buffer Module
The DBUF20-24 is a DIN Rail mounted 20A buffer module which can be used with DIN rail power supplies to provide short term back up for the load.
Features
- Buffering with electrolytic capacitors instead of lead acid batteries
- Type buffering time of 350ms @22VDC/20A
- Buffer mode selectable by switch: Fixed mode at 22VDC – Dynamic mode for Vin-1 VDC
- LED indicator for signal status
- Supports parallel connection to extend buffering time
- Cooling by free air convection
- -25 ~+ 75°C wide operating temperature
- 3 years warranty
-
More information Compare28A AC Inrush Current Limiter
28A AC Inrush Current Limiter
Features
- 48A inrush limiting current, 28A continuous
- 180~264VAC AC input
- Integrated bypass relay, no simple NTC
- Internal thermal protection
- Installed on DIN rail TS-35/7.5 or 15 (ICL-28R)
- -30~+70°C wide working temperature
- Over voltage category III
- Operating altitude up to 5000 meters
- 3 years warranty
-
More information Compare30W DC-DC DIN Rail Type Converter
DDR-30 series is a 30W DIN Rail type DC-DC converter.
Features
- Width only 17.5mm (1SU)
- 4:1 ultra wide input range
- -40~+85°C wide working temperature
- No minimum load required
- DC output adjustable (+10%)
- Cooling by free air convection
- Can be installed on DIN rail TS-35/7.5 or 15
- Protections: Short circuit/ Overload/ Over voltage / Input reverse polarity/ Input under voltage protection
- 4KVdc I/O isolation (Reinforced isolation)
- 3 years warranty
-
More information Compare30W Single Output DIN Rail Power Supply
30W Single Output DIN Rail Power Supply
Features
- Universal AC input/Full range
- Short circuit/Over Load/Over voltage protection
- Cooling by free air convection
- Can be installed on DIN rail TS-35/7.5 or 15
- Isolation Class II
- LED indicator for power on
- 100% full load burn-in test
-
More information Compare30W Single Output Slimline DIN Rail Power Supplies
30W Single Output Slimline DIN Rail Power Supplies
Features
- Ultra slim design with 35mm (2SU) width
- Universal input 85~264VAC (277VAC available)
- No load power consumption <0.3W
- Isolation class II
- Pass LPS (Limited power source)
- DC output voltage adjustable
- Protections: Short Circuit / Overload / Over voltage
- DIN rail TS-35/7.5 or 15 mountable
- Cooling by free air convection
- (working temperature: -30 ~ +70C)
- Led indicator for power on
- 3 years warranty
-
More information Compare40A Uninteruptable Power Supply
40A max DC UPS (battery control) module, for 24Vdc power system. Accompanied by external batteries (not included), it can back-up up to 40A of current to critical loads for a period of time dependant on the capacity of batteries. With complete monitoring signals and LED indicators for DC BUS OK, Battery Fail, Battery Discharge, and…
Features
- Battery controller for DIN Rail UPS system
- Parallel connection to DC BUS
- Suitable for 24V system up to 40A
- Can be installed on DIN Rail TS35 / 7.5 or 15
- Built-in battery test function
- Battery polarity protection
- Relay contact signal output and LED indicator for DC BUS OK,Battery OK, and Battery Discharge
- Cooling by free air convection
-
More information Compare40W Miniture Single Output Industrial Din Rail PSU
40W Miniture Single Output Industrial Din Rail PSU
Features
- Universal AC input, full range
- Short circuit, over load, over voltage protections
- Cooling by free air convection
- Can be installed on DIN rail TS-35/7.5 or 15
- Built in DC OK relay contact
- LED indicator for power on
- DC OK Relay contract
- 100% full load burn-in test
- No load power consumption <0.75W
-
More information Compare40W Single Output Switching DIN RAIL Power Supplies
40W Single Output Switching DIN RAIL Power Supplies
Features
- Universal AC input range
- Built in 3 in dimming function (1-10Vdc, PWM signal or resistive)
- Can be installed on DIN rail TS-35/7.5 or 15
- LED indicator for power on
- Cooling by free air convection
- 3 years warranty
-
More information Compare40W Single Output Switching DIN RAIL Power Supplies with UPS Function
40W Single Output Switching DIN RAIL Power Supplies with UPS Function
Features
- Universal AC input
- Secondary output for battery charging (UPS Function)
- Battery low protection/Battery polarity protection by fuse
- Alarm signal for AC OK and Battery low
- Can be installed on DIN rail TS-35/7.5 or 15
- Short circuit, over load, over voltage protections
- Cooling by free air convection
- LED indicator for power on
- 3 years warranty
-
More information Compare45W Single Output DIN Rail Power Supply
45W Single Output DIN Rail Power Supply
Features
- Full range AC input
- High efficiency, low working temp.
- Built in EMI filter, low ripple noise
- Compact size, light weight
- Short circuit, over load, over voltage, over temperature protected
- Fixed switching frequency at 100KHz
- UL 508 approved
- Can be installed on DIN rail TS35/7.5 or 15
-
More information Compare480W Single Output DIN RAIL Power Supply
480W Single Output DIN RAIL Power Supply
Features
- Built-in passive PFC function compliance to EN61000-3-2
- High efficiency 89% and low dissipation
- Short circuit, over load, over voltage & over temperature protections
- Cooling by free air convection
- Built-in constant current limiting circuit
- Can be installed on DIN rail TS-35/7.5 or 15
- UL 508(industrial control equipment)approved
- EN61000-6-2(EN50082-2) industrial immunity level
- 100% full load burn-in test
-
More information Compare480W Single Output DIN RAIL Power Supply
480W Single Output DIN RAIL Power Supply
Features
- AC input range selectable by switch
- Built-in passive PFC function compliance to EN61000-3-2
- High efficiency 89% and low dissipation
- Short circuit, over load, over voltage & over temperature protections
- Cooling by free air convection
- Built-in constant current limiting circuit
- Can be installed on DIN rail TS-35/7.5 or 15
- UL 508(industrial control equipment)approved
- EN61000-6-2(EN50082-2) industrial immunity level
- 100% full load burn-in test
Sunpower’s DIN rail power supplies range is available in an array of different form factors and power ratings, starting at 10W going up to 960W with output voltages from 5 to 48 volts. All of our DIN rail power supplies are of a fan less design but each individual product has their unique functions and input characteristics, whether it be a wide or high input range, or one, two or three phase operation.
All of our products are installed on DIN rail TS35/7.5 or 15 and the majority of our DIN rail power supply units come with built-in PFC. Other features within our DIN rail power supply units include low no load power consumption, DC OK relay contact and high efficiency. A number of the larger DIN rail power supply units that we stock also have a parallel function so that current sharing can be achieved which allows for installs to be created of up to 3840W with redundancy and UPS modules also available.
Our DIN rail power supplies are designed for use in industrial, automation and process control applications and meet the requirements of UL508, for industrial control equipment and will provide the power solution to meet your necessary requirements.
To help you with any specific DIN Rail Power Supply requirements or questions Sunpower’s friendly and expert team will be happy to talk to you to discuss your options. Feel free to call us on 0118 9823746 for further information.