Din Rail Power Supplies
Showing 31–45 of 219 results
-
120W Single Output Industrial Din Rail Power Supplies
120W Single Output Industrial Din Rail Power Supplies
Features
- Single and two phase wide input range 180~550VAC
- High efficiency and low power dissipation
- Protections: Short circuit / Overload / Over voltage / Over temperature
- Built-in constant current limiting circuit
- Cooling by free air convection
- Can be installed on DIN rail TS-35/7.5 or 15
- UL 508(industrial control equipment)approved
- EN61000-6-2(EN50082-2) industrial immunity level
- Built-in DC OK relay contact
- 100% full load burn-in test
-
12V 20A 2 Input Channel Din Rail 1+1 1+N Redundancy Module
12V 20A 2 Input Channel Din Rail 1+1 1+N Redundancy Module with DC OK alarm signal on both input channels. Suitable for 1+1, 1+N Redundancy applications or for increased reliability single units applied in parallel.
-
12V 60W Ultra Wide Input DIN Rail DC-DC Converter
DDRH-60-12 Series is a 150 ~ 1500Vdc ultra-high input DIN rail type DC-DC converter which can supply stable working voltage for the load.
Features
- 150 ~ 1500 VDC 10:1 ultra wide input range
- 57mm slim width
- 4kVAC I/O high isolation (reinforced isolation)
- Protections: short circuit, overload, over voltage, over temperature, DC input under voltage, DC input reverse polarity
- Cooling by free air convection
- Can be installed on DIN rail TS-35/7.5 or 15
- -30 ~+ 80°C wide operating temperature ( > +55°C derating )
- Over voltage category II
- Operating altitude up to 5000 meters
- DC OK relay contact
- DC output voltage adjustable (+20%)
- 3 years warranty
-
12V 60W Ultra Wide Input Industrial DIN Rail Power Supply
WDR-60-12 is a 60W DIN rail power supply with ultra-wide AC input range, suitable for industrial automation, surveillance and telecommunication applications.
Features
- 180 ~ 550VAC ultra wide input for 1-phase or 2-phase
- 32mm slim width
- 4.7KVAC I/O high isolation (reinforced isolation)
- Protections: short circuit / overload / over voltage / over temperature
- Cooling by free air convection
- Can be installed on DIN rail TS-35/7.5 or 15
- -30~+85°C ultra wide operating temperature (>+60°C derating)
- Over voltage category III
- DC OK relay contact
- DC output voltage adjustable (+20%)
- 3 years warranty
-
12W 5V 2.4A Class II DIN Rail Power Supply
DR-15 Series is a 12W~15W single output Class II DIN Rail power supply with no load power consumption
-
12W 5V 2.4A Slimline Din Rail Power Supply
12W 5V 2.4A Slimline Din Rail Power Supply
-
15.2W 24V 0.63A Class II DIN Rail Power Supply
DR-15 Series is a 12W~15W single output Class II DIN Rail power supply with no load power consumption
-
15.2W 24V 0.63A Slimline Din Rail Power Supply
15.2W 24V 0.63A Slimline Din Rail Power Supply
-
15.4W 48V 0.32A Slimline Din Rail Power Supply
15.4W 48V 0.32A Slimline Din Rail Power Supply
-
15W 12V 1.25A Class II DIN Rail Power Supply
DR-15 Series is a 12W~15W single output Class II DIN Rail power supply with no load power consumption
-
15W 12V 1.25A DC-DC DIN Rail Type Converter
DDR-15G-12 is a 15W 12V 1.25A DC-DC DIN rail type converter equipped with DIN rail mounting brackets for fast and convenient installations.
Features
- Width only 17.5mm (1SU)
- 4:1 ultra wide input range
- -40~+85°C wide working temperature
- No minimum load required
- DC output adjustable (+10%)
- Cooling by free air convection
- Can be installed on DIN rail TS-35/7.5 or 15
- Protections: Short circuit/ Overload/ Over voltage / Input reverse polarity/ Input under voltage protection
- 4KVdc I/O isolation (Reinforced isolation)
- 3 years warranty
-
15W 12V 1.25A Slimline Din Rail Power Supply
15W 12V 1.25A Slimline Din Rail Power Supply
-
15W 15V 1A Class II DIN Rail Power Supply
DR-15 Series is a 12W~15W single output Class II DIN Rail power supply with no load power consumption
-
15W 15V 1A DC-DC DIN Rail Type Converter
DDR-15G-15 is a 15W 15V 1A DC-DC DIN rail type converter equipped with DIN rail mounting brackets for fast and convenient installations.
Features
- Width only 17.5mm (1SU)
- 4:1 ultra wide input range
- -40~+85°C wide working temperature
- No minimum load required
- DC output adjustable (+10%)
- Cooling by free air convection
- Can be installed on DIN rail TS-35/7.5 or 15
- Protections: Short circuit/ Overload/ Over voltage / Input reverse polarity/ Input under voltage protection
- 4KVdc I/O isolation (Reinforced isolation)
- 3 years warranty
-
15W 15V 1A Slimline Din Rail Power Supply
15W 15V 1A Slimline Din Rail Power Supply
Sunpower’s DIN rail power supplies range is available in an array of different form factors and power ratings, starting at 10W going up to 960W with output voltages from 5 to 48 volts. All of our DIN rail power supplies are of a fan less design but each individual product has their unique functions and input characteristics, whether it be a wide or high input range, or one, two or three phase operation.
All of our products are installed on DIN rail TS35/7.5 or 15 and the majority of our DIN rail power supply units come with built-in PFC. Other features within our DIN rail power supply units include low no load power consumption, DC OK relay contact and high efficiency. A number of the larger DIN rail power supply units that we stock also have a parallel function so that current sharing can be achieved which allows for installs to be created of up to 3840W with redundancy and UPS modules also available.
Our DIN rail power supplies are designed for use in industrial, automation and process control applications and meet the requirements of UL508, for industrial control equipment and will provide the power solution to meet your necessary requirements.
To help you with any specific DIN Rail Power Supply requirements or questions Sunpower’s friendly and expert team will be happy to talk to you to discuss your options. Feel free to call us on 0118 9823746 for further information.